ReviewsSteel Truss Decking

304 Stainless Steel Start Clips Black Deck Clips Universal Decking Clips with Decking Screws for Composite Deck Boards, Hidden Fasteners (40)

• Stainless Steel Material: starter clips are made of quality 304 stainless steel, strong texture, corrosion resistance, not easy to fade or break, suitable for outdoor installation, can play a nice fastening effect, to provide you with long term service.
• Use Occasion: composite decking starter clips are applied to install composite decking with grooves on the sides, which conceal themselves while holding the deck in place, making them practical and attractive.
• Installation Method: place the hidden deck fasteners for composite on the floor joists and fix them with screws, one every 12 to 16 inches, then push the floor into the card, easy to apply, will not waste a lot of your time and effort.
• Rich Quantity to Meet Your Needs: the package includes 40 pieces of hidden deck clips, plenty quantity to meet your use demands, replacement demands and sharing demands, can give you a nice shopping experience.
• Equipped with Screws: each starter clips for composite decking comes with a suitable stainless steel screw, easy to install, which can save you the trouble of buying screws and bring you a nice use experience.

Hard-to-Find Fastener 014973284466 Truss Nail Drive Anchors, 1/4 x 1-1/2, Piece-1500

Light Truss Stand System by GRIFFIN | I-Beam Trussing Set & DJ Booth Platform Kit | Hanging Mount Lighting Package for Music Gear PA Speakers Can Lights | T-Bar Extension for Portable Audio Stage

• ...h or dj system with this stage light truss dj package. With two sturdy T-bar tripod stands, a 15 ft I-Beam truss span, 56 different par can hanging points and 40 hanging bolts, this mobile trussing light stand will allow you to hang up to 8 DJ light par cans or speaker per T-bar stand and up to 40 in total. Sturdy, steel tubing, it can hold up to 200 pd.The ideal DJ lighting stand for your DJ light bar or stage equipment!.
• EXTRA EXTENSION TRUSS PIECE FOR STAGE LIGHTS: Featuring an additional, third middle bar extension piece, this professional truss stand system offers you an incredible spread of 180 inches! The highly versatile design of the Griffin Lighting Truss Stand allows you to set it up in a variety of ways, making it an ideal solution. Vertical bottom tube 45 mm. Vertical middle moving tube 42 mm. Vertical top moving tube 38 mm. I-Beam Truss Pipe Diameter 35 mm. Leg tube 35 mm..
• PACK UP YOUR DJ TRUSS LIGHTING STAND IN A BREEZE: Boasting retractable legs that will fold down to a compact size, this stage light truss system is a must-have for performers who are constantly on the go. The soft, rubber rest pads on the feet make sure the stands stay firmly in place, without sliding or wobbling. Height: 70-158 inches (13 feet 4 inches). Total spread ....

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

• ... thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..

(300) Mushroom Head 3/16 x 7/8 Hammer Drive Pin Anchors Nail-in Hammer-in Rivet

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

• ... thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

• ... thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..

Adjust-A-Gate Steel Frame Gate Building Kit 36 -60 wide openings 5 - 6 high fence

• Adjustable Frame and truss system for quick installation with professional results for almost any application.
• All steel Frame prevents sagging and dragging adjustable Anti-Sag diagonal truss cable.
• All galvanized steel with UV powder coating finish.

Plastic Deck Clips Pack of 30 | Universal Plastic Decking Fasteners & Metal Deck Screws | Deck Clips for Composite Decking Boards | Plastic T Clips for Decking | Universal Deck Fastener Clips System

• WHAT’S INCLUDED- Each order includes 30 plastic deck T clips, 30 stainless steel deck screws, 1 square install bit, as well as detailed installation instructions..
• EASILY INSTALLED - These fastening porch deck clips allow for the installation to be done above the wood decking framework and installs in a variety of grooved composite deck boards. Instructions for installing these hidden fastener clips are included..
• PROFESSIONAL RESULTS- These plastic deck t clips help achieve a seamless, fastener-free composite decking making them the best universal decking fasteners available. The stainless steel deck screw are set in the fastener for easier installation..
• CONTRACTOR, COMMERCIAL & LARGE PROJECTS WELCOMED- We always offer discounts when purchasing 5 or more of any of our products..

IMScrews 100pcs #8 x 1/2" Self Drilling Truss Head Screws Standard Thread Wood Work MDF 410 Stainless Steel

• ✅Diameter: #8 (4.2mm), Length: 1/2 in (13mm), Material: 410 Stainless Steel.
• ✅Pack of 100pcs truss head screws in durable IMSCREWS plastic bag, prevent losing, it can be reserved for a long time..
• ✅Modified Truss head is extra wide with a low-profile dome and integral round washer..
• ✅SPECIAL FEATURE: 100% 410 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today..
• ✅For using in Steel, Sheet Metal, and attaches Metal or Steel to Metal or Sheet Metal Steel. Installed with #2 X-Shaped Phillips Driver..

2 Pcs EVA Foam Boat Flooring Decking Sheet Self-Adhesive Marine Carpet Yacht Kayak Decking Sheet Non-Skid Surfboard Traction Pad SUP Paddle Board Swimming Pool

• Premium EVA Foam ----- This boat decking flooring self adhesive pad are made from high quality EVA foam, has advantages of good cushioning, sound & shock absorption, non-skid. It is high tensile elongation, not easy deformation or damage, safe and can be durable for a long time ( Thickness: 6mm eva foam decking sheet).
• Feature ----- EVA foam boat flooring sheet feature with diamond grooves, can increase friction and play a good anti-skid, also can quickly guide rainwater out if it rains. EVA foam boat decking sheet provide exceptional comfort and traction, whether dry or wet.
• Easy to Install ----- Boat flooring decking sheet has strong glue at the back, self-adhesive to install boat flooring to the floor surface. It is also can be freely cut to a suitable size, eva foam boat decking flooring fit the different shapes of decks.
• Wide Application ----- EVA foam boat decking sheet perfect for boat decking flooring, RV flooring, kayak decking, yacht floor, floating dock, golf cart, swimming pool, boat trailer, surfboard, traction pad, motorboat, boat flooring decking, marine deck, car flooring or other place.