ReviewsSteel Thread Repair

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

E-Z LOK EZ-329-6 Thread Repair Kit for Metal Carbon Steel Threaded Inserts 3/8-16 and Installation Tools

  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair tool kit..
  • CARBON STEEL INSERTS – Kit includes standard carbon steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • KIT INCLUDES – Convenient kit includes threaded inserts for metal, drill, tap, and threaded insert installation drive tool..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, #6-40 Internal Threads, 0.138\ Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

Axle Spindle Rethreading Tool Set Repair/Cleaning Threading Tools High-Strength Tools Set Easy To Store Thread Restorer Use With 1-1/4\ Socket Mechanic Tool Set For M20,22,24 13/16 3/4 x 20 UNEF 8pc

  • 【Used For Axle Threads Repair/Cleaning/Rethreading Tool Set】Axle spindle rethreading tool set can be used to repair/clean the axle threads on the spindle, effectively clean the rust and dirt on the thread, repair the worn thread,and recover the clear thread line. It is the best tool for cleaning axle threads..
  • 【Suitable For a Variety Of Thread Specifications & Wide Range Of Applications】Threading tools are suitable for a variety of thread specifications, including axle threads on the spindles of eight common mold sizes:M24 x 1.50, M24 x 2.00, M22 x 1.00, M22 x 1.5, M20 x 1.25, M20 x 1.50, 13/16" x 20UNEF, 3/4" x 20UNEF, and widely applicable, suitable for most vehicles..
  • 【Can Be Used With 1-1/4" Socket Or Wrench & High-Strength/Durable High-Quality Steel Material】Thread restorer mechanic tool sets can be used with 1-1/4" socket or wrench to help better repair/clean shaft threads ,save time and energy. Made of high-quality steel, with high strength and durability, it can provide long-term service and reduce the cost of frequent tool replacement.(package does not contain 1-1/4" socket or wrench. ).
  • 【Easy To Carry/Store】Thread restorer kit is packed in a high-quality plastic box, you can easily take it anywhere, and it is easy to store....
Check Stock

STYDDI Garden Hose Repair Kit, Solid Brass Mender Female and Male Hose Connector with Clamps, Fit All 1/2-Inch Garden Hose, 4 Set

  • ... repair kit for extending the service life of your hose..
  • SUITABLE FOR 1/2″ INCHES HOSE – This hose repair kit is designed basing on the inner diameter of the 12.7mm hoses, so it is great for the devices which accept 1/2″ inches connection, such as garden hose, water tap etc..
  • US STANDARD 3/4″ THREAD FOR A WIDE RANGE OF APPLICATIONS – The female thread adapter and male thread adapter are US standard 3/4″ thread, and suit for 3/4″ standard threaded which has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkler, nozzle, etc..
  • EASY TO INSTALL WHEN CONNECTING OR REPAIRING HOSE – This hose repair kit contains all you need to connect a hose or repair a hose. They are easy to connect and disconnect, and they could hold up for a long time. Repairing your hose can be done in about five minutes and making the hose work even better than before. This kit could definitely save you from having to buy a new whole hose..
  • All THE PRODUCTS INCLUDED IN THIS KIT IS REUSABLE – This hose repair kit includes 4 solid brass Female connectors, 4 solid brass Male connectors, 8 stainless steel clamps and 8 gaskets. They are ready for immediate use and reusable for futur....
Check Stock

E-Z LOK Coil Threaded Insert For Metal 18-8 Stainless Steel Helical Wire Thread Insert 8-32 Internal Threads, 0.328\ Length, Pack Of 10

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 8-32 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

2 1/2-13 Thinwall Thread Repair Inserts

  • 【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
  • 【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
  • 【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
  • 【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
  • 【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..
Check Stock

Autocraft - Spark Plug Thread Repair Kit | Fits M14 X 1.25mm Sizes | Repair Damaged Spark Plug Hole Threads | Rethreader Set with Thread Inserts

  • REPAIR ANY DAMAGED SPARK PLUG HOLES: The thread repair tool kit easily repairs the 14mm spark plug threaded hole port. It can be used for creating stronger internal threads in all metals, composites, polymers, and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • WIDE APPLICATION: The kit is widely used in the automotive industry, rail vehicle industry, shipbuilding industry, household appliances, construction machinery, business machinery, electronic products, engineering plastics, advanced furniture, aluminum die-casting and other industries..
  • MATERIAL USED: The kit is made of hardened carbon steel for high strength and long-lasting durability. Our carbon steel spark plug thread repair kit uses strict quality control standards, improved design, advanced production technology, and more durable products..
  • PACKAGE CONTENTS: The Rethread tool kit includes a tapping reamer and 4 different depths of inserts to repair deep-rooted plugs..
  • SATISFACTION GUARANTEED: We at Tool Liquidators solely believe in 100% customer satisfaction. If in any case, you are unhappy with your purchase, then please let us know, we will do anything required to make you a happy customer..
Check Stock

OEMTOOLS 25649 14mm Cylinder Head Rethreaded Kit | Mechanic’s Tool for Rethreading Cylinder Heads | Includes Combination Tap/Reamer & 3/8 7/16 1/2 & 3/4 Inserts | Rethread Aluminum Heads Only

  • EASY REPAIR: Next time you have to repair a spark plug, just reach for this easy thread repair tool kit. You won’t need anything else for your repair, and anyone can use it. Keep in mind, this product is meant only for use with aluminum heads.
  • QUALITY MATERIALS: Our spark plug thread repair kit is built to last with its steel parts.
  • VARIOUS INSERTS: This kit comes with everything you need to repair spark plugs in your machine. The sizes include the following: 3/8”, 7/16”, 1/2”, and 3/4” inserts, as well as a combination tap/reamer.
  • BACKING: Our OEMTOOLS 14mm Cylinder Head Rethreaded Kit is backed up with our OEMTOOMS Limited One Year , so if anything happens to your product, you don’t have to worry about it.
  • EASY TO STORE: This thread repair kit is the perfect size to store in one of your shop drawers, or it could even go in a drawer in your own home.
Check Stock

E-Z LOK Coil Threaded Insert for Metal 18-8 Stainless Steel Helical Wire Thread Insert 1/2-13 Internal Threads, 0.750\ Length, Pack of 5

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 1/2-13 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock