ReviewsSteel Plate For Bridge

SereneLife MIG Welder Flux Core Welding Machine with Gas and No Gas, 130A DC 110V 220v IGBT Inverter Welder with Automatic Wire Feed, Welding Gun, Ground Wire, Brush, Mask, Dual Voltage Adapter

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Primacoustic RX7-UF Standard Recoil Stabilizer - 10 Degree Up Fire

  • Improves transient response and imagingTightens up the bass for greater accuracyEliminates resonance and phase anomaliesImproves translation to other audio systems.
  • The Recoil Stabilizer is a loudspeaker platform that combines three basic components: a high-density urethane foam base to isolate the speaker from the shelf, monitor-bridge or stand.
  • The foam effectively decouples the loudspeaker to eliminate vibration-borne resonance that invariably introduces phase anomalies, while the steel plate introduces significant mass to the structure, stabilizing the speaker.
  • The no-slip surface coats the top to ensure the monitor stays firmly in place.
  • By reducing the backward 'recoil' as the speaker coil pushes energy forward, the initial transient no longer suffers lag and the sharpness of the resulting impulse is more defined.
Check Stock

Wilkinson WBBC Bass Bridge Brass Saddles for 4-String Precision Bass/Jazz Bass Chrome

  • Specially designed for 4 string electric bass with a chord distance of 57mm(2.24in), string spacing is 19mm(0.75in), fully adjustable in height....
  • Strings are mounted through the back plate of the bridge with a quick release system to make string changes easier, as well as string through the....
  • Solid steel construction, sturdy and durable, chrome plated, fits for most Jazz style electric bass precision bass or similar 4 string instruments..
  • Before purchasing, please check whether the products are compatible with....
  • Comes with screws and wrench, easy to assemble and adjust the height of saddle, the wrench can regulate the front/rear position and height of the....
Check Stock

Alnicov 6 Strings Saddle Bridge Plate 3 Way Switch Control Plate Neck Pickup Set for Fender Telecaster Electric Guitars Replacement Parts Black

  • This is a beautiful and very well made hardware kit, including a bridge plate, a control plate, and a neck pickup, loaded in a nice box..
  • The bridge plate is thick metal with reliefs, has 6 roller saddles and a single coil pickup. The pickup sounds clean..
  • The control board has a 3-way switch, the volume and tone buttons are with pearl top..
  • Neckline with matching cover sounds transparent..
  • Suitable for Telecaster style electric guitars..
Check Stock

Gotoh 201B-4 Bass Bridge Chrome

  • 4 string vintage style bass bridge for Jazz bass and Precision bass top load upgrade..
  • Four adjustable barrel saddles. Strings mount at the rear of the bridge..
  • String spread is 57mm, Base plate is 80 x 44mm. String space is 19mm..
  • Includes 5pcs screws and 1pc allen wrench, for a full set, ready for use..
  • Metal material, chrome color. A great bridge for your next project, upgrade or as a replacement..
Check Stock

Martin Authentic Acoustic Guitar Strings - Marquis Silked

  • Added soft silk wrap to the ball ends of the authentic acoustic strings to prevent wear and tear on the bridge and Bridge plate.
  • Offer Thread wrapping for bridge protection, corrosion resistance and excellent tuning stability.
Check Stock

Guitars Tailpiece Accessory, Easy Installation Electric Guitar Saddle Bridge Metal Silver 10x8x2cm with Hex Wrench for Instrument

  • Easy Installation: Coming with a hex wrench and three screws, this saddle bridge is very easy to adjust and install..
  • Smart Design: The bottom plate also has a cut out angle for standard long distance single coil pick ups..
  • Saddle Bridge: There is 6 saddle style long tone bridge on the saddle bridge, and the adjustable height of each enables easy tuning..
  • Good Material: Made of high quality material, the saddle bridge has mirror effect, which adds more beauty to your acoustic guitar..
  • Convenient Use； The saddle bridge has string holes for conventional threading on the back of it, which simplifies the threading as well..
Check Stock

Metallor Tune-O-Matic Electric Guitar Bridge for SG Les Paul LP Style Guitar Parts Replacement Chrome.

  • Brand new Tune-O-Matic style adjustable guitar bridge in geniune chrome plate. Perfect replacement bridge for your LP SG or just about any guitar that has this setup..
  • The bridge mounting posts are on 74mm centre to centre measurements. The bushes, which force fit into the guitar body, need  a 10mm diameter hole to fit into. Please see the diagram for other dimensions..
  • Typically found on Les Paul / SG style guitars, this bridge has an overall string span of 52mm with the six individual saddles profiled for a slightly curved fingerboard. Each saddle is adjustable for intonation..
  • The bridge is supplied with splined bushing to fit into the guitar body that hold the 6.3mm diamter adjustable posts that fit either end of the bridge..
Check Stock

Hipshot 405200B 3-String Retainer/String Guide for Bass - BLACK with Screws

  • ... 2 types, 4 pieces of guitar strap buttons with 2 types, a tweezers and a plastic organizer box, which is easy to carry.
  • 【9 Different Types of Guitar Screw】9 Different types of screw, this box can basically meet the need for electric guitars repair.Tuner Screws/Guitar Pickguard Screws/Selector Switch Screws/Tele Bridge Screws/Neck Plate Screws/Pickup Ring Screws/Pickup Ring Screws/Strat Bridge Screws/ (Strat/Tele Pickup Screws with Spring)/Humbucker Pickup Screws with Springs,Screws and springs can make it easy for people to deal with guitar repairing and installing.
  • 【Perfect Hardware Parts DIY Set】The guitar screw kit can help complete the most common guitar repairs and adjustments.Perfect replacement parts, suitable for Luthier, string instruments users. They can repair and adjust their favorite instruments to maintain the instrument in good playing condition.
  • 【Guitar strap button& Elbow tweezers】: 2 types guitar strap buttons,easy to install, just attach it to your strap, and screw securely into locking position, make your DIY project work more efficient. Tweezers can make it easier for you to pick up the screw, easy to install and convenient to use.
  • 【Stainless Steel Materials Screws】Electric guitar Sews made of stainless steel materia....
Check Stock

STEELWATER GUN SAFES New and Improved E.M.P Proof Steelwater Extreme Duty 22 Long Gun Fire Protection for 120 Minutes AMHD593024-EMP.

  • ... vulnerable areas of the linkages.--9 Gauge steel with an added 1/4 inch steel plate on the entire door. H 59 x W 30 x D 24 (add 3" for handle).
  • PLEASE READ BEFORE PURCHASING: Undeliverable to New York with zip codes beginning in (100-104) & (110-119), some remote areas such as islands, areas accessible only by toll bridge or ferry service, union states, etc. Please contact us to verify. THIS PRODUCT IS SHIPPED BY TRACTOR TRAILER. Please read over shipping details to prevent delivery issues. Contact us for questions and/or other delivery options..
  • SEE MORE IN-DEPTH DETAILS ON THIS PAGE BELOW ADVERTISEMENTS.
Check Stock

Dilwe 9-Speed MTB Chain, 350KGF, Full Electroplating, with Velcro Fastener, Double X-Bridge Design, Colorful Bicycle Chain

  • Hot Quenching and Hardening Treatment: Adopt hot quenching and hardening treatment, high wear resistance, can bear high tread force, the chain speed is flexible, fast, no chain disconnection, and no noise..
  • Waist Guide Angle Design: The waist adopts the guide angle design, the gear tip and the chain piece can quickly bite, do not have to worry about the car in the violent impact of the chain, stability and safety greatly improved..
  • Full Electroplating Treatment: High quality steel with full electroplating treatment and strong chain axle chimerism, can withstand strong of chain and tensile and torsional strength, sediment is easier to eliminate, effectively reduce damage..
  • Double X Bridge Design: Double X bridge design, make the upper and lower chain smoother, the same bridge and chamfer design on both sides of the chain plate eliminates the installation of directional problems, increase installation convenience..
  • Strong Tensile Force: The strong tensile force of rounded rivet in the corner enhances the joint force of the axle, which can get more than 350KGF, and the chain is safe and stable. At the same time, the unique chamfer design can quickly change the speed..
Check Stock