ReviewsSteel Wheel 8 5 24

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

...switch and SIR modules on current GM vehicles.
Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience.

Check Stock

FABFEGU Bikes Men 29 Inch Folding Fat Tire Mens Mountain Bike, 17-Inch/Medium High-Tensile Unicycles Adults 28 Inch (Black, 581)

R / Bicycle Sweater Touring Bicycle Steel Bike Mountain Men 29 Mini Bikes Adults Electric Mountain Bike 24 Inch Women 20 Mountain Bike 6 26 Inch Mountain Bike Tires And Giant Bike Seats Men Adult Three Wheel Bikes Women Bike 26 Inch Womens Women's Bike 26 Inch 26 Inch Bike Wheels with Brakes 29 Inch Bicycle Spoke Kickstand Mountain Bike Men Bikes Adult Rear Brakes Bike Tire Bike Wheels Quad Bikes Boys 26 Inch Mountain Bike Wheels Set Kids Bike Gears Girls Girls Mountain Bike 20 Inch Teal 24 Tire.
B Bike Men 26 Kids Bike 16 Girls 12 Inch Bike Womens Bicycles 26 Inch Mountain off Road Bicycles Women Women's Bikes 24 Inch Mountain Bike Womens 24 Bicycle compatible with Motorized Unicycle Mountain Bikes Kids 24 Inch Boys Bikes Women 26 Inch 7 Girls Mountain Bikes That Have 24 Inch Tires Woman S Bikes 24 Inch Bike 16 Inch Boys Bicycles Girls 8-12 Teal Mountain Bikes under 300 Womens Bicycles 24 Inch 7 Bicycle 24 Inches Boys Mountain Women Bikes Lightweight Bikes 26 Inch Large V Frame Mountain.
Ti Bicycle 350 Capacity Mountain Bikes Girls 24 Womens Comfort Bike 24 Inch 20 Boys Mountain Bike with Gears Mountain Bikes Men Inch 24 Kids Bike Big Tires E Bikes Women Full 3 Wheel Bike Mountain Bike Rear Brake Women Mountain Bikes 26 Inch Hyper Havoc 26 Mountain Bi....

Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
Chrome and black oxide finishes resist rust and corrosion.
Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.

Check Stock

Grand General 10508 Stainless Steel Front Hub Cap with 7/16\ Lip and 5 Uneven Notches

Fits 20 inch, 22.5 inch and 24.5 inch wheels with 8-23/32 inch diameter center hole.

Check Stock

PURUI 6PC 8 Inch Stainless Steel Polishing Buffing Wheel Kit for Bench Grinder,kit with Each 1PC 5/8 Inch Arbor Hole Sisal/Denim/Cotton Wheel and Each 1PC 100g Bar Black/Green/White Polishing Compound

This stainless steel buffing kit includes 3pcs 5/8 Inch arbor hole stainless steel buffing wheel and 3pcs 100g bar stainless steel polishing compound..
Used on 8 Inch bench grinder to polish stainless steel to get a final high finishing surface..
The stainless steel buffing wheel includes each 1pc sisal buffing wheel, denim buffing pad and cotton buffing wheel. The stainless steel buffing compound includes each 1pc black, green and white polishing compound..
3 steps to polish the stainless steel products to get a bright finish. First stage, use sisal buffing wheel plus black polishing compound to remove rust, marks, scratches and leave a uniform finish. Middle stage, use denim buffing pad plus green polishing compound to remove the dull finish and leave the workpiece with a semi-bright finish. Final stage, use cotton buffing wheel plus white polishing compound to remove the semi bright finish and leave the workpiece with a bright finish..

Check Stock

SCOTTCHEN Airway Buffing Wheel Extension Shaft 2-1/4 L Angle Grinder Buff Extender Kit 5/8 -11 Threads Arbor Extended Adapter Steel - 1set

【Application】This 5/8" Shank Cotton Buffing Polishing Wheel Extender suitable for Angle Grinder with 5/8"-11 threads mandrel and fit for polish....
【Function】This 5/8" Buffing Wheel shaft extender is used for extend the mandrel length then can fit thicker buffing wheels /airway buffing wheels,....
【High Quality】This 5/8" Buffing Wheel extension’s screw shaft and washer are made of firmness steel, the threads tube is made of aluminum, which....
【Excellent Effect】This buffing adapter is good effect to extend the shaft length of angle grinder and make your buffing work more easy and....
【Dimension】Threaded shaft dia x L: 5/8” x 1-7/8”, threaded tube ID x OD x L: 9/16” x 15/16” x 2-1/4”, Washer dia x thickness: 1-5/16”....

Check Stock

RHKING 4 Wheel Trolley Assembly Roller Trolley 2Pcs Silent M10 Bolt for use with 1-5/8\ Wide and All 1-5/8\ or Taller Strut Channel

✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound..
✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection.
✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work..
✅ Can used upside down: 3 nuts are prepared in the accessory,so that you can use the dollies upside down..
✅Apply: For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel.

Check Stock

Service Caster Brand 3 Inch 316 Stainless Steel Light Duty Threaded Stem Caster Set of 4 Blue Poly Caster Wheels and 3/8” Stems – 1,200lbs Total Cpty –2 Swivel/2 Swivel Casters with Locking Brakes

These Service Caster Series #20 Stainless Steel Polyurethane casters offer various wheel sizes and mounting heights: 3” Wheel: 4-1/8” mounting height.
3-1/2” wheel: 4-5/8” mounting height.
5” wheel: 6-1/8” mounting height. Wheels are offered in five different colors – Gray, Blue, Black, Maroon, and Red..
Weight Capacity: 3" and 3.5": 300 lbs Capacity/Caster.
All casters feature a 3/8” diameter (16 TPI x 1-1/2”) threaded stem. Threaded stems can be difficult to measure. Service Caster recommends having existing threads checked on a thread gauge to determine correct thread size before ordering. Don't see the size you need? No problem! Call us or message us by clicking the blue Service Caster Corporation hyperlink underneath the buy or add to cart button and then clicking the ask a question button..
Brake options include a top lock brake (TLB) or a total lock brake (TTL). The top lock brake (TLB) places a positive locking force against the wheel tread locking the wheel only. The total lock brake (TTL) also places a positive locking force against the wheel tread, but the total lock brake (TTL) simultaneously locks the wheel and the swivel for a complete stationa....

Check Stock

Slsy Adult Tricycles 7 Speed Adult Trikes 20/24 / 26 inch 3 Wheel Bikes Three-Wheeled Bicycles Cruise Trike with Shopping Basket for Seniors Women Men.

★PLEASE MAKE SURE THE SIZE before purchasing: 20" wheel suitable for rider height: 4'8" - 5'6", 24" wheel suitable for rider height: 4'11" - 5'10",....
★STURDY DESIGN & EASY TO INSTALL: Sturdy steel construction supports capacity up to 350 lbs. 3-wheeler design means you'll always have a consistent....
★LARGE CAPACITY BASKET: SLSY tricycle has a large rear basket, load up the conveniently basket with groceries, supplies, or whatever suits your....
★PRACTICAL THREE WHEEL BICYCLE: Comfortably for you enjoy riding around town, the beach, or just an afternoon cruise. SLSY adult trike bikes are....
★SATISFACTION GUARANTEE: SLSY adult trike also comes with a one-year warranty on all defective or damaged parts. 30-day return & money back....

Check Stock

ZEKOO 11 FT Sliding Barn Door Hardware Kit Use for Double Doors Closet Track

...ck where you want, the length of the track needs to be twice the width of your 2 doors. Fit for 1-3/8" to 1-3/4" door panel thickness. we will provide the proper bolts and spacer to you for other thickness doors you need contact us..
【Why Choice Our Barn Door Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is 2 pieces 5.5FT Pre-drill 16" apart hole on rail to line up standard studs..
【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3mm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold 260lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly..
【Barn Door Hardware Kit Package include....

Check Stock

Astro Pneumatic Tool PRN1 3/8 Capacity Pneumatic Rivet Nut Setting Kit - Metric & SAE

Includes 8 mandrels/nosepieces in the following sizes: M4, M5, M6, M8, M10, 1/4", 5/16", 3/8" (additional 8-32, 10-32, 10-24 avail. from Astro).
Instantly set rivet nuts with the pull of the trigger, if setting 3/8” tool may require two strokes if working pressure is .
Quickly un-thread set rivet nuts by operating free spinning rear wheel (keep mandrel lubricated).
2680lbs of instant air-hydraulic pulling force.
Max capacity: M10 (3/8") steel and aluminum rivet nuts, M6 (1/4") stainless rivet nut.

Check Stock