ReviewsSteel Tubing Supplier

mistcooling Misting Fan Kit-18” Fan with 1500 PSI Misting System-Residential, Restaurant and Industrial Misting Pump – High Pressure (White Color) (6 Fans 18\ White)

Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
- 110v AC (Available in 12vdc and 220v on request).
- Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor us e - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..

Check Stock

Rapid Repair RP77271 1/8 Inch to 1-5/8 Inch Outside Diameter Pipe and Tubing Reamer, Red (Single Pack)

Removes burrs on tubing from 1/8 inch to 1-5/8 inch outside diameter.
NOTE FOR USE: Little pressure is needed to deburr smaller pipe and tubing, too much force will cause damage to the pipe or tubing.

Check Stock

HORUSDY 7 Dies Flaring Tools Set For Sizes 3/16' -3/4' Refrigeration HVAC 45 degree Heavy Duty Eccentric Cone Type Kit for Water Gas Refrigeration Brake Line Applications,

The clever clutch mechanism automatically prevents over-tightening.
Off-set yoke reduces friction and force required, working together to produce perfect SAE 45° flares every time on copper, brass, aluminum and other soft steel tubing. Will also flare hard copper, steel, stainless steel and brass through a wall thickness of 0.035 inches。.
It creates a perfectly smooth flare. Will not crush the tubing. Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow, giving uniform flare walls without galling. Ideal for Water, Gas, Refrigeration, and Brake Line Applications.
A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort.
Pipe sizes for the Flaring Tool are 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4".
Silver flaring bars are heat-treated for durability and secure grip on tubing.

Check Stock

The Stop Shop Inverted Double Flare Tool for 3/16 Inch and 1/4 Inch Tubing with Hard Plastic Case

This flare tool will make inverted 45 degree double flares for 3/16" AND 1/4" tubing. Not recommended for stainless steel tubing.
Included: Plastic hard case for storing, removable handle and block, double sided OP tool for both 3/16" & 1/4", tube stoppers for both 3/16" & 1/4" & an allen key wrench.
We recommend using this on regular steel and copper nickel tubing.
The handle is removable if you prefer to use it in a bench vise. You can also use this while the tubing is still on the car..

Check Stock

Parker A-Lok 4 TIZ .125-SS 316 Stainless Steel Compression Tube Fitting, Insert, 1/4\ Tube OD, 0.125\ Tube ID

Insert fitting has one or more ribs for creating a tight seal and connects two pipes or tubing in a straight run.
Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
Suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants.
Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing.

Check Stock

Parker A-Lok 4 TIZ .125-SS 316 Stainless Steel Compression Tube Fitting, Insert, 1/4\ Tube OD, 0.170\ Tube ID

Insert fitting has one or more ribs for creating a tight seal and connects two pipes or tubing in a straight run.
Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
Suitable for use in chemical, petroleum, power generation, laboratory, and medical device plants.
Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing.

Check Stock

M MINGLE Garden Hose Adapter, 3/4 Inch Female GHT to 1/4 Inch NPT Irrigation Tubing, Brass Faucet Connector, with Extra 8 Washers

Includes 4 pieces brass faucet adapters (each has a washer inside), 4 pieces stainless steel lock cap parts and 8 pieces extra garden hose washers..
The hose adapter provide safer connection between irrigation tubing drip and garden hose. Barbed part of adapter and the stainless steel lock cap tighten the tube. The double connector ensures no leakage..
The female adapter with 3/4 inch thread fitting, fits any 3/4” male GHT (garden hose thread) watering equipment. Such as garden hose, hose splitter, inline hose filter, hose shut off valve and outdoor faucet..
The brass adapter with 1/4 Inch male NPT, connect to most 1/4 inch tubing hose. Fits PE tubing, PU tubing (outer diameter: 6mm, inner diameter: 4mm ), PVC drip irrigation tubing (OD: 7mm, ID: 4mm)..
AMZ Tool is professional on Garden Hose Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

Wostore Double Flare Tool Adapters 7 Pcs 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 Inch Tube Expander Flaring

The kit includes 7 PCS flaring adapters..
Flaring tool adapters apply to 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" O.D.tubing..
Designed to use when flaring double flare in copper, aluminum, magnesium,and brass tubing as well as soft steel brake line tubing..
Multiple size options,meets almost all your flare needs..

Check Stock

ICOOL Inner-Outer Pipe Reamer/Tube Deburring Tool 3/16 to 1-5/8 inch for Copper PPR PVC Brass Aluminum Soft Steel Tubing and Pipes

【Capacity】The reamer is suitable for the diameter of tubing and pipes from 3/16 to 1-5/8 inch..
【Versatile Tools】Prepares for tubing soldering, removes burrs from sharp edges, such as copper, PPR, PVC, brass, aluminum, soft steel tubing and....
【Efficient Tools】Specifically designed for various tubing with tight space. The reamer is suitable for the inside and outside of the pipeline to....
【Sturdy Design】Long wearing steel blades for a long service time. Grooved durable hard plastic body for better grip..
【Multiduty】Reamer can work perfectly especially in tube cutting, deburring copper pipes in the air conditioner installation and vehicle repair..

Check Stock

Tube Pipe Hose Bead Roller Intake Intercooler Piping Pipe Bead Roller Tool Fits Clamps 5/8″ DIY Tool and larger tubing Machine

【FITS MODEL】- Fits 5/8″ and larger tubing.
【APPLICATION PIPE SIZE】- Suitable for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm).
【PREMIUM QUALITY】- Manual Bead Roller made of high quality steel and aluminum material components. Direct replacement for Tubing Beader Tool, meet or exceed the OEM standard.
【SIMPLE OPERATION】- Just insert the end of the tubing between the dies and start turning the handle. Give the wheel a quarter rotation with each full tubing rotation gradually tightening the die against the tubing. Please note that always apply the bead before welding.
【12-MONTH WARRANTY】- Package include 1 x Tube Pipe Tubing Beader Tool. If you have any questions about Tubing Beader Tool, please contact us and we will reply you as soon as possible.

Check Stock

Flexzion Flaring & Swaging Tool Kit 45 Degree Tubing 1/8 to 3/4 inch for Soft Copper Tube Extrusion Type Water Gas Line Automotive Plumbing 14 Pieces Cone with Portable Carring Case

Copper tubing flaring + swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
The 45 degree cone for flare. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.
Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
Self centering, slip-on forged steel yoke. All in a hand carrying plastic case red color box.

Check Stock