ReviewsStem Spacers

Supreme Suspensions - 2' Wheel Spacers Kit for 2001-2010 Ford Explorer Sport Trac 2WD 4WD - BP: 5x4.5 / CB: 87.1mm / Studs: 1/2' x20 [4pc Black Pack] - 4 Tire Valve Caps Included

  • COMPATIBLE WITH 2001 - 2010 Ford Explorer Sport Trac (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Lug Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
  • SPECIFICATIONS: 2 Inches Thick, 5 x 114.3mm (5 x 4.5") Bolt Pattern, 1/2" x 20 Studs, 87.1mm Center Bore | NOTE: Spacers are lug-centric, and centered using the precision machined taper seat on the lug-nuts. Centering rings are recommended for certain types of OE or Aftermarket wheels..
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Bil....
Check Stock

Supreme Suspensions - 4pc Set of 2 Wheel Spacers for Polaris ACE + RS1 + RZR 570/800/900 | 4x156mm Bolt Pattern 3/8 x 24 Studs & 131mm Center Bore ATV Wheel Spacer [Silver]

  • ...OMPATIBLE WITH 2016 - 2019 Polaris Ace (All models), 2012 - 2019 Polaris RZR 570, 2008 - 2014 Polaris RZR 800, 2008 - 2013 Polaris RZR 900, 2019 - 2021 Polaris RS1 and 1999 - 2006 Polaris Diesel 4x4. *Does NOT fit models with DUALLY setup..
  • CONTENTS: (4x) Lug-Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack..
  • SPECIFICATIONS: 2 Inches Thick, 4 x 156mm Bolt Pattern, 3/8 x 24 Stud Size, 131mm Center Bore (Matches Vehicle Hub Diameter) | NOTE: Our wheel spacers will NOT work with any other sized nut or center bore larger than 131mm. Please verify this to prevent fitment problems..
  • BENEFITS: Positions your wheels 2 inches outward to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure pro....
Check Stock

BELSIZE Bike Stem Riser, Bicycle Handlebar Extender, Fit for 1-1/8“(28.6mm) Fork, Adjustable Raiser for Road Bike, MTB, BMX Bike

  • Wide Applicability: Belsize bike stem riser is suitable for most bikes with front fork tubes of 1-1/8'' (28.6mm) in diameter..
  • Adjustable Height: Coming with 4 spacers (1×5mm & 3×10mm), you can adjust the height of the stem by combining them in different ways, up to 3.46” (88mm), so that the bike perfectly meets your riding needs..
  • Comfortable Riding: If you are suffering pain in the neck or wrist even back because of your low handlebar, try this stem riser, it can relieve your pain as you can sit more upright by adding heights..
  • Premium Material: Made of aluminum alloy, lightweight with high-strength. It is also anti-rust and wear-resisting, durable to last for a long time..
  • Easy Installation: Find a 5mm wrench (package is not included), then slide the stem riser to the front fork tube, adding the original bike stem back and fits all screws, then you will have a more comfortable riding..
Check Stock

Supreme Suspensions - 4pc Set of 2 Wheel Spacers for CAN-AM Maverick, DS450 & Commander 800 + 1000 | 4x137mm Bolt Pattern M10x1.25 Studs & 110mm Center Bore ATV Wheel Spacer [Silver]

  • COMPATIBLE WITH 2011 - 2014 Can-Am Commander 1000, 2011 - 2015 Can-Am Commander 800, 2008 - 2012 Can-Am DS450 and 2013 - 2021 Can-Am Maverick. *Does NOT fit models with DUALLY setup. THIS KIT IS NOT COMPATIBLE WITH MAVERICK X3 MODELS..
  • CONTENTS: (4x) Lug-Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack..
  • SPECIFICATIONS: 2 Inches Thick, 4 x 137mm Bolt Pattern, M10 x 1.25 Stud Size, 110mm Center Bore (Matches Vehicle Hub Diameter) | NOTE: Our wheel spacers will NOT work with any other sized nut or center bore larger than 110mm. Please verify this to prevent fitment problems..
  • BENEFITS: Positions your wheels 2 inches outward to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC m....
Check Stock

Dorman 610-558 9/16-18 Serrated Wheel Stud - .65 In. Knurl, 2.5 In. Length Compatible with Select Dodge / Ram Models, 10 Pack

  • COMPATIBLE WITH Toyota Tacoma Models Equipped with M12 x 1.5 Factory Studs..
  • CONTENTS: (12x) M12 x 1.5 Thread High-Strength Spec Spline Type Extended Wheel Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: M12 x 1.5 Thread / 0.561" Knurl / 0.333" Shoulder / 2.374" Length. *Front or Rear fitment. Two sets need to be purchased to replace studs on all 4 wheels. Please verify fitment compatibility prior to ordering..
  • BENEFITS: High-Grade 3/4" longer than factory studs designed to facilitate proper installation of aftermarket wheels & tires and/or wheel spacers..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage..
Check Stock

Supreme Suspensions - Extended Wheel Studs Kit for Toyota, Scion and Lexus IS300 with M12X1.5 Studs 3/4\ Longer Than Stock Wheel Studs (24PC PRO Kit)

  • COMPATIBLE WITH TOYOTA, SCION and LEXUS IS300 Models Equipped with M12 x 1.5 Factory Studs. *Does NOT Fit 2007+ Toyota Tundra..
  • CONTENTS: (24x) M12 x 1.5 Thread High-Strength Spec Spline Type Extended Wheel Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: M12 x 1.5 Thread / 0.561" Knurl / 0.333" Shoulder / 2.374" Length. *Please verify fitment compatibility prior to ordering..
  • BENEFITS: High-Grade 3/4" longer than factory studs designed to facilitate proper installation of aftermarket wheels & tires and/or wheel spacers..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage..
Check Stock

Supreme Suspensions - 4pc Set of 2 Hub Centric Wheel Spacers for 2002-2011 Dodge Ram 1500 2WD/4WD - 5x5.5 5x139.7mm BP with 9/16 x18 Studs 77.8mm Center Bore w/Lip Black

  • COMPATIBLE WITH 2002 - 2011 Dodge Ram 1500 2WD / 4WD. *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme....
  • SPECIFICATIONS: 2 Inch Thick, 5 x 139.7mm (5 x 5.5") Bolt Pattern, 9/16" x 18 Stud Size, 77.8mm Hub Centric Center Bore (Matches Vehicle Hub Diameter).
  • BENEFITS: Positions your wheels 2" outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive....
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are four Universal Tire Valve Stem Caps precision CNC machined from light-weight T6 Billet....
Check Stock

GoodsZone 10/Pack Glass Table Top Bumpers Vinyl Clear Pads Spacers for Patio Furniture Indoor Outdoor for 1/4 Inch Hole

  • ✔ 10/Pack Glass Table Top Bumpers Vinyl Clear Pads Spacers.
  • ✔ Base is 1/2” in Diameter and about 1/8” Thick.
  • ✔ Glass Top Table Bumpers with Stem Fits a 1/4” Hole.
  • ✔ Easy to apply, Great Grip, Prevents Sliding, Made in USA.
  • ✔ Original Bumpers only from the seller GoodsZone.
Check Stock

ONGHSD 9 Pieces/Set Carbon Fiber Bike Headset Spacer Kit 1/2/3/5/8/10/15/20/30mm MTB Bike Headset Rings Bicycle Headset Spacer Kit Fits for 1 1/8 Inch Road Mountain Bike Stem Spacers

  • 9 Pieces of 9 Height Size.This headset spacer kit contains 9 different height sizes: 1 mm,2 mm,3 mm,5 mm,8 mm,10 mm,15 mm,20 mm,30 mm..
  • Smooth incision edge offers high tightness.Small size spacer let you have a more precise height adjustment.You can combine them freely to meet your different needs..
  • Made of woven carbon fiber,nice appearance,lightweight and well temperature resistance..
  • Compared with aluminum alloy bike stem spacers,it’s more hard,better strength,more friction resistance and high corrosion resistance..
  • Inner diameter is approx. 28.6mm,external is 34.9mm.This headset spacer set fits for 1-1/8" bike headset stem.Universal for most bicycle,like mountain bike,road bike,MTB bike,BMX and etc..
Check Stock

Supreme Suspensions - 4pc Set of 2" Hub Centric Wheel Spacers for 2012-2018 Dodge Ram 1500 (2WD/4WD) - 5x5.5" (5x139.7mm) BP with M14x1.5 Studs 77.8mm Center Bore w/Lip (Black)

  • COMPATIBLE WITH 2012 - 2018 Dodge Ram 1500 2WD / 4WD. *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
  • SPECIFICATIONS: 2 Inch Thick, 5 x 139.7mm (5 x 5.5") Bolt Pattern, M14 x 1.5 Stud Size, 77.8mm Hub Centric Center Bore (Matches Vehicle Hub Diameter).
  • BENEFITS: Positions your wheels 2" outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are four Universal Tire Valve Stem Caps precision CNC machined from light-weight T6 Billet Aluminum with an anodized surface and rust & water-resistant polymer thread inserts to prevent corrosion & chemical damage..
Check Stock

Kbrotech Bicycle Headset Spacer Aluminium Alloy Bike Stem Headset Spacers Fork Washer Fit for 1 1/8-Inch Stem 2mm 5mm 10mm 8pieces Aluminum Alloy

  • Fit for 28.6mm front stem fork of MTB, BMX, mountain bike, road bike etc..
  • 8pieces aluminum Headset Spacers 2mmx2,5mmx3,10mmx3.Spaces Inside diameter:28.6mm.
  • Lightweight and easy to install.help to raise your handlebar..
  • Made of high-quality aluminum alloy material,CNC finished..
  • 3 different size(2mm/5mm/10mm),they could fit for your demand and meet different needs..
Check Stock