ReviewsSteel Drywall

Economy Floor Tape Applicator - 1MDL9

  • ...er compounds, will make the putty better adhere to the tape. Serrated tip blade can easily and quickly cut off the tape. Easy thumb screw adjustable valve in the front controls how much compound is applied. Strong heavy duty lid clamps will lock firmly to prevent liquid leakage.
  • 【Blue Steel Taping Knife】10" wide drywall knife made of blue steel for maximum flexibility to reduce hand fatigue and make a better finish and faster application rates. Rigid back plates wider and thicker than most competitive models.
  • 【Comfortable】Drywall Banjo board taping tool are designed with on handle strap on left for easy carrying and one wood handle on top for comfortable grip, which is labor-saving and high-efficiency. The blue steel taping knife is designed with soft handle with hanging hole, very comfortable to use and easy storage.
  • 【Application】Goldblatt original wet tape Banjo is the drywall tapers best friend, holding up to a 500' roll of drywall tape and enough compound to tape 40' between fills. Note: ROLL OF TAPE NOT INCLUDED! Suitable for smaller work, decoration, addition, renovation or narrow spaces, such as closets, corners, walls and ceilings..
Check Stock

Drywall Lift Panel 11FT Drywall Lift Panel Hoist Drywall Panel Hoist Construction Tools with Adjustable Telescopic Arm, Rolling Caster Wheel Lockable, 150 lbs

  • [Saving Labor] This Drywall Lift is very Suitable for Interior Decoration of Houses. A Person can Lift Drywall and Ceilings by Operating the Panel Lift Alone. The Panel Lifts are Easy to Position and Adjust to Place them Exactly Where I Need Them..
  • [Upgrade fixed Lock Parts] This drywall lift has an Upgraded Device for Fixing the Bottom Foot Plate. The Old Drywall Lift uses Bolts to fix the Wheel Feet, and the Loosening of the Screws over time may Cause Safety Hazards. Our New Drywall Lift Adopts a Bolt-type Method to fix the Wheel Foot Plate, and the Bolt Corresponds to the fixed Hole, so that it is Firmly fixed and will not Slide..
  • [150LBS 11' Drywall Lift ] Drywall Lift-heavy Steel Structure, maximum load capacity is 150 pounds. Apply various Drywall panels up to 4ftx8ft..
  • [Adjustable Telescopic Arm and Panel Rotation] The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings..
  • [Simple Disassembly and Assembly] This Drywall Lift has a Simple Structure and is very Easy to Assemble and is not Complicated. A person can Quickly install and put it into ....
Check Stock

The Hillman Group 47667 8 x 3-Inch Coarse Thread Drywall Screw Phillips Drive, Black

  • For use with drywall in interior applications.
  • Fine tipped screw and bugle head for a clean finish.
  • Phosphate coated for improved paint and mud adhesion.
  • User-friendly and easily gripped and held.
Check Stock

FastCraft 14pc Multi Tool, Oscillating Tool Kit, PRO Saw Model 86225-1 (5.0Amp PEAK GUARANTEED POWER Rated 2.4A Keyless Blade Change 6 Speeds 3-4 Angle Cutting + 13pc Blades/Carbide PRO Grade - BULK PACKAGING [No Box] FastCraft the High End Brand at Costco

  • ...t, concrete surfaces, mortar, hardened adhesive, glass, ceramic, porcelain, marble, brick, stone and masonry, hard metals like cast iron, and fiberglass.
  • --- (2) Bi-metal steel blade (wood/plastic/soft metal) - Best for cutting: hard/soft wood, demolition (nail-embedded wood), sheet metal and pipe cutting, plastic, drywall.
  • (1) 3-1/2" Bi-metal half moon blade (wood/plastic/soft metal) - Best for cutting: soft metal, wood, wood laminates, softer plastics, drywall, carpet,.
  • --- (2) 3-1/2" HCS SK5 steel half moon saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet, (5) HCS SK5 steel saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet.
  • (2) HCS sk5 steel E-Cut saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet. Bulk Packaging [No Clamshell Packaging].
Check Stock

Drywall Lift Panel 11' Lift Drywall Panel Hoist Jack Lifter Jack Rolling Caster Wheel Sheetrock Drywall Lift Construction Tools (11FT)

  • 【Easy to assemble and disassemble】The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools..
  • 【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them..
  • 【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism..
  • 【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs..
  • 【Quiet working】The drywall lift is almost no noisy and The Panel Lift is almost no squeeking soud when The Panel Hoist raise and lower the hoist..
Check Stock

#8 Self Drilling Drywall Plastic Anchors Screws for Drywall - Equipped with 25 1.5 Inch Wall Anchors and 25 Stainless Steelscrews, Hanging 75 Pounds No Pre Drill Hole Preparation Required

  • 304 STAINLESS STEEL SCREWS: Our Drywall Anchors Are Equipped With Screws Made Of 304 Stainless Steel That Are Stronger Than Ordinary Screws Against Rust, So You Won'T Be Upset By The Rusty And Weak Screws Of The Wall Anchors..
  • ANCHORS MADE OF FIBERGLASS REINFORCED NYLON:Although most gypsum board anchors are made of ordinary plastic, our anchors use tough glass fiber reinforced nylon. Using our drywall screw kits, the cracked style is designed so that you will not feel frustrated by breaking or peeling off when installing the fasteners..
  • EASY TO USE: Our wall screw retainers are very easy to use. They are self-tapping screws and do not require pre-drilled or pilot holes. Since you only need a drill bit, you can install as many products as you like on plasterboard and drywall. They are great for hanging bathroom and kitchen accessories, shelves, lights, mirrors, picture frames, curtain rods and small decorative shelves, note that they are not suitable for use in concrete and brick wall.
  • FIRM: Frequent use of drywall anchors, you are always worried that they may be pulled out or fail because they are not strong. With durable reinforced nylon structure and 50 pounds of fixing strength, our anchor points are very strong..
Check Stock

VINGLI 11 FT Drywall Lift Portable Sheetrock Lift Rolling Panel Hoist Jack Lifter Construction Tools with Adjustable Telescopic Arm Lockable Caster Wheel,

  • Get Drywall Effortlessly by One Person--This drywall lift allows one person working alone to install full sheets of drywall in a fraction of the time, which is perfect for DIY and residential use.
  • Adjustable Telescopic Arm--The telescopic arm can be adjusted from 49' to 114', which is ideal for installing 4' x 16' sheets without assistance..
  • Safe for Use--This drywall lift is made of heavy-duty steel and built-in winch with brake, which guarantee safety and sturdiness while heavy lifting and placing of drywall sheets.
  • 150Lbs Load Capacity--This drywall lift can attach to level ceilings, sloped ceilings or side walls with a maximum load of 150 pounds..
  • Move Anywhere You Want--Features 3pcs of 5'' caster lockable wheels for easy rolling and stop..
Check Stock

Fixed TV Mount for Steel Stud, No Stud, Hollow Wall, Wood, Concrete, Brick Universal Bracket for 42 to 75 Inch TV's. Includes No Stud & Steel Stud TV Mount Mounting Anchors

  • METAL STUD WALL MOUNT KIT - It fits most flat TV’s between 42” to 75” weighing up to 132lbs with VESA from 200 x 200mm to 400 x 400mm Screws for SAMSUNG, LG, SONY, TCL, VIZIO, HISENSE,INSIGNIA, PANASONIC, SHARP, and all major brands are included. M8 x 45mm TV mounting Bolts for Samsung TVs.
  • SUITABLE FOR ANY WALL – Yes, that’s right. Unlike other TV mounts on the market, our heavy duty cold rolled steel mount is designed for any wall including drywall with metal studs, wood stud, concrete walls and brick walls too. We’ve just made life so much easier..
  • DESIGNED FOR METAL STUD WALLS – each of our TV wall mounting units come with a metal stud mounting anchors, heavy duty toggle bolts and toggle bolts screws, so you don’t have to make any late night runs to the hardware store..
  • LOW PROFILE– low-profile design securely holds your TV only 1.4" from the wall with stylish appearance.
  • 200lbs DRYWALL ANCHORS INCLUDED: Mounting just drywall without STUD or on STEEL STUDs is possible with the 4 units of 1/4-20 TOGGLER drywall anchors which are included in this TV MOUNT. Easy to us TOGGLE anchors that are rated for 200lbs on 1/2" drywall. NEW DESIGN that Saves installation time compared to most drywall and toggle anchors available..
Check Stock

Platinum Grade Drywall Finishing Set | 10

  • Everything you need to perform a 2 coat finish on drywall flats and corners..
  • Highest quality stainless steel and aluminum constructionDescriptionThis set is an excellent value set of drywall taping tools. The finishing set gives you everything you need to perform a two-coat finish on drywall flats and corners. Platinum Drywall Tools are precision machined out of the highest quality materials at a fraction of the price that other brands charge for the same tools. Includes: 1- Platinum Corner Roller Head 1- Platinum Corner Roller Handle 1- Platinum 10" Flat Box 1- Platinum 12" Flat Box 1- Platinum 8" Angle Box 1- Platinum Angle Box Handle 1- Platinum 3" Angle Head 1- Platinum Angle Head Handle 1- Platinum Loading Pump w/Filler 1- Platinum 42" Flat Box Handle.
Check Stock

Drywall Lift 11' Construction Rolling Caster Wheel Lockable Tool Panel Lift Drywall Panel Hoist Jack Lifter Jack Drywall Lift, Red

  • Allows One Person Working Alone: This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them..
  • Safe And In Good Balance: The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cableof the Panel Hoist..
  • Easy To Assemble And Disassemble: The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio..
  • 150Lbs Load Capacity: This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs..
  • Quiet Working: The drywall lift is almost no noisy and The Panel Lift is almost no squeeking soud when The Panel Hoist raise and lower the hoist..
Check Stock

Goldblatt 2 Piece Drywall Corner Tool Set, 5'' Outside Corner Knife & 3-1/2'' Inside Corner Knife, with Soft Grip Handle - Stainless Steel Sheetrock External Corner Trowel & Internal Corner Trowel

  • ...ss than 90°. The blade has a certain elasticity. After the blade is pressed and the tool reaches 90 degrees, which has achieved a better fit for the corner of the wall. All the blades are designed with rounded corner for smoother concrete and cement plastering work on corners and less sanding work.
  • Outside & Inside Drywall Corner Tool – Drywall corner tool set include one piece 5” X 3-7/8” large external corner trowel and one piece 3-1/2” X 2-3/8” internal corner trowel that will meet your different using requirement, and make your lives on the drywall job easier, more efficient and more profitable.
  • Premium Stainless Steel Blades – Blades are made of premium stainless steel for high strength, mirror finish for rust-resistant corrosion-resistant and easy cleanup, strong and durable. Precise flex for a better finish and faster application rates. This 90-degree corner tool doesn’t just help you accomplish smooth-looking surfaces.
  • Ergonomics Handle – Lightweight full soft comfort grip handle ergonomically designed for all day use with minimal fatigue. All the handles are strongly welded to blades by chrome plated steel connecting rod for long term use. Designed with hanging hole for easily storage. Al....
Check Stock