ReviewsSteering Shaft Clamp

(4-Pack) Zinc Plated Carbon Steel 5/8” Bore Shaft Collars Sets - Screw Style Bore Shaft Collars with 5/8” Bore Size, 1-1/8 Outer Diameter, and 1/2 Width - Suitable for Automotive and Industrial Use

  • ... of these bore shaft collars has an outer diameter of 1-1/8 inches, a 1/2 inch width (thickness), and a 5/16-18 inch clamp screw diameter..
  • SUITABLE FOR AUTOMOTIVE AND INDUSTRIAL USE - These are just two of the most common applications for these bore shaft collars. Common usage includes situating components in power steering assemblies, locating components on conveyor belt systems, and more. If you are unsure if these are the parts you need, remember that round bore shaft collars’ usual usage is as locators, spacers, stops, and bearing faces..
  • WIDE RANGE OF OPERATING TEMPERATURES - These round bore shaft collars can operate within a temperature range of 0 to 250 degrees Fahrenheit (-17 to 121 degrees Celsius), making them highly suitable for a wide variety of applications that exposure to low and high temperatures..
  • US-BASED CUSTOMER SERVICE - We’re here for you. Contact our US-based customer service team for product-related queries before you place your order or even after you receive the product. We’re dedicated to providing you with the best shopping experience..
Check Stock

KIMISS Steering Wheel Spinner Knob, Power Handle Car Steering Wheel Knob for Car Vehicle Universal

  • Increased ManoeuvrabilityProvides quick and easy 360 degree steering control for increased manoeuvrability..
  • Easily Transferred between VehiclesWith its quick and simple to fit clamp. Easily transferred between vehicles with its quick and simple to fit clamp..
  • High qualityHigh quality plastic construction with stylish chrome finish. The spinner is in classic black color and smooth retro look will only enhance your car interior..
  • Excellent functionThe steering wheel spinner eases single hand steering through increasing the torque of the steering wheel. This allows smoother turns, especially U-turns, faster parking, safer lane merging and in general handling tight spots..
  • FitmentUniversal fit for most steering wheels.You can buy and use with confidence..
Check Stock

CartClan Club Car DS Steering Column Rebuild Kit 1992-Up Gas & Electric Golf Cart 1014216

  • UNIVERSAL DESIGN that can be made to fit most vehicles by modifying the wiring harness to the vehicle’s harness, mounting brackets, steering shaft, and steering wheel.
  • 28” COLUMN LENGTH IS MEASURED from the top of the bell to end of the output shaft.
  • INCLUDES (optional) 9-hole GM steering adapter, tilt, turn signal & hazard levers, and GM-style electrical plug.
  • CHROME FINISH for great looks and long life.
  • ACCEPTS ANY 1969-1994 GM steering wheel or adapter.
Check Stock

Steering Column Lower Shaft Fit 2003-2009Toyota 4Runner 2007-2010Toyota FJ Cruiser 2003-2004 Lexus GX 470 OEM 45203-35310

  • Steering Column Lower Shaft Fit :2003-2009 Toyota 4 Runner.
  • Quality Intermediate Steering Shaft, also known as a Steering Column. Its function is to connect the steering wheel with the car's steering gear, makes it easy to turn your car wheels..
  • It is a aftermarket product but the exactly can suit for your car..
  • Refund and Replacement freely. If you are not satisfied with our product.Almost all the products you find on Amazon are from the same manufacturer, maybe only the pictures are different because some sellers have better PS technology, so why not consider the cheaper price.
Check Stock

Rudedog USA 5003 Lock Collar with Grommet Kit. For 3/4\ Hex Bar only

  • Used for shaft fixing and positioning, SBR linear rail stopper, for DIY CNC Routers Lathes Machine..
  • Design fully engages the shaft. Easily installed.
  • High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong..
  • The shaft can be clamp-on tightly by set screw, the shaft will not be damaged.
Check Stock

A ABIGAIL Lower Intermediate Steering Column Steering Shaft Assembly Fits for 2005-2015 Toyota Tacoma 4WD & PreRunner 2WD or 4WD Replaces 4520304021

  • UNIVERSAL DESIGN that can be made to fit most vehicles by modifying the wiring harness to the vehicle’s harness, mounting brackets, steering shaft, and steering wheel.
  • 32” COLUMN LENGTH IS MEASURED from the top of the bell to end of the output shaft.
  • INCLUDES (optional) 9-hole GM steering adapter, tilt, turn signal & hazard levers, and GM-style electrical plug.
  • CHROME FINISH for great looks and long life.
  • ACCEPTS ANY 1969-1994 GM steering wheel or adapter.
Check Stock

Ear Clamp Pliers with 12pcs Single Ear CV Boot Clamps Band Tool Kit, Ear Clamp Pincer, Ear-Type Clamp Crimp Hand Tool Ear Type CV Joint Axle Boot Clamp Pliers Tool for Auto ATV UTV

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275″ (7mm) in width & 0.023″ (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354″ (9mm) in width & 0.031″ (0.8mm) in thickness..
  • Material: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Function and Use: These clamps are locking secure and tight on drive & CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • What You’ll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small CV....
Check Stock

Wedge Guys Rubber Vise Clamp for Golf Club Repair Regripping Reshafting Refinishing Custom Refurbishment & Replacement – Snugly Protects All Golf Club Shafts, Wedges Irons Drivers Putters & More

  • The Rubber Vise Clamp by Wedge Guys is an essential tool for those looking to keep their golf clubs protected while repairing, reshafting, refinishing, refurbishing, replacing, or regripping golf clubs in a bench vise..
  • HOLDS FIRM – At Wedge Guys we believe a firm shaft is better! The side ribs on the rubber vise clamp increases friction in your vise with less pressure while the diamond channel locks your shaft in place, keeping your club shaft more firm and steady while you work..
  • PROTECTED – Work on your golf clubs without worry! The Wedge Guys rubber vise clamp will help protect your golf club shaft against marring and guard against breakage..
  • MULTI-USE – The Wedge Guys vise clamp is 3.5” long, Made in the USA, and great for a variety of applications for use with any golf clubs including wedges, irons, drivers, putters, and more..
  • **Although the rubber vise clamp is made of high-grade thick rubber, prevents slippage, and keeps your club tight and protected in the vise during repair, be sure not to overtighten**.
Check Stock

Drive-up EZGO TXT Intermediate Steering Shaft Assembly Joint for 2001-Up Golf Cart 70580-G01

  • Fits 2001-up EZGO Gas & Electric Golf Carts..
  • Used on 2001-current Gas & Electric TXT, ST 480 (Gas), ST Sport, ST Sport II, ST Express, Clays Car, 4/6-Passenger Shuttle, 2/4/6-Passenger Bellhop, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher, Refresher 1200, Cushman 280 and Cushman 2200 Connects steering shaft to steering box..
  • Metal Intermediate Steering Shaft with 36 tooth..
Check Stock

Genuine Mopar Intermediate Shaft - 68066178AA

  • OEM NEW 2.0L Intermediate Steering Column Shaft 2003-2007 Saturn Ion 15799676.
Check Stock

Mophorn Helm Outboard Hydraulic Steering Pump 300 HP Hydraulic Pump HH5271-3 for Cruisers Runabouts Boats

  • Front Mount Pump: This helm is ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. It is also suitable for speeds up to 60 MPH. The helm allows you to install all of the reliability and comfort of hydraulic steering onto your boat. Get ready to take your boat to the next level..
  • 1.7 Hydraulic Helm: Our front mount 1.7 hydraulic helm provides smooth and efficient no feedback steering for single and multi-outboard engines up to 300 HP (600 HP combined for counter rotating twins) for speeds up to 60 MPH. 4.9 turns lock-to-lock in most typical single cylinder outboard applications..
  • Shaft Seal & ORB Fitting: The pump has a shaft seal that can be easily replaced, this is a user-friendly design for your use. And the positionable stainless steel O-Ring (ORB) fittings for easy hose routing..
  • Built-in Two-way Lock: The hydraulic helm pump is equipped with the replaceable shaft seal, built-in lock valve, relieve valve, and air pocket. These details make it convenient for you to use..
  • Sturdy Aluminum Alloy: The hydraulic steering helm is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Constant seasonal replacements will no longer be....
Check Stock