ReviewsSteel Screw Bushings

uxcell Sleeve Bearings 5mmx8mmx10mm Chrome Steel Oilless Bushing 6pcs

  • Size - Bore Diameter: 5mm, Outer Diameter: 8mm, Length: 10mm.
  • Material - Chrome steel, smooth surface, high hardness, high load capacity, wear-resistant.
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Steel bushings are suitable for high load and high-speed applications. Sleeve bearings are used in a wide variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

Prime-Line K 5131 White Storm Door Hinge Pin Kit (3-Pack)

  • Used as replacement door hinge pin kits for Croft storm doors and a variety of other storm door manufacturers.
  • Steel spring and nylon pins and bushings.
  • Kit contains 3 springs, 6 pins and 6 bushings.
  • Easy to install in less than 30 minutes with a few simple tools.
Check Stock

ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm).
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

VMS RACING FRONT and Articulated Stainless Steel REAR LOWERING KIT Bolts and Bushings Compatible with Chevy Chevrolet Corvette C5 97-04 1997-2004 Complete Set

  • [ IMPORTANT ] VMS RACING Brand (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • VMS Racing 14-piece Kit includes PREMIUM QUALITY, Grade-8 Bolts, Heavy-Duty Polyurethane Bushings, heavy-duty washers and Nylock nuts for the REAR. The FRONT is made of 100% CNC-machined STAINLESS STEEL with DELRIN BUSHINGS, WRENCH FLATS and ARTICULATING BALL STUD FOOT PADS for perfect alignment and smooth suspension travel..
  • Designed to lower your Corvette C5 up to 1.0 inch in the REAR and up to 1.5 inches in the FRONT. This is a DIRECT FIT. NO MODIFICATION to the STOCK COMPONENTS is required..
  • This kit has all you need to lower your front and rear end suspension on your Corvette C5. YOU NEED TO REPLACE THE BUSHINGS TO DO THIS JOB CORRECTLY. This set includes FOUR BRAND NEW POLYURETHANE BUSHINGS. The factory bushings on your C5 are close to 20-years old, DRY-ROTTED and NO LONGER SERVICEABLE. Do not buy any kit that does not include new bushings because you will end up having to source them elsewhere..
  • Compatible with Corvette C5 model vehicles 97 98 99 00 01 02 03 04 1997 1998 1999 2000 2001 2002 2003 2004 (does NOT fit F45, Selective Real-Time Dampening equipped Corvettes)..
Check Stock

Campbell 3002K 8\ Double Regular Wood Shell Block with K Screw Pin Anchor Shackle, 3800 lbs Load Capacity, 1\ Rope, 4-3/4\ Sheave

  • Available with bronze self-lubricating bushings.
Check Stock

Campbell 3001K 8\ Single Regular Wood Shell Block with K Screw Pin Anchor Shackle, 2800 lbs Load Capacity, 1\ Rope, 4-3/4\ Sheave

  • Available with bronze self-lubricating bushings.
Check Stock

Campbell 3002K 5\ Double Regular Wood Shell Block with K Screw Pin Anchor Shackle, 1800 lbs Load Capacity, 5/8\ Rope, 1-3/4\ Sheave

  • Available with bronze self-lubricating bushings.
Check Stock

Campbell 3001K 4\ Single Regular Wood Shell Block with K Screw Pin Anchor Shackle, 1000 lbs Load Capacity, 1/2\ Rope, 2-1/4\ Sheave

  • Available with bronze self-lubricating bushings.
Check Stock

Campbell 3002K 4\ Double Regular Wood Shell Block with K Screw Pin Anchor Shackle, 1400 lbs Load Capacity, 1/2\ Rope, 2-1/4\ Sheave

  • Available with bronze self-lubricating bushings.
Check Stock

Campbell 3001K 5\ Single Regular Wood Shell Block with K Screw Pin Anchor Shackle, 1200 lbs Load Capacity, 5/8\ Rope, 1-3/4\ Sheave

  • Available with bronze self-lubricating bushings.
Check Stock

Fishing Line Spooler Portable Fishing Spooling Station Winder System Fishing Reel Spool Line Winder for Fishing Reels and Bobbin (Black, 26 12cm)

  • Lightweight body design: More convenient to carry. Can be stored in your truck, tackle box and bag..
  • Top screw: Tighten it to stabilize the rotor and loosen it to let the rotor spin..
  • Middle knob: Adjust the middle knob according to the width of your spool to get the proper tension..
  • Bushings: Two small extra bushings for different diameter line spools..
  • Wide application: This line winder can be installed on the fishing rod directly to spool the line. Applicable to all kinds of fishing reels and bobbin types..
Check Stock