ReviewsSteel Railing

Muzata 6'6' Handrail Black Stainless Steel Cable Railing Deck Stair Indoor Outdoor Rectangle Staircase Handrail Fit Muzata PT1 Flat Top Wood Metal Post BlackCool System HT10 BP4, HR2 HR0

  • Wide Applications – Muzata rectangle stainless steel handrails can be used with metal posts on the deck and cable railing or stair railing systems. It is widely used at home and commercial areas. Recommended to work with Muzata black stainless steel posts PS01 PS02. In addition, it can work as a glass-mounted handrail with Muzata GA03 adjustable glass bracket.
  • Black Cool & High Quality- The black powder-coated handrail has an elegant look to match your modern decor. Muzata black rectangle handrail is made of quality stainless steel. Heavy duty handrail with 1.5mm thickness for payload above 200 lbs, designed according to code compliance. Excellent waterproof and corrosion resistance, durable for long-term applications, but not for seaside or humid area uses.
  • Related Accessories – Please note that this item ONLY contains 1pack rectangular black handrail. Please search the model number below for accessories to customize your railing project. There are straight connectors HA01, corner connectors HA02, adjustable corner connector HA23, adjustable angle connector HA24, wall mount base end bracket HA33, and POM end cap HA12.
  • BlackCool System – We pre-designed a BlackCool cable railing system to help you get a fully customized project. The system include....
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Muzata 30 90 Degree Angle Drill Guide Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight and Angled Hole Lag Screw for Wood Post CT09,CT1

  • Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 30 degree angled holes for the wood railing post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4" drill fit most of 1/8" cable railings lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable - The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag....
Check Stock

Muzata 200pack Aluminum Crimping Loop Sleeve for Hanging and Securing 5/32inch(4mm) 1/8\ 1/16\ Wire Rope Single Barrel Ferrule CableLine End CB39

  • ...re loops when anchoring cable by compressing with vise, pliers, compression tool.
  • These wire rope crimp Loop sleeve are made of aluminum alloy, which provides corrosion resistance and attractive appearance and durability to these wire rope sleeves, They are great to work on 5/32" stainless steel cable array for deck railing, properly crimped it will support 200lb load. These wire rope cable sleeves are the most economical solution for dog Leashes, Clothes Lines, Fishing Wire, Deck Railing, Stair Railing, and any other projects require loop ends on wire ropes..
  • Specifically designed for 5/32 In (4mm) Stainless steel cable wire rope, simply slide the cable into the wire rope sleeve, then pass the end of the rope back through the remaining ferrule to form an appropriately sized loop. After using a mechanical or hydraulic swaging tool to obtain the full holding power of stainless steel oval sleeves. It really depends on how good your swaging tool is. Please search B06XD4DY22 to purchase the recommended hand crimping tool..
  • CableGenie system - This product belongs to the wood CableGenie cable railing system, in which we have planned everything you need for a cable railing project. It includes: Cable railing kits (CR73 or CB16).
Check Stock

Muzata 20Pack 10 30 35 Degree Angle Adjustable Protector Sleeve for Wood Post Stair Railing for 1/8\ Wire Rope Cable Railing T316 Stainless Steel CR68,CP1

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 20packs angle sleeves, 20packs adhesive sleeves, 40pcs adhesives, 1pc drill bit(9/32")..
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pr....
Check Stock

BLIKA 65 Pack Stainless Steel Protector Sleeves for 1/8' 5/32' or 3/16' Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Cable Railing Protector Sleeves

  • Applications: This Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • Material: Stainless Steel T316 Marine Grade,High tensile strength and anti-fatigue strength Weatherproof..
  • Size: Suitable for 1/8" 5/32" or 3/16" cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.48 inch, Required Hole Diameter = 0.258 inch..
  • Easy to Install: This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Cable railing system requires hardly any maintenance..
  • Package Includes: 65 Pcs Stainless Steel Protector Sleeves and A Free Drill Bit..
Check Stock

BLIKA 120 Pack Stainless Steel Protector Sleeves for 1/8' Wire Rope Cable Railing, Cable Railing Protector Sleeves, Deck Cable Railing Kits

  • Applications: This Stainless Steel Protector Sleeves for 1/8" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • Material: Made of Stainless Steel T316 Marine Grade, High tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance..
  • Size: Suitable for 1/8" cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.474 inch, Required Hole Diameter = 0.251 inch..
  • Feature: This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • Package List: 120 Pcs 1/8 inch Stainless Steel Protector Sleeves and A Free Drill Bit..
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit（Single lag screw） made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence…；.
  • This cable railing hardware applies to standard 1/8" inch cable（OD）， Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation；The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage：high quality、easy to install and looks clean..
Check Stock

Neitra 30 45 90 Angled Drill Guide Jig for Cable Railing Lag Screw Kit Wood Post, Drilling Degree Angle and Straight Holes, Durable All Metal Drill Jig for Railing Deck Stair Handrail

  • ACCURATE THREE ANGLES: The Neitra cable railing drill guide jig dowel allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
  • FOUR SIZES GUIDE HOLES: With four sizes of drilling guide holes for each angle, 3/8″(9.52mm), 5/16″(7.93mm), 1/4″(6.35) mm), 3/16″(4.76mm), each compatible with most cable railing cable protector sleeves and lag screws. An efficient and compact angled drill guide that is easy to carry..
  • ALL HARD METAL MATERIAL: The drill jig for angled holes is set with ultra-hard chrome-plated steel sleeves, which is wear-resistant, sturdy, and durable, no need to worry about being worn when drilling, and the drilling accuracy is error-free as always. The main body of the railing drill guide is made of high quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, clear markings..
  • EASY OPERATION: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while ....
Check Stock

Drill Jig for Angled Holes-Portable Aluminum Drill Guide for Straight Holes 30 45 90 Degrees with 4 Sizes Guide Holes Durable Drilling Jig for Cable Railing Deck Stair Handrail

  • Multiple Sizes: The drill jig for straight holes has four sizes for each drilling angle, which are 3/8”(9.52mm), 5/16”(7.93mm), 1/4”(6.35) mm), 3/ 16"(4.76mm), compatible with most cable railing lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling..
  • Accurate Three Angles: The drill jig for angled holes allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
  • Hard Metal Material: The drill guide for straight holes is set with ultra-hard chrome-plated steel sleeves, which are wear-resistant, sturdy, and durable, no need to worry about being worn when drilling. The main body of the railing drill guide is made of high-quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, and clear markings..
  • Scope of Application: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while drilling, and al....
Check Stock