ReviewsSteel Structure Coil

Diamond Audio MP694 6 X 9 PRO Full-Range Co-Ax Horn Speaker

  • Ferrite Strontium High Temp Magnet structure.
  • 1.5” 4 Ohm – Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
  • 1.0” 8 Ohm – Single Layer High Temp Voice Coil for Tweeter.
  • Advanced Voice Coil Heat Sink Design for Better Heat Dissipation.
Check Stock

3.75'' Titanium Horn Tweeter (Pair) - Aluminum Bullet Diamond Chrome Cutting Finish w/ 300 Watt Peak 20 oz Magnet Structure 2kHz - 25kHz Frequency Response 4 Ohm & 1\ Kapton Voice Coil - Pyle PDBT18

  • 2kHz - 25kHz FREQUENCY RESPONSE: Pyle, 3.75'' aluminum bullet titanium horn tweeter has a 20 oz magnet structure, ferrofluid enhanced voice coil and frequency response. This car speaker is pack with exceptional 99dB (1w/1m) decibel sensitivity.
  • 1'' KAPTON VOICE COIL: Pyle car sound speaker system is capable of 1'' high-temperature kapton voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • 150W RMS AND 300W PEAK: This car speaker can provide up to 150 watts RMS or 300 watts peak power because it is 20 oz magnet structure. A pair of round 3.75'' 300 watt tweeters - carrying both the high and low end for a fuller range sound.
  • CHROME CUTTING FINISH: This car speaker super tweeter is diamond chrome cutting finish. The tweeter measures 3.75'' in overall diameter in a mounting depth at 2''. The product includes mylar crossover capacitor.
  • LOUD AND CLEAR: Pyle car speaker super tweeter were carefully combined to reproduce sound clearly with outstanding responsiveness. It features solid construction and accurate power handling ratings.
  • 3.75 Aluminum horn with 1 super bullet tweeter.
Check Stock

BLAUPUNKT Blaupunkt GTX691 Car Speaker 6 x 9 4-Way Coaxial Speaker Pair 700Watts

  • Ferrite Magnet Structure. High Quality Steel Basket.
  • 1" Aluminum Voice Coil. Mylar Dome Tweeter.
Check Stock

Car Vehicle Subwoofer Audio Speaker - 12 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 1200W Power, for Vehicle Stereo Sound System - Pyle PL1290BL

  • 1200 WATT POWER: This 12-inch car subwoofer has a power of 600 Watt RMS to 1200 Watt peak that will produce high sound resonance. It also has silver-plated speaker terminals that will maximize sound quality while minimizing noise and distortion.
  • 90 OZ MAGNET STRUCTURE: Built with 90 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 85dB to resonate perfect clarity.
  • 2.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 2.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED STEEL BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated steel basket.
  • 7.12” MOUNTING DEPTH: Easy to install w/ 7.12" mounting depth & 12.20" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
Check Stock

2 x BXW-124 4800 Watt 12' Subwoofer 4+4 Ohm DVC Pro Car Audio Bass

  • Max Power: 2400W Per Woofer RMS Power: 1200W Per Woofer.
  • Impedance: 4+4 Ohm Dual Voice Coil Voice Coil: 2.00" 4 Layer Voice Coil.
  • 87.5dB EfficiencyOversaturated motor structure for increased magnetic strength 8mm top plate & vented t-yoke improves low-frequency dynamics.
  • Nickel-plated spring-loaded compression wire terminals High-temperature tolerance adhesives resist thermal failure.
  • poly-cotton suspension dampens violent accelerations stitched voice coil leads to prevent potential damage.
Check Stock

Lanzar 12in Car Subwoofer Speaker - Black Non-Pressed Paper Cone, Stamped Steel Basket, 4 Ohm Impedance, 1000 Watt Power and Rubber Suspension for Vehicle Audio Stereo Sound System - MAX12

  • 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked magnet structure, golden input terminals and 4 Ohm impedance.
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 12.09".
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2” 4 layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 91.9dB and a special designed rubber magnet boot.
  • 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

Pyle PDS772 2.84-Inch Titanium Horn Driver 8 Ohm 13/8-Inch x 18 TPI

  • 300 Watts RMS / 600 Watts Peak Power Handling - 50 oz. Magnet Structure.
  • Midrange / Tweeter Compression Driver - 2.84'' (72.2mm) Flat Aluminum Voice Coil - Titanium Diaphram.
  • Sensitivity (1w/1m): 107dB SPL - Frequency Response: 500Hz ~ 18kHz.
  • Midrange/Tweeter Compression Horn Driver.
  • Titanium Diaphragm, 2 Flat Aluminum Voice Coil.
Check Stock

304 Stainless Steel Chain，Sunxer 9.84ft Heavy Duty Coil Chain Safety Chain Metal Chain ，Chain Link for Transport Tie Down Binder Chain Towing Logging Agriculture and Guard Rails

  • Ultimate Durability：Stainless steel chain made of high quality 304 stainless steel. The surface is polished to keep a bright silver color all the time, which is very beautiful. And even in harsh environments,the chain link won't rust and damage..
  • Quality Throughout：Uses the advanced in the midle of the welding process,avoid mechanical partsBearing larger.Can withstand 77.16 lbs(35kg)，Different specifications have different load-bearing capacity..
  • Clear Structure, good use：The stainless steel coil chain is widely used in daily life.You can use it with hook, quick carabiner clip ,swivel buckle, d-shape shackle or expansion screw with ring. Or can tie two/three chain link together by quick link. These metal chains can be widely used for hanging clothes, plant baskets, swings, artwork, anti-theft chains, pet chains, binding, fixing and towing heavy objects and so on.
  • Superior Security: Sunxer stainless steel coil chain's superior performance allows you to stop worrying about buying a chain that breaks or rusts easily, and you can use it all the time. At the same time, our satisfactory service can address your concerns..
Check Stock

304 Stainless Steel Chain，Sunxer 3.28ft Heavy Duty Coil Chain Safety Chain Metal Chain ，Chain Link for Transport Tie Down Binder Chain Towing Logging Agriculture and Guard Rails

  • Ultimate Durability：Stainless steel chain made of high quality 304 stainless steel. The surface is polished to keep a bright silver color all the time, which is very beautiful. And even in harsh environments,the chain link won't rust and damage..
  • Quality Throughout：Uses the advanced in the midle of the welding process,avoid mechanical partsBearing larger.Can withstand 440.92 lbs (200kg)，Different specifications have different load-bearing capacity..
  • Clear Structure, good use：The stainless steel coil chain is widely used in daily life.You can use it with hook, quick carabiner clip ,swivel buckle, d-shape shackle or expansion screw with ring. Or can tie two/three chain link together by quick link. These metal chains can be widely used for hanging clothes, plant baskets, swings, artwork, anti-theft chains, pet chains, binding, fixing and towing heavy objects and so on.
  • Superior Security: Sunxer stainless steel coil chain's superior performance allows you to stop worrying about buying a chain that breaks or rusts easily, and you can use it all the time. At the same time, our satisfactory service can address your concerns..
Check Stock

Lanzar 12in Car Subwoofer Speaker - Black Non-Pressed Paper Cone, Stamped Steel Basket, Dual 4 Ohm Impedance, 1000 Watt Power and Rubber Suspension for Vehicle Audio Stereo Sound System - MAX12D

  • 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked magnet structure, golden input terminals and dual 4 Ohm impedance.
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 12.09".
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 90.0dB and a special designed rubber magnet boot.
  • 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

2 Rockville W12T4S4 12" Shallow Mount 1400w Car Subwoofers, CEA Compliant, 4-Ohm

  • Rockville W12T4S4 12" Shallow Mount 1400 Watt Car Subwoofer, CEA Compliant, 4-Ohm Peak Power Handling: 1400 Watts RMS Power Handling (CEA-2031 Compliant): 350 Watts RMS 2" voice coil Ultra-Stiff Paper Composite Cone.
  • 3D Molded High Gloss Acrylic Dust Cap Ultra Slim, Expanded and Rolled Steel Basket High Density Laminated Butyl Rubber Surround.
  • High Power Strontium Magnet with Ultra Saturated, High BL Motor Gap Vented Core Magnet Motor Structure High Temperature Aluminum Voice Coil Former Lightweight Compact Design Ideal for Any Installation Rubber Magnet Boot.
  • Dual Chrome Plated Spring Loaded Push Terminals Shallow Mount Subwoofer Impedance: SVC 4 Ohm Cutout Diameter: 10.98 Inches Mounting Depth: 3.7 Inches.
  • Frequency Response: 34 Hz to 500 Hz Sensitivity: 89dB @ 1w/1m Enclosure Recommendations: Sealed: 0.67 cu. Ft - 1.7 Cu. Ft. Vented: 1.00 cu. Ft - 2.0 Cu. Ft..
Check Stock