ReviewsSteel Conduit Fittings

IRWIN Tools VISE-GRIP Locking Pliers, Fast Release, Curved Jaw with Wire Cutter, 5-Inch (9T)

  • Can ream and smooth inside and outside of conduit.
  • Ideal for liquid tight fittings and caps.
  • One-handed, trigger less release is twice as easy to open as the traditional design. Constructed of high-grade heat-treated alloy steel..
  • ProTouch grip provides maximum torque with greater comfort and less hand fatigue, and is slip resistant..
  • Adjust pressure and work fit with turn screw that stays adjusted for repetitive use..
  • Curved jaw is great for securely gripping and torqueing multiple surfaces shapes, such as round pipe, square and hex fasteners and much more..
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

Diversitech VTS-12 Solder Type with 3/4\ Outer Diameter (Pack Of 1)

  • The Product Is A Af, S/T, 3/4In Od, Pk Of 1.
  • Highly Durable Product For The Purpose Of Use For Pipe And Conduit, Pipe-Fittings.
Check Stock

Channellock 209 9-Inch Oil Filter and PVC Plier (4-Pack)

  • Accommodates most common size car and small engine filters.
  • PermaLock fastener eliminates nut and bolt failure.
Check Stock

Channellock 209 9-Inch Oil Filter and PVC Plier (3-Pack)

  • Accommodates most common size car and small engine filters.
  • PermaLock fastener eliminates nut and bolt failure.
Check Stock

Channellock 209 9-Inch Oil Filter and PVC Plier

  • Accommodates most common size car and small engine filters.
  • PermaLock fastener eliminates nut and bolt failure.
Check Stock

Leviton 42777-1WA Surface Mount Backbox, Single Gang, White, Box Depth Is 1.89 Inches

  • For use with conduitDescriptionThomas & Betts 583611/2-30 Single Gang Utility BoxThomas & Betts 583611/2-30 Single Gang Utility Box Features:Three 1/2" each side conduit knockoutsOne 1/2" each end conduit knockoutsTwo 1/2" bottom conduit knockoutsFactory provided raised ground screw locationSteel13.0 cubic inch capacity1-7/8" deep with conduit knockouts.
Check Stock

Channellock OF-1 2-Piece Oil Filer/PVC Plier Gift Set: 12-Inch and 15-Inch

  • Set Includes: 12" & 15.5" Oil Filter/ PVC plier.
  • Accommodates most car, truck and heavy equipment filters.
  • PermaLock fastener eliminates nut and bolt failure.
Check Stock

Crescent C10CV 10-Inch Curved Jaw Locking Plier with Wire Cutter

  • Can ream and smooth inside and outside of conduit.
  • Ideal for liquid tight fittings and caps.
  • Has an integral wire cutter for increased versatility..
  • Compound action for powerful non-slip locking grip..
  • Precisely machined ferrule for fine jaw adjustment..
Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

  • SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
  • DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
  • IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock