ReviewsSteel Chuck

Minimprover 6PCS Heavy Duty Brass Air Chuck Set,1/4 Closed Ball Air Chuck & 1/4 Inch Female NPT Dual Head Air Chuck & 1/4 Closed Flow Tire Chuck with Air Hose Quick Connect Adapter

★ 【Material】- All the products are made of Solid Brass construction. Compared with stainless steel and plastic, it is more corrosion-resistant....
★ 【Chucks' Size】- 1.The closed flow air chuck has 1/4" FNPT air inlet,ball air chuck function is to enable the shutoff valve to shut down the....
★ 【Adapters' Size】- 1/4" Coupling x 1/4" Male NPT Threaded Full Flow Quick Connect which can be used with the 1/4" Female NPT air chuck..
★ 【Package Include】- 1 x closed flow air chuck,1 x closed flow tire chuck,1 x dual head air chuck with 3 x air hose quick connect adapter..
★ 【No worries Shopping】- Buy With Total Confidence. Since customer satisfaction is our top priority, we want to make sure you are completely....

Check Stock

Stalwart 75-3990A 5.0 Amp 120V Hammer Drill, 1/2'

Includes: Impact Drill/Driver, Removable 360 Pistol Grip Handle, Chuck Wrench, Chuck Wrench Holder, Depth Rod.
Power Input: 550 Watt, Rated Amperage: 5.0 Amps, Rated Voltage: 120 V, Rated Frequency: 60 Hz.
Speed: 0-3000 R/min, Chuck Capacity: 0.5 inch (13mm).
Estimated Maximum Drilling Diameter: In Steel: 0.4 inch (10mm), In Wood: 1 inch (25mm), In Concrete: 0.5 inch (13mm).
Drill Dimensions: Length: 2.5 Inch, Width: 10 Inch, Height: 8 Inch.

Check Stock

PSI Woodworking CF3SC 3\ Lathe Faceplate/Screwchuck for 1\ x 8tpi Spindle

(4) mounting holes with additional screw chuck option.
Includes (2) 1" screw chucks and (8) spare mounting screws.
Combination of screw chuck & faceplate mount provides a very safe & secure bowl turning setup.

Check Stock

PHUKIMLONG CKS275 2-3/4 Inch Wood Lathe Chuck Set with 1\-8TPI Includes 2.75 Gear Chuck 5 Interchangeable Jaws, 1 Wood Screw,3 Years Warranty

PRODUCT INCLUDES: (1) 2.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with 8Ea*short and 8Ea*long multi-position grip-studs.
Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
Application: This CKS275 2-3/4"Wood Lathe Chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..

Check Stock

LEZYNE Shock Digital Drive Floor Pump, Silver

High Pressure ultra-narrow barrel provides efficient tuning up to 300 psi..
CNC machined aluminum and steel construction with varnished wood handle..
High-grade, nylon-reinforced braided hose with aluminum couplers..
Ultra precise, hardened steel ABS chuck. Chuck features rapid-release, or fine-release, tuning and an innovative zero-loss disengagement mechanism..
Extremely accurate digital gauge. Presta valve compatible..

Check Stock

4PCS 12" Braided Dual Tire Valve Extension Stem + 90 Degree Extender Rod For Truck RV Trailer Wheel 300mm

4pcs 12 inch Valve stem extension +4PCS 90 degree can be applied to various types of vehicles with a single tire width of less than 12 inch, or a dual tire width of less than 12 inches. Small and convenient, easy to carry, suitable for fast inflating the vehicle in any situation..
High-strength carbon steel U-shaped chuck and screw design. The U-shaped chuck can be fixed on hubs of different sizes (0-0.59inch). The chuck is tightly locked on the hub by rotating the screw, which prevents the extension stem from falling off the valve core..
Our connector adopts a 360-degree rotating universal size, which can fit 99% of the valve cores and air pumps of car models. For example: RVs, truck, bicycles, car, Balance car, motorcycles, ATVs, Trailer and more..
The Valve Extension Stem Rod uses 304 stainless steel braided flexible hose and arrow-shaped weaving technology. The precise weaving technology protects the inside of the product from damage and improves the service life of the product..
Package included:4pcs 12 inch Valve Extension Stem + 4PCS U-Chuck +4pcs 90 Degree Stem.

Check Stock

JET JBM-5 Benchtop Mortiser, 1/2HP, 115V 1PH, 1750 RPM (708580)

Durability and Stability: Heavy-duty cast iron and steel construction..
Accurate Position Control: Dependable rack-and-pinion head adjustment..
Optimal Handle Position: Long, multi-position mortising handle lets you reposition the feed handle for easier operation..
Three-Jaw Drill Chuck: Keeps a positive grip on mortising bits with up to 3/8" diameter shanks..
Easy Chuck Changes: Two hinged side doors allow easy access to the drill chuck..

Check Stock

0.3-3.2 Clamping Grinder Chuck Key M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..

Check Stock

Mophorn Lathe Chuck 4inch “C” Series Chuck Self-centering Lathe Chuck Independent 4 Jaws Mini Lathe Chuck Wood Lathe Bowl Chuck for Woodworking Chuck

Premium Quality: The Chuck body is made of quality steel. All guideways and bearing surfaces are precisely machined for better performance. It has high strength and toughness, compression resistance and durability, and long service life..
Self-Centering Chuck: Each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized. Round Claw Clamping Range: 1.5"/38 - 2.4"/62 mm mm. Round Claw Support Range: 1.9"/48 - 2.9"/74 mm..
Considerate Design: Chuck diameter: 4 inch / 100 mm compact structure is easy for you to carry, store and operate. We give a universal adapter as a gift for kinds of countries to use, and the precise thread inside and texture outside make the whole looks more pretty..
Complete Accessories: Includes screw chuck stud. It also includes an T-shaped Allen wrench and a set of tightening levers, which give a great help to chuck installation and removal..
Wide Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine access....

Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Warehouses Offices(Short tail M8x0.75 chuck + rod set)

Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..

Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Car Garages(Short tail M8x0.75 chuck + rod set)

Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..

Check Stock