ReviewsSteel Fastener

ZWILLING manicure set pedicure kit, nail care complete set, cowhide, croco edition, 10 pieces, black

Includes TWIN S nail clipper, sapphire nail file, and slanted tweezer.
Case made of red neat’s leather with snap fastener and contrasting velvet interior.
Tools are matte satin-finished stainless steel.
Attractive case with a red leather exterior with snap fastener, velvet interior.

Check Stock

Concrete Nail Gun, Silencer Shot Nail Grab, Steel Nails Gun, Portable Nail Gun Set, Concrete Nailer With Case, Manual Fastening Tool for Cement Wall

✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
✅ Includes: Concrete T-Nailer | Cardboard box.
✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.

Check Stock

RIMKOLO 107-Piece Bit Socket Set,1/4

DURABLE S2 Material: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
HEAT TREATMENT CR-V: The socket base is made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,and the E-Torx Sockets with manganese phosphate coating are more anti-corrosive and anti-rust than Black oxide coating, extending the service life..
CHAMFERING DESIGN: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
COMPLETE ACCESSORIES: 107PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / extra long Torx / tamper proof Torx/hex / ball end hex SAE & metric bit set. Complete accessories to meet your needs..
EASY TO IDENTIFYWith a storage toolbox, easy to carry. Specifications are clearly printed on the tool box and socket, which is convenient for identification and sorting, saving you time..

Check Stock

GEARWRENCH 11mm 12 Point Ratcheting Combination Wrench - 9111

72 tooth ratcheting box end needs a minimal 5 to move fasteners vs. 30 for standard wrenches.
Off-corner loading design on box end provides better grip and reduces fastener rounding.
Thin head and beam provide greater access in confined work areas.
Size conveniently stamped on both ends of the beam for quick identification.
Manufactured from alloy steel for better strength and longer tool life.
Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
Sleek head design enables access to tight spots where a ratchet will not fit.
Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.

Check Stock

GEARWRENCH Ratcheting Combination Wrench 16mm, 12 Point - 9116D

72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches.
Off-corner loading design on box end provides better grip and reduces fastener rounding.
Thin head and beam provide greater access in confined work areas.
Size conveniently stamped on both ends of the beam for quick identification.
Manufactured from alloy steel for better strength and longer tool life.
Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
Sleek head design enables access to tight spots where a ratchet will not fit.
Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.

Check Stock

Slide-Co 241947 Bed Frame Rail Clamp with 1" Frame, Small, Zinc

Constructed of heavy gauge steel and solid steel bolt fastener.
Clamp and bolt fastener comes finished in a corrosion resistant, zinc plated finish.
Used with 1-1/4 inch x 1-1/4 inch wide bed frame L-angle material.
Hand tightening should be all that is necessary for setting bed frame width, but pliers can be used for tightening with slightly increased torque if frame halves keep spreading easily.

Check Stock

ARROW T50 Stainless Steel Staples Pack Set #508SS1 1/2 12mm and #506SS1 3/8 10mm

The Arrow Fastener 3/8" T50 506SS1 stainless steel staples:3/8 in. crown size, 3/8 in. leg length, includes 1000 staples..
The Arrow Fastener 1/2" T50 508SS1 stainless steel staples:1/2 in. leg length, includes 1000 staples..
Made of heavy duty, corrosion resistant steel,these staples will last you a long time and will hold you a fabric, wiring and anything else secure..
Can be used for light and heavy duty home projucts such as installing window screening, upholstering furniture, attaching insulation and pinning down wire..

Check Stock

MIXPOWER 3/8 Inch Drive Long Hex Bit Socket Set,1/8 Inch to 3/8 Inch, 3mm to 10mm, SAE & Metric, Extra Long Allen Hex Bit Socket Set, CR-V and S2 Steel, 18 Pieces Set

【 S2 alloy steel bit 】Combination of premium S2 alloy steel bit for superior hardness that reduce wear-outs and ensure longevity for lasting service life..
【Premium Materials】Made from premium chrome vanadium steel with mirror finish, provides the greater strength and torque..
【CHAMFERING DESIGN】Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener..
【Set Include】8PC 3/8" Dr. long inch hex bit sockets:1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8.
10PC 3/8" Dr. long metric hex bit sockets: 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm..
【Service Guarantee】All MIXPOWER Tools meet or exceed ANSI performance standards. It comes with 1 year quality guarantee..

Check Stock

DeckWise #7x1-5/8" Self-Tapping Screws for Metal Joists, 410 Stainless Steel T15 Deck Screws Cover 100 Sq. Ft. of Decking (350 Pack)

Specifically designed to replace nails in certain Simpson Strong-Tie stainless-steel connectors and is the only screw approved for that application. The #9 SD SS screws replace 10d nails..
The single-fastener load capacity of the #9 SD SS exceeds the capacity of a 10d common nail..
Tested and approved for use in many of our most popular stainless-steel connectors for both interior and exterior applications..
Ideal for use in connector applications where more control is desired or using a hammer is inconvenient..
1/4" hex head with 0.37"-dia. integrated washer is stamped with the Simpson Strong-Tie "?" sign and the fastener size for easy identification after installation. Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors..

Check Stock

uxcell 1-Inch Drive by 34mm Deep Impact Socket, 6-Point, Cr-V, Metric

【Size】1-inch drive, 34mm 6-point socket, 78mm (3.07-inch) total length..
【CR-V Steel】Made of premium chrome vanadium steel with black phosphate finish protecting against rust and corrosion..
【Radius Corner Design】Reduces wear and increases the torque on fasteners by placing force on fastener walls rather than fastener corners..
【Pin Hole】Individual pinhole base design adds extra security by placing in a locking pin for stability when exerting strong torque motion..
【Size Markings】Large markings for quick socket identification..

Check Stock

Sunex Tools 1874 1/4' Drive Master Fractional and Metric Impact Sockets Set

CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
CHAMFERED OPENING: Quickly aligns fastener to socket..
DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..
MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
SAE: 3/16” to 9/16” and METRIC: 4mm to 15mm.
FULL COMPLEMENT OF EXTENSIONS: Provides access to virtually all recessed fasteners..
UNIVERSAL JOINT: Adapts any socket for use in swivel applications..

Check Stock