ReviewsSteel Casting Valve Part

DK SONIC Ultrasonic Cleaner with Heater,Timer and Basket for Lab Tools, Metal Parts, Carburetor, Fuel Injector, Brass, Auto Parts, Engine Parts, etc (10L, 110V)

  • 40KHz Ultrasonic Frequence for Intensive Rinse: 40KHz ultrasonic frequency can be used to clean stuffs with complicated surfaces, such as blind holes and deep holes etc..
  • SUS304 Stainless Steel Drain Valve and Die-casting Tank: Both the cleaning tank and drain valve of the device are made with SUS304 stainless steel materials, and that makes the device be resistant to weak acid and weak alkali..
  • User-friendly Control Panel with Simple Mechanical Controllers: The devices are equiped with two simple mechanical industrial controllers which have a long service life and make the devices be operated easily..
  • Always ON or Free time setting among 0~20 minutes: Extensive time-setting range makes the device be freely set to work for any certain time based on the characters of the stuffs to be cleaned..
  • 20~80°C Heating Range for Degreasing and Dewaxing: Heating function is helpful for reducing the adhesion strength of oil and wax so as to improve the cleaning effect, and generally the best cleaning temperature is among 40~60°C, i.e. 104~140°F..
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

WOOSTAR 52.4mm Complete Cylinder Head 66mm Valves Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Go Kart Dirt Bike

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock

JDMSPEED New Engine Valve Cover With Gaskets Left & Right Side Replacement For Altima Maxima Murano I35 V6 3.5L 2002-2007 Replace# 264-985 264-984 13264-8J113 13264-7Y000 (Set of 2)

  • This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Direct replacement for a proper fit every time. Provides a tight, lasting seal against oil leaks. High quality plastic, steel, or aluminum construction resists warping, cracking and porousness.
  • Package Includes: 2 Engine Valve Covers (LH+RH), 2 Engine Valve Cover Gaskets (LH+RH), 6 Spark Plug Tube Seals.
  • Replace Part Number: Left Valve Cover 13264-7Y010, 13264-8J113, 13264-ZA30A, 264-985.
  • Right Valve Cover 13264-7Y000, 13264-8J102, 264-984.
  • Replacement For Infiniti I35 V6 3.5L (3498cc) 2002-2004.
  • Replacement For Altima V6 3.5L (3498cc) 2002-2006.
  • Replacement For Maxima V6 3.5L (3498cc) 2002-2008.
  • Replacement For Murano V6 3.5L (3498cc) 2003-2007.
  • Replacement For Quest V6 3.5L (3498cc) 2004-2009.
  • Easy and ready for installation. Instruction is not included. Professional installation is recommended.
Check Stock

GM REMANUFACTURED 4.8L 5.3L Cylinder Head 706 Assembly w/Rocker Arms LS LR4 LM7 LM4 NO CORE CHARGE NECESSARY

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock

GM REMANUFACTURED 4.8L 5.3L Cylinder Head 862 Assembly w/Rocker Arms LS LR4 LM7 LM4 NO CORE CHARGE NECESSARY

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • ...itable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motorcycles, ATVs, cars, and other small engines..
  • Valve Spring Compressor Set included:(5) Metric collets – 16mm, 19mm, 23mm, 25mm, 30mm, (3)....
Check Stock

Frienda 4 Pieces White Dice Style Tire Valve Stem Caps and 4 Pieces Black Dice Style Tire Valve Stem Caps,Wheel Valve Stem Caps for Car

  • Package included: you will get 4 pieces of white dice style tire valve stem and 4 pieces of black dice style tire valve stem,they are 0.63 x 0.63 inches / 1.6 x 1.6 cm.
  • Dust-proof: these dice style tire valve stem are dustproof,they can prevent the air nozzle from being corroded by being covered with clay or snow, and the air will leak when pumping air.
  • ABS material: our dice style tire valve stem made of macromolecule ABS material, internal copper core, good quality, never rust, stable thread, anti-leakage and dust-proof design.
  • Wide range of use: these dice style tire valve stem suitable for any car, truck, bicycle, motorcycle, atv with standard valve stem,made with high-performance new engineering materials and precision casting technology.
  • Safety design: our dice style tire valve stem specially designed for dice style tire valve stem,tightly fastened and safer,thread stability,let your family and friends feel more at ease.
Check Stock

Hromee Tire Valve Stem Tool Puller and Installer Kit, 4PCS TR413 Tubeless Snap-in Valve Stem with Valve Stem Cores, Single Head Valve Core Remover and Slotted-Head Valve Cap

  • ... designed with a off-set and pivoting head, more convenient and easier to use. There is the thread inside the swivel head for screwing into cap that makes you install and remove valve stems without removing the valve core. The pivoting head is for optimal angle..
  • PROTECTIVE DESIGN - On the handle part knurled finish steel is designed for increasing friction and ensure safety while using. The rubber bumper is for protecting wheel and rim from damage. 12.6-inches long to provide more leverage necessary to remove stubborn valve stems with less effort. This remover and installer definitely a good helper for changing the valve stem..
  • TR413 VALVE STEM - Snap-in rubber car tire valve stems for tubeless 0.453” (11.5mm) diameter rim holes. Outside EPDM rubber is for ozone resistance. Apply for 65 PSI max cold inflation pressure and max rim thickness of 0.156”. fits cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
  • Slotted-Head Valve Cap - 2 Pieces of valve remover caps are equipped in this kit. 2 in 1 valve caps are made of premium material, strong and durable to use. The top slot head can be used to remove valve cores and the bottom can be used as tire caps to prevent air leaking and dust. The little caps are made of hig....
Check Stock

Yongxingjin Metal Tire Valve Stem Caps Suit for Toyota TRD All Models car Accessories Stylish car Wheels air caps with Logo 2021122814

  • The valve cover is made of aluminum alloy, which is corrosion-resistant and durable..
  • One time die casting, surface exquisite electroplating, avoid metal oxidation, rust, effectively improve wear resistance, texture and gloss..
  • With the Rubber Seals inside，the cap can replace the original bad valve cap of the tyre and also show the beauty characteristic of the tyre. your tire valves, extend their serving life. of the tyre and also show the beauty characteristic of the tyre..
  • Protecting the valve core , corrosion due to direct contact with clay, water and snow..
  • Package included 4 valve caps. Any assistance,pls feel free to contact us..
Check Stock

The Dinghy Song

  • ...rope plus splash guard around edge limits water spray inside boat.
  • PREMIUM QUALITY: Hull made from high quality crisp white PVC fabric w/ UV treatment, .9mm/1100D. Floor made from aluminum framed marine grade coated plywood provides a solid and stable surface for standing, casting, and planing. Seams are HEAT WELDED using the latest technology.
  • INCLUDED IN BOX: PVC Boat Hull, Aluminum framed marine wood floor, one aluminum bench seat, 2 aluminum oars, storage bag, foot pump, 2 repair patches plus valve wrench, 1 front carry D ring plus 2 rear exterior sturdy carrying handles, port and starboard front towing D-rings.
  • USCG APPROVED. Manufacturer Certificate of Origin and Vessel Bill of Sale for boat registration can be requested upon delivery directly from Newport. 2 Year Manufacturer Limited Warranty. California based company, selling high quality boats since 2009.
Check Stock