ReviewsSteel Shank

0.27 Caliber Green Shot Strip Loads, Power Fasteners Actuated Powder Loads (100-Count)

Washer pins - powder fastener actuated fastening system, Increases bearing surface against the material to be fastened..
Shank diameter = .14Shank diameter = .145.
Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.

【Production process upgrade】The WENORA Drill Wire Brushes are made of curled, untempered 0.010" carbon steel, upgraded from 60A carbon steel to 72A carbon steel, and upgraded in number and thickness (1-1.5 times) they are securely fastened to a securely designed cup-shaped metal holder that will not lose or bend during intense use..
【Stronger 1/4” Hex Shank】1/4" (6.35mm) hex shank has better stability and is stronger than the regular round shank (6mm) and will not come off as easily as the round shank.Wire brush drill set can withstand the high speed of the 4500RMP..
【More Durable Wire Brush for Drill】The standard 1/4 hex shank is compatible with most drill tools on the market,including a regular power drill as well as a pneumatic air drill, etc.Long-term use of the cup brush will not be asymmetrical and distorted..
【Wide Application】The WENORA drill wire brush set for removing rust, finishing weld seams, polishing wood, and other-duty surface treatment of metals.It can also be used for surface paint peeling and grinding.Very high practicality in the field of industrial DIY..

A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..

4 Adjustable Hole Sites: Hole Spacing: 2 in / 5 cm. The hitch-mounted ripper has multiple depth Settings, adjustable for different operating depths, adding two more holes than most similar products. In addition, the box scraper shank is equipped with a shear bolt to protect the hitch and leg..
Carbon Steel Material: The box blade for the tractor is made of high carbon steel with high strength and resistance to deformation. The spray paint coating on its surface insulates metal from direct contact with air and effectively prevents rust and corrosion..
Complete Accessories: We come with an additional replaceable plow tip and mounting pin. The ripper shank has full accessories: 18" length adjustable shank, two ripper teeth, two mounting hooks, shear bolts..
Effortless Installation: In just three steps, the box blade shank teeth can be installed by hand. Firstly, install the shear bolt.
Versatile Applications: Ripper shank for box blade is widely used, compatible with most ATV/UTV and 2-inch receivers, and recommended for CAT 0 and CAT 1 tractors..

Boots for hazardous materials handling. Exceeds CSA standards for Di-Electric footwear. Steel toe, steel shank and steel midsole for complete protection..
NFPA 1991, 2016 edition compliant ASTM F2413-18, CAN/CSA Z195-10.
Specially formulated PVC allow protects you from some of the worst chemicals arounds while exceeding CSA standards for Di-Electric footwear.
Steel toe, steel midsole and steel shank Ultragrip Sipe outsole provides superior, slip resistance and protection.
Certified by S. E. I. to meet the requirements of NFPA 1991 Standard on Vapor-protective ensembles for Hazardous materials emergencies, Flash Fire certified.

Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..

Size: 42.00mm, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/8, Overall Length: 17-1/8, Shank Size: 5MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.

Size: 3/4, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 5-7/8, Overall Length: 9-3/4, Shank Size: 2MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.

This steel forstner bit has a 2" cutting diameter and a 3/8" shank compatible with all standard drill and drill press chucks..
Drill clean and accurate holes in solid wood, plywood and MDF.
Constructed from high-speed-steel for quality and longevity.
The 3/8" shank is compatible with all standard drill and drill press chucks.
Hardened steel constructions for increased rigidity.

This steel forstner bit has a 1" cutting diameter and a 3/8" shank compatible with all standard drill and drill press chucks..
Drill clean and accurate holes in solid wood, plywood and MDF.
Constructed from high-speed-steel for quality and longevity.
The 3/8" shank is compatible with all standard drill and drill press chucks.
Hardened steel constructions for increased rigidity.

25.4 mm shank holding all ER32 collets (Clamping range up to 20mm).
Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
C1 ER32 Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
Widely used in boring, milling, drilling, tapping, grinding and other processing.