ReviewsSteel Welded Pipe

John Boos GT-8 Carbon Steel Grease Interceptor 14.2 Long by 11.2 Tall by 10.5 Wide 8 lbs Grease Capacity

This Grease trap has an 8 pound grease capacity and measures 14.2" Long by 11.2" Tall by 10.5" Wide. It measures 2" from top to pipe opening, 7.5" from pipe opening to base.
Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating.
Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed..
T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic.
This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute.

Check Stock

Corona Hercules Post Hole Digger PD60000

Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
Returns will not be honored on this closeout item.

Check Stock

Seymour DG-16 6-1/2-Inch Post Hole Digger

Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
Returns will not be honored on this closeout item.

Check Stock

BestEquip 42-5.5 Safety Bollard, 5-1/2\ OD Safety Barrier Bollard, 42\ Height Yellow Powder Coat Pipe Steel Safety Barrier, with 4 Free Anchor Bolts, for Traffic-Sensitive Area

Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 42 in/106.6 cm. Welded and integral structure enables the bollard post to withstand impact..
Yellow Finish 5.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 5.5 in/14 cm..
Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..

Check Stock

BestEquip Safety Bollard 36-4.5 Safety Barrier Bollard 4-1/2\ OD 36\ Height Yellow Powder Coat Pipe Steel Safety Barrier with 4 Free Anchor Bolts for Traffic-Sensitive Area

Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 36 in/91.4cm. Welded and integral structure enables the bollard post to withstand impact..
Yellow Finish 4.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 4.5 in/11.4 cm..
Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..

Check Stock

HITBOX 4 in 1 Aluminum MIG Welder 200Amp 110V/220V Smart Control IGBT DC Inverter TIG Welder + MMA Stick Mix Gases Gasless Flux Solid Core Wire Welding Machine

【ALL in ONE】 Smart welder for everyone. HITBOX 4 in 1 Function welder starts welding with a button! Choosing weld mode, material, weld wire,....
【Multi-Material Weldable】HITBOX MIG200P inverter welder could weld aluminum, iron, carbon steel, stainless steel, etc. Applies to pipe....
【MIG/MAG Welder】 1. MIXGAS can use 0.6 / 0.8 /0.9/ 1.0mm flux wire. With 0.6 / 0.8 / 1.0mm wire, it can be welded with a thickness of 0.6-3.4mm.....
【TIG /WIG Welder】 Suitable for 1.6 mm and 2.4 mm tungsten. With 1.6 mm tungsten, it can be welded with a thickness of 1.0 to 4.8mm, and with 2.4....
【MMA /ARC Welder】Current 40-170 amperes. 2.5 / 3.2 / 4.0mm electrodes can be welded. Welding thicknesses from 1.6 to 6.4 mm can be welded using....

Check Stock

Stainless 2.5" 90 Degree Mandrel Bend Elbow - 14GA/.078" Wall - 1.5" Leg - SS304 Stainless Steel Exhaust Elbow Piping for Car Exhaust Pipe Modified, Stair Handrail, etc - KOTVTM

【Material】: SS304 Stainless Steel 90° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2.5 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, etc.
【OD】: 2.5"/63mm, The outer diameter of the elbow is 2.5". Height（L): 5.51"/140mm.
【Quantity】: Single Elbow. 100% brand new.

Check Stock

KOTVTM 2" Stainless Steel Elbow 45° Mandrel Bend Elbow - 1.5D/3" CLR Loose Radius - 16GA/.065" Wall - 2" Legs - SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Pipeline engineering, etc

【Material】: SS304 Stainless Steel 45° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, Pipeline engineering, etc.
【Quantity】: Single Elbow. 100% brand new.

Check Stock

VEVOR Rack Ratchet (2\ OD Round Pipe)

Effortless Installation: The ladder rack ratchet can be either bolted or welded. It is complete with bolt mounting hardwaret. 2 Inches OD round pipe steel..
Thoughtful Design: The rubber pad reduces friction between the machine and the ladder rack ratchet strap, which reduces damage to the machine surface. Widen the diameter of the handwheel to save more effort, tighten forward and lock backward..
Ratchet Tie Down: The rack ratchet with strap adopts a smooth ratchet structure, which is used for one-way drive and is commonly used in manual winches to prevent reversal. The ladder rack ratchet is made of alloy steel with a 1,000 lbs capacity for high durability..
9" Polyester Strap: The ladder rack tie-down straps are equipped with an extended ribbon to increase cargo the loading range of cargo volume. The length of the strap is similar to that of the same product. Strap length: 9 ft / 274 cm..
Wide Application: Ladder tie-down straps are used for ladder racks and truck racks. Perfect for tying down cargo and lumber. The frame can be welded or bolted onto the rack. It is suitable for a variety of mounting styles, ideal for almost any rack..

Check Stock

ZOEYES 4 PCS Stainless Steel Exhaust Elbow, 2.5”Mandrel Bend Elbow - Thickness 16GA/.065”Wall, SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Stair Handrail, 90 Degree

Parameter - 2.5”Exhaust pipe 90 degree elbow.
Diameter: 2.5inch, Bend Degree: 90º, Wall Thickness: 16GA/.065”, Back arc length: 6inch (These elbow exhaust pipes can be welded to 2.5”OD tube).
Sturdy & Durable - Our 2.5”elbow exhaust pipe made of premium SS 304 stainless steel, smooth edge and mirror polishing.
Not easily damage, anti-rust, anti-oxidation 2.5 exhaust pipe.
Easy to Install - Laser cut end make the pipe ready to weld and easy to use, the elbow exhaust will save your time and energy.
Wide Application - These universal exhaust pipes are suitable replacement for your car modification, stair handrail welding, or complete own custom DIY exhaust system.
Package List - You will get valued 4 pieces of 90 bend elbow pipes.
No pollution: healthy, environmentally friendly, non-toxic and non-polluting.

Check Stock

FROGG TOGGS Women’s Classic All-Purpose Waterproof Breathable Rain Suit

【Material】The Universal Motorcycle Exhaust Aesthetically pleasing carbon fiber finish which made with Aluminum+Stainless steel，Reducing Overall Weight For Top Performance To Obtain Max Output.durable, corrosion resistance and rustproof..
【Suitable for Various Bike Styles】：It is a universal slip on exhaust muffler that works with various bike including dirt bikes, street bikes, scooters, ATVs, quad and other bike with pipe diameter 38 mm to 51 mm. This is made possible by its welded stainless steel adapter which enables it to seamless blend fit pipes from 38mm to 51mm.
【Great Sound 】Great sounds With a removable DB killer for changing sound. you can hassle-freely to make it super-loud when you remove DB killer, and you can also put the DB killer in to minimize the sound produced..
【Specification】Overall Length: 365mm,Connection: 51mm Slip-on type.
Motorcycle Unversal Exhaust Slip on Silencers & Mufflers ,1.5-2″ Inlet Stainelss Steel Motorcycle Exhaust Muffler Slip on.
【Warranty】:Manufacturer warranty for 90 days from date of purchase.
The muffler exhaust come with complete accessories include DB killer, springs and hooks, stable clamps and universal connected pipe. It’s easy to install.

Check Stock