ReviewsSteel Jacks

Hi-Lift Jack HL364 36' Hi-Lift Black Cast and Steel Jack

  • The Hi-Lift 36 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components.
  • Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.
  • Two piece handle and socket is durable and reliable.
  • Operation type : Mechanical. Tested and certified to meet applicable requirements of ASME B30.1-2015..
  • Safe use information stickers, including rated load details and operating instructions, affixed to handle.
  • For greater safety, all Hi-Lift jacks are equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.
Check Stock

Red Hound Auto Quick Change Bit 19 mm or 3/4 Inches Impact Driver Hex Socket Magnetic Nut Driver RV Lift Tack Trailer Stabilizer Leveling Scissor Jack Socket

  • works on both 19mm or 3/4" Hex Head Scissor Jack RV Trailer Stabilizers.
  • Reduces time and effort to raise or lower your scissor jacks.
  • The 1/4" Hex drive quick change shank will allow this versatile bit to work in a quick change chuck, or can fit in all 3/8" or 1/2" power drills with....
  • Works with 3/4" hex drive jacks, using power drill torque to raise/lower jacks.
  • Constructed of heavy duty chrome plated carbon steel.
Check Stock

Camco Eaz-Lift Heavy-Duty Scissor Jacks with Drill Adaptor 24 Inch Supports Up to 7,500 lbs Pack of 2 48830

  • RV Stabilizer Scissor Jacks: Effortlessly stabilize pop-ups, trailers, and other high vehicles.
  • these scissor jacks have a certified 7500lb load....
  • Durable Construction: Made of heavy-duty steel for quality and durability.
  • scissor jack for RV is powder coated for maximum rust protection.
  • Adjustable Height: Measures 4-3/8 inches high when fully collapsed and 23-3/4 inches when fully extended.
  • drill adapter allows bolt-on installation....
  • Package Includes: Comes with two RV scissor jacks and one scissor jack socket for the power drill.
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the....
Check Stock

Tripp Lite 16-Port Keystone Blank Patch Panel RJ45, USB, HDMI, Cat5e / Cat6 Rackmount Unshielded 2URM TAA (N062-016-KJ)

  • MANAGES AND ORGANIZES input and output cable connections in your network. Customizable solution for a variety of applications, including Ethernet, voice, audio/video and USB..
  • 16 BLANK CUTOUTS COMPATIBLE WITH ALL TRIPP LITE KEYSTONE JACKS & MORE: The 16 blank cutouts accommodate all Tripp Lite keystone jacks, and most other keystone jacks in the market, including RJ45 Ethernet, HDMI audio/video, voice and USB applications..
  • KEEPS CABLING NEAT, TIDY AND ORGANIZED: Heavy-duty cold-rolled steel construction. Numbered ports for easy connection identification..
  • QUICK, EASY INSTALLATION: Mounts into 1U of standard 19 in. 2-post or wall-mount rack. Includes grounding wire..
Check Stock

Bulldog 500245 Black Universal 6" Trailer Jack Poly Wheel Caster with Pin (1200 lbs. Capacity)

  • For use with Bulldog round tube trailer jacks or wherever a removable caster that fits 2 inch diameter tubing is required.
  • Fits Bulldog trailer jacks rated from 2,000 lbs. to 5,000 lbs..
  • Heavy duty poly wheel with zinc finished, steel swivel mount components.
Check Stock

Jingchengmei 16-Port 1U Hinged Rack Blank Patch Panel for Keystone Jack Cat.6 or Cat.5E, 19\ Rackmount (H1UKS16H, Black)

  • Product Size : Height 1.75" x Width 19" x Depth 0.39 " after assembled, taking 1U Space.
  • Fits for any Standard 19-inch Relay Rack, Cabinet or Wall Bracket..
  • Hinged Side: Hinged Side can be assembled at left or right side according to your own usage.
  • you can open from the holding side, then the panel can be reversible for easy access & maintenance..
  • Accepts All Snap-in Jacks: This 16-port Blank Patch Panel Accepts Almost All Snap-in Jacks,Such as Cat 6 or Cat 5 E. Use Keystone Jacks & Inserts to Configure Your Patch Panel to Accommodate a Variety of Setups..
  • Heavy Design: This Keystone Panel is Made of Cold Rolled Steel with Powder Coating..
  • Each Port Numbered: Each Port is Numbered for convenience..
Check Stock

Preservation Solutions - Wood Juice Quart - Semi Dry Wood Stabilizer

  • Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base.
  • Includes 4 steel jacks and 1 crank handle, Also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!.
  • Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you....
  • Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5".
  • Capacity: 6,000 lbs per jack, bulit by same material as other brand's 7500lbs jacks!.
Check Stock

Ugotfeels Neoprene Cover for Hi-Lift Jack & Other Farm Jacks | Easy to Cover | More Thick& Durable (Black)

  • Fit most trail jacks& lift jacks, say All-Cast Jack, Cast/Steel Jack series..
  • Waterproof, dustproof, UV protected, Soft & durable.
  • To wrap jack tight to prevent rattle noise..
  • Double layer design on main greased part ensure long working life..
  • Zip up from top to bottom - easy to close the cover.
Check Stock

1/2" Scissor Jack Adapter Drill Adapter for Use with 1/2 Inch Drive/Impact Drills/Ratchet or Standard Drive Sockets or 13/16 Inch Lug Wrench/Tire Iron Make Your Scissor Jacks Lifting Easier (1)

  • Updated Designed Scissor Jack Adapter: Bolt Length extended to 45mm. Compares with 40mm bolt, It will fits more scissor jacks..
  • Easily raise, lower and level your scissor jacks faster and more easily than ever. For use with 1/2" impact wrenches, drills or standard drive sockets. Labor saving !.
  • Suitable to most of loop type or double eyelet type scissor jacks in the market..
  • Made of very solid chrome vanadium steel. More Sturdy.
Check Stock

Camco Replacement Scissor Jack Crank Handle | Features a Soft Comfortable Handle | Compatible with 3/4-inch Hex Drive Jacks | 57874

  • Replacement Part: Replacement scissor jack crank handle.
  • Simple to Use: Quickly and easily raise or lower your jacks.
  • Compatibility: Works with ¾-inch hex drive jacks.
  • Features: Soft PVC padded handle provides a comfortable grip.
  • Dimensions: 22 3/8-inches (L) x 5 3/16-inches (W).
  • Durable Construction: Made of heavy-duty, zinc-plated steel.
Check Stock

Generic DC Barrel Jack 5.5x2.1mm 12V Panel Mount for Wall Supplies(pack of 10)

  • Fit most trail jacks and farm jacks, say All-Cast Jack, Cast/Steel Jack series and all Hi-Lift Jack Models..
  • This jack case waterproof, dustproof, UV protected, Soft and durable..
  • To wrap jack tight to prevent rust is produced..
  • Protect double layer design on main greased part ensure long working life..
  • Easy to close the cover - zip up from top to bottom..
Check Stock