ReviewsSteel Sheet Processing Machine

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.

Check Stock

Machine Tap 4-40 UNC Thread Pitch 3 Flutes High Speed Steel Thread Forming Pointed Tap Right Hand Uncoated Bright Finish Round Shank with Square End Plug Chamfer HSS Machine Screw Plug Tap

IMPORTED TECHNOLOGY: Imported High Precision Grinder, The Whole Is Ground And Formed at One Time, The Concentricity Is High, The Rigidity of The Tap Is Increased, and It Is Not Easy To Break..
SELECTED MATERIAL: Overall HSS Imported Steel, Combined with Abrasion Resistance and Hardness, a Wide Range of Processing, One Piece Worth Multiple Pieces..
OPTIMIZED DESIGN: Special Heat Treatment, More Durable, Optimized Handle For Easy Clamping, Convenient Processing And Use, And Ensure The Long-Lasting Stability of The Equipment..
APPLICABLE SCENARIOS: Drilling Machine/Tapping Machine/CNC Machining Center/Automatic Lathe/Milling Machine, Etc..
APPLICABLE MATERIALS: Stainless Steel/Cast Iron/Copper/Alloy Steel/Die Steel/A4 Steel And other Metals..

Check Stock

SNUSIM 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping Metric Thread HSS 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

HIGH QUALITYH - These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
6 STEEL DRILLS - suitable for drilling wood, plastic, fine copper, aluminum and other soft metals (5-6 mm), not for hard materials (eg steel sheet).
SUITABLE - Using for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
SELF-CENTERING POINT - do not need assistant center drilling or center punching.Anti-wear: The back of the cone over the faucet to prevent excessive drilling caused by thread damage.
MORE EFFICIENT - Drilling and tapping in one, one-step processing.Greatly save processing steps and time costs, improve working efficiency.

Check Stock

Dent Removal Rods Set Paintless Dent Repair Tools for Car Dent Remover Puller Hail Damage Repair Kit - 10PCs

REPAIR RANGE WIDELY: Suitable for the sheet metal processing of automobile, refrigerator, washing machine and etc. Can be repaired widely but completely paintless dent removal..
EASY TO OPERATE: Labor DIY can removal the dent, suitable for any person to operate for easy and simple. Repair the dent directly Baking-varnish-free dent repair, which will no damage the paint but faster..
SUPERIOR QUALITY: Paintless Dent Repair Tools are made from several types of Stainless steel with durable and soild. Tempered high carbon Stainless steels and standard stainless steel are used depending on the design of a particular tool..
SAVE MONEY AND ENERGY: Most of the dents can be removed within half hour by these tools, and you can repair be yourself in any free time rather the pay a expensive fee for car repair shop..
SATISFACTION GUARANTEE: If you're not 100% satisfied with this Paintless Dent Repair Tools, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1-yaer’s warranty..

Check Stock

Schwer Highest Level Cut Resistant Stainless Steel Metal Mesh Chainmail Glove for Meat Cutting Butcher Glove（XXL）

【Adjustable Wrist Clasp】- The stainless steel mesh clasp is convenient, and you can adjust it for the right fit. Compared with mesh gloves with fabric cuffs, a stainless steel mesh clasp is easier to clean. Clean: Metal mesh gloves should be cleaned daily, particularly in food processing operations. A water temperature of 122° F (50° C) is recommended whether gloves are manually or machine washed..
【Multi Purpose】- Schwer mesh gloves are the premier choice for food processing, restaurant, and food service applications such as meat, fish, and poultry processing, slicing, deboning, shucking, mandoline and slicing. In addition, they are also perfect for industrial product processing such as plastic, leather, wood, glass, paper, and clothes processing..

Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
6:Self-centering point, do not need assistant center drilling or center punching..

Check Stock

Qiilu Pull Hammer Heavy Pneumatic Sag Repair Pull Hammer Car Body Dent Repair Suction Cup Slide Tool

【PROTECTS THE ORIGINAL PAINT】:Paintless Dent Repair Kit Pulls Dents Out Without Harming The Original Paint Which Gives The Panel A Higher And Longer Protection With Its Special Coating..
【PREMIUM MATERIALS】:This slide hammer puller is made of galvanized steel materials, more tough is not easy to break,it is corrosion and oxidation resistance and will not hurt the car body, fits to more different dents..
【PULL OUT DEEP & BIG DENTS EASILY 】:The Professional Air Dent Puller Produces Much Stronger Power Than An Adhesion One. Aims At Severe Dents Instead Of Small Pits..
【WIDE APPLICATIONS】slide hammer puller is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine..
【DURABLE】:It is durable for years of use, our sag repair kit can help you repair your cars by yourself for many times..

Check Stock

WHDZ Rods Auto Body Dent Repair Hail Damage Removal Tools Dent Hammer for Door Dings Hail Repair and Dent Removal (6 Pieces)

...n is thinner than other ejector pins and is suitable for small dents. And it can withstand a limited weight.If you need to repair large dents, please choose a large ejector set. For example, the A and B models of the ejector set..
【Can Be Widey Use】: Our Paintless Dent Repair Tool is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine Body etc.

Check Stock

6061 T6 Aluminium Metal Sheet 12 x 12 x 1/8 Inch Flat Plain Plate Panel Aluminum Sheet Plate Finely Polished and Deburred

【6061-T6 Aluminum Sheet】12”（L）x12”(W)x 1/8” (thick).
【Overview of 6061】6061 has excellent processing performance, excellent welding and electroplating characteristics, good corrosion resistance, high toughness and no deformation after processing.
【Cutting Flat】professional cutting machine cutting, saw smooth smooth, no burrs on the edge. The normal tolerance is 1-3mm.
【Inside & Out】The surface is smooth and flatness is high, the naked eye can not see the inside of the factory through a variety of instruments strictly tested.
【Widely Used】6061 used in decoration, packaging, construction, transportation, electronics, aerospace,and other industries.

Check Stock

WHDZ Paintless dent Repair Rod 76PCS Paintless Dent Repair Tool Kit Slide Hammer Dent Lifter Bridge Puller Set Light Board Glue Puller Tabs for Car Dent Removal

【Paintless Dent Removal Tools】: Newest professional Stainless Steel Whale Tails Paintless Dent Repair rods suit for professional technicians to repair dents hail damage and door dings, there are two kinds of bags, with logo and no logo, random delivery.
【Effective & Safe】: Efficient and safe to pop out dents,repair door ding and hail damages on the metal surface,such as auto,motorcycle,refrigerator,washing machine etc.No damage at the original paint..
【Good Quality】: Main materials:Stainless steel,rubber & durable plastic.The dent pullers which are designed with ergonomic can save labor and easy to lift,very sturdy and have a long lifetime.all items which will touch the auto are made of the rubber or plastic.they will don't hurt the auto surface..
【Save Money & Time】: Instead of spending hundreds of money in body shops ,our Paintless Dent Repair tool kit can help you repair your cars by yourself for many times,so it can save a lot of money for you compared with the auto body shops.
【Widely use】: Our Paintless Dent Repair Tool is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine Body etc. Products are shipped from the United States.Quickly and Easily!.

Check Stock

12 Pcs 304 Stainless Steel Strips Sheet Shim Metal Shim Stock Gap Filler Trim Strip for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 1x 6 Inch

Sturdy Material: our shim sheet is made of 304 stainless steel material, rust and corrosion resistant, sturdy and strong, not easy to break or fade, so you can buy and use it with confidence.
Convenient in Daily Life: these stainless steel strips are bendable that they allow you to machine or cut into various parts, like washers, metal shims, spacers and so on.
Also, you can DIY crafts according to your imagination.
Size Information: these stainless steel shims measure about 152.4 x 25.4 mm/ 6 x 1 inches, featuring various kinds of thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
Ample Quantity to Meet Your Demand: you will receive 12 pieces of stainless steel sheets in total, which are enough to satisfy your various uses and replacements, 6 different thickness, 2 for each thickness.
Applicable Occasions: these stainless steel metal strips can be widely applied for precision machinery, electronic equipment, processing equipment, mechanical parts, stamping parts, hardware manufacturing and so on.

Check Stock