ReviewsSteel Ball Valve

RAINPAL RBS006 Stainless Steel Rain Barrel Spigot (Quarter Turn Ball Valve)

  • Attention: Inside Access Needed to Install the Nut.
  • Stainless Steel 304 Body w/ Aluminum Alloy Handle. No Lead, Corrosion Resistant..
  • Stainless Steel Quarter Turn Ball Valve, Turn Right to close..
  • For all ball valve, there is a chamber around the ball may trap water. May contain water from testing, which is normal..
  • Fit up to 1/4 inch thickness wall, 10 mm water flow opening, With Garden Hose Hook up. Need 21mm or 7/8 inch hole saw to install..
Check Stock

Motorized Ball Valve- 1/4 Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid

  • SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- 1/4” Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch cuts off power after valve is fully open....
  • 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

Shower head Shut Off Valve ,Water Flow Control Valve,Stainless Steel Valve NPT Thread(1/2\ Female X 1/2\ Male)

  • All parts of shower flower control valve are made of high-quality stainless steel, (stainless steel body, stainless steel handle, stainless steel ball) stronger and more corrosion resistant than brass and plastic..
  • The stainless steel water flow control valve is designed with a single lever. It can be turned on and off by only turning 90 degrees. Even if the hand is full of foam, the water flow can be easily adjusted and closed..
  • The 1/2" standard NPT thread can match most shower pipes and shower heads in the United States..
  • This stainless steel ball valve can be installed on hand showers, shower hoses, and pipes. Widely used in at home, bathroom, kitchen, RV, etc..
  • Good after-sales service: If you have any questions, please contact us for a refund or replacement..
Check Stock

MASTERCOOL 58490-YF Universal R1234yf Valve Core Remover/Installer Master Kit Brass,Silver,Red,Blue

  • PERFECT TOOL for replacing damaged valve cores with R1234yf refrigerant in the system without losing the systems charge.
  • ATTACHES TO R1234yf SERVICE PORTS to quickly and easily remove and replace valve cores without the loss of refrigerant.
  • BALL VALVE DESIGN with stainless steel ball provides smooth movement and durability.
  • KIT COVERS 17 mm and 14 mm high and low side service ports.
  • INCLUDES standard valve core shaft, GM large bore valve core shaft, Eaton R134a/R1234yf high side valve core shaft, low side 14 mm connector, high....
Check Stock

Round Metal Hydraulic Reservoir (6 Quart) (To insure proper fit check dimensions in image at left.)

  • 1x11 STAINLESS STEEL Tank Tee with UNIOn.
  • Liquid Filled Stainless Steel Pressure Gauge.
  • 1/2" Stainless Steel Pressure Relief Valve.
Check Stock

Mini Ball Valve 1inch NPT Female Male Thread 316 Stainless Steel Air Liquid Steam Shut-Off Valve

  • MATERIAL: this ball valve is made of 316 stainless stell material for higher corrosion resistance.
  • TWO DIRECTIONS: Inline valve for connecting two pipes going in the same direction.
  • Double-seal system allows flow to go in either direction.
  • WIDE APPLICATION: our steel Ball valves can be widely used in various air, liquid, and steam applications.
  • EASY TO OPERATE: Ball valves is designed with On/ Off switch and quarter-turn easy operation for manual control.
  • CONNECTION: 1 inch standard connections, which makes mini ball valve suitable for most pipes.
Check Stock

Megairon 316 Stainless Steel 2" Full Port Ball Valve with Blue Vinyl Handle, NPT Female x Female Thread,1000 WOG(US Stock)

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
  • Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
  • This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
Check Stock

Motorized Ball Valve- 1 Stainless Steel Electrical Ball Valve with Full Port 9-24V DC and 5 Wire Setup can be used with Indicator Lights [Indicate Open or Closed Position] by U.S Solid

  • SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING-1" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully....
  • 5 WIRE INDICATOR LIGHTS SETUP- 5 Wire setup allows for easy operation and indicators for when the valve is fully open or fully closed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically reduces power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great....
Check Stock

Gralara High Pressure Washer Ball Valve Quick Connector High Pressure Resistance for Agricultural Irrigation, 1 of 4inch

  • STURDY DESIGN: Made of durable steel material, this ball valve is specifically designed for pressure washing machine hoses that need to handle high pressure ratings up to 4500 PSI and a maximum temperature of 60 degrees Celsius..
  • VERSATILE: Perfect for car wash, patio, siding, and deck cleaning jobs, this high-pressure washer valve switch makes cleaning tasks quick, easy, and efficient..
  • QUICK CONNECTOR: This high pressure washer ball valve kit comes with a 3/8" quick connector and plug for easy attachment to your sprayer, nozzles, pumps, and hoses..
  • COMPATIBILITY: The adapter's thread size is 3/8 NPT, not G 3/8 (3/8 BSP)..
  • EASY TO USE: This ball valve switch is designed for easy opening and closing, and provides tremendous leverage under high pressure..
Check Stock

Motorized Ball Valve- 1/2 Stainless Steel Electrical Ball Valve with Full Port 9-24V AC/DC and 3 Wire Setup by U.S Solid

  • SAFE AND RELIABLE- The valve body is made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock