ReviewsSteel Tubing Pipe

General Tools RW121/2 Replacement Cutter Wheels Set of 2

The General Tools and Instruments RW121/2 gold standard tubing cutter wheel is the new quality standard replacement cutter for General Tools tubing....
General Tool's gold standard cutting wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts.
The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion.
The RW121/2 replacement cutter wheel is designed to fit all General Tools tubing cutters, Pro or Classic series.
The combination of shape, strength, and durability enable these cutter wheels to repeatedly provide quicker cutting without deforming the pipe's outer....

Check Stock

B BOSI TOOLS Tubing Cutter, 3/16 to 1-3/8 inch Outer Diameter Heavy Duty Pipe Cutter of Aluminum, Copper, PVC, Thin Stainless Steel Tube

【Large Cutting Capacity】This tubing cutter quickly and easily cuts 3/16" to 1-3/8" copper, brass, aluminum and plastic tubing, precision designed and constructed with thrust bearing feed for smooth cutting action. Each tool is tested to ensure accurate spiral free cutting..
【Clean & Precise Cut】B BOSI TOOLS professional copper pipe cutter set has 6 pieces of individual bearings allowing for increased cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting..
【Easy to Use】Slide the cutting wheel feed mechanism into place, line up the cutting wheel with the cut line and tighten handle, rotate cutter around tube, tighten knob every few turns until wheel cuts through, use reamer to smooth the edges of the cut..
【Widely Application】This convenient tubing cutter combo is a must-have for any toolbox. Ideal for refrigeration and plumbing programs. The cutter allows you to easily cut metallic tubing with a simple one-handed operation..
【Durability & Practicality】Heat treated alloy steel cutting wheel and high-grade steel construction make our heavy-duty copper tubing cutters perfect for plumbing, electrical, air conditioner installation, automotive, and DIY applications..

Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

...and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
Fixed head and angles make clean, precise flares.
Yoke type compressor with T-bar handle for firm grip.
For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
Pull back the blade and revolve the pipe while compressing.
2 rollers prevent skipping and jumping for most consistent tracking.
Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
Includes double flaring and bubble flaring instructions for use.
PACKAGE CONTENTS: Package includes hardened flaring bar assembly clamps with 10 SAE & metric tu....

Check Stock

Beduan Pneumatic Tubing Pipe 5/16

Wide range for working temperature and pressure.
Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
Tubing Pipe Features: Excellent flexibility, Small bending radius.
Excellent chemical properties, Minimal pressure loss.
PU Tubing Pipe Material: PU( Poly Urethane ).
PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).

Check Stock

EFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter

EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..

Check Stock

Reed Tool H8S Hinged Pipe Cutter for Steel, 8-Inch

Designed for rapid cutting of 6-Inch through 8-Inch steel pipe, heavy-wall steel pipe and cast-iron pipe.
Operates with minimal cutter rotation as necessary for tight quarters.
Clean cut with limited crimping or bending.

Check Stock

Superior Tool 36878 ST-2000 Pipe Cutter-5/8 Inch to 2-1/8 Inch Pipe Cutter , Gray

Cuts up to 1” schedule 40 pipe and 2” copper tubing,.
Tubing capacity is 5/8" - 2-1/8" and 1" pipe..
Tubing cutter wheeled can be replaced with item # 42348.
Cuts and deburrs a wide variety of pipe and tubing..

Check Stock

WORKPRO 3 Pieces Tubing Cutter Set - Pipe Cutter with 1/8”-1-1/4” Cutting Capacity Mini Copper Pipe Cutter with Deburring Tool Copper Aluminum Brass and Plastic Tubing Cutter

Clean & Precise Cut -- WORKPRO 3PC Tubing Cutter Set is designed to make quick cuts to copper and aluminum pipes. Moreover, this pipe cutting tool can be used for repairing burrs and flying edges on the inner holes and flat outer edges of tubes..
Large Cutting Capacity -- The large tubing cutter can cut 1/8”-1-1/4” outer diameter and 0.13-inch thick pipe. The cutting capacity of mini tubing cutter ranges from 1/8"-3/4” pipes with a maximum thickness of 0.1-inch..
Ball Bearing Rollers -- Instead of adopting traditional rollers, these two tubing cutters feature ball bearing rollers, which obviously reduce friction. In addition, these bearings provide you with a cleaner cut and allow for increased cutting speed..
Ultra-sharp Cutting Wheel & Blade -- Equipped with a built-in ultra-sharp cutting wheel, this tubing cutter set makes every cut smoother and more efficient. Furthermore, the two blades of the deburring tool are made of wear-resistant high-speed steel..
Ergonomic Design -- The pipe cutting tool is characterized by a large ergonomic knob, offering users a firm grip to apply more force during the cutting process. And the solid knob improves cutting efficiency by enhancing stability..

Check Stock

TIPU 1-3/8

Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.

Check Stock

ICOOL Single Flaring Tool & Swaging Tool Kit Brake Line Flaring Tool with Ratchet Wrench & Tubing Cutter for Copper HVAC Water Gas Pipe Brass Magnesium and Soft Steel Lines

【TOTAL PACKAGE】This comprehensive 10 pcs tool kit includes 1 flaring cone, 2 flaring bars, 5 swaging adapters, 1 tube cutter, 1 ratchet wrench and....
【RANGE OF FLARING】Flaring tool applies to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"O.D. tubing.
【RANGE OF SWAGING】Swage adapters are suitable for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing.
【OTHER TOOLS】Tube cutter applies to copper pipe/ tubing, HVAC water gas pipe, brass, magnesium and soft steel lines, its cutting capacity is....
【DURABILITY & PORTABILITY】 The flaring tool kit is solid and handy, which is built from the toughest steel and chrome plated. A hard plastic....

Check Stock

ABN Exhaust Pipe Cutter Tool - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool Muffler Pipe Cutter

CUT PIPES EASILY: Quickly remove old exhaust pipes with the ABN Exhaust Pipe Cutters.
Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness.
ACCESS HARD TO REACH AREAS: 10 inch (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts.
DURABLE CUTTING BLADES: High-quality carbon steel cutting blades effectively cut through metal and plastic.
Each exhaust tube cutter wrench tool features 15 cutter blade wheels.
EASY TO USE: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
COMFORTABLE GRIP: 9.3 inch (23.6cm) exhaust pipe cutting tool has 3.8 inch (9.7cm) rubberized handles.
Cushioned for comfort and non-slip security.

Check Stock