ReviewsStep Deck With Load Levelers

The Original Furniture Levelers by Clear Style Adjustable Furniture Legs, Table Levelers and Chairs Levelers, 3/8-16 Inch Thread Size, 1.57 Inch Base Dia, 2.095 Thread Length, with 4 Felt Pads(4 Pack)

✅ STOP BALANCING YOUR CHAIR AND TABLE LEGS WITH FOLDED CARDBOARD! - Our Tables and Chairs levelers are the best way to quickly and easily fixing the level of all types of furniture at Home, Office, School, Restaurant. MODERN DESIGN will have people wondering if you bought a whole new furniture set. PLEASE NOTE 2.95IN IN OPEN MODE.
✅ EASY INSTALLATION & FITS TO ALL FURNITURES Why buying new table or chair from the shop when you can use our Clear Style levelers pads to renew your furniture’s at home.our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced..
✅ STRONG & STURDY COMMERCIAL QUALITY - These furniture levelers are the strongest on the market and 100% guaranteed to resist and bending or flexing under load. Made of 100% Solid Steel and Thick High-Density nylon base. Sturdy 1.57” base Diameter and Fully adjustable 2.95” thread for maximum support and adjustability..
✅ NOT ONLY FOR FURNITURES – Our levelers can ne use in any application where you want to balance up, from Garage tables to garden benches etc’, ORDER NOW Clear Style levelers to fix your balancing problems and ENJOY high quality of products.
✅ 100% MONEY BACK GUARANTEE NO QUESTIONS ASKED - Our custome....

Check Stock

BOYISEN Camper Levelers 2 Pack – RV Leveling System Ramp Kit, Improved Non-Slip Design, Support Two Axles, Up to 35,000lbs, RV Leveler for Travel Trailer Faster & Easier Than Camper Leveling Blocks

IMPROVED ANTI-SLIP SYSTEM – BOYISEN RV Levelers not only add anti-slip lines on curved levelers and chocks surface to enhance friction, we also add anti-slip jointing system for better fitting, with anti-slip mats, our Camper leveling system will stay solid still while backing your campers or trailers.
SUITABLE FOR DUAL AXLES NO TRIM NEEDED – BOYISEN RV wheel levelers improved its construction, make it fits two axles without trimming. The length is shorter than others, but the construction is improved so as to support vehicles up to 35,000lbs, level increment is 1/2 inch up to 4 inches, support wheel up to 32” diameters.
FAST & PRECISE LEVELING – Compare to RV leveling blocks by move your camper or trailer back and forth, using BOYISEN RV leveler and block kit, just simply drive your vehicle on the curved leveler till level, choke and done. Avoid the hassle of piling blocks or blanks, not to mention worrying blanks may flying out to hurt somebody.
PORTABLE & COMPACT – BOYISEN Leveler comes in a storage bag. We provide a customized storage bag with handle to store and carry them, much easier for storage than leveling blocks. A better option for campers and travel trailers, save your trouble from a uneven camping terrain.

Check Stock

Vinyl Works AF Adjustable 24 Inch Gated Entry Above Ground Pool Ladder, White

Step-in pool ladder with double handrails for easy, safe entry and exit into an above-ground pool.
Designed and intended for use with an above ground pool with up to 4.5-foot side walls and a flat bottom.
2 deck mount flanges for greater stability offering a 300-pound load capacity for one user at a time.
Top-step platform adjusts from 48 to 56 inches tall to pass over pool walls.
Latching gate securely closes and locks when pool isn't in use to prevent unwanted entry & injury.

Check Stock

TOVOT 8 Pcs Screw On Furniture Adjustable Legs Leveling Glides Foot Adjuster Leveler M10 x 58mm(Threads Dia x Base Dia)

Set of 12 - 3/8" Leg Levelers 13 threads.
Easy to install. Drill a 3/8" hole,protect chair,table and other furniture legs.
Dimension: Total length: 2.36" (60 mm), screw length: 13/16" (20 mm), thread size: M10 * 13/16"(20 mm), base diameter: 1-7/8" (58 mm).
Set of four levelers has a load capacity of 440 lbs.

Check Stock

JoyMall Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table, Cabinets, Workbench,Shelving Units and More - 2000 Lb,4 Pack

Multi-UseIdeal for shelving units,table, cabinets, furniture legs and a whole lot more..
Solid & Heavy DutyL-shaped mounting bracket made from a heavy gauge. Plated steel that hook onto the bottom edge of you cabinet for better support and stability unlike standard levelers.Heavy Duty Leg Levelers..
AdjustableAdjustable legs allows you to adjusts from 0" to 2" in height. Provideing a load capacity of approximately 600 lbs by using all four levelers.
Protect FloorFeet cover will protect your floor and block any moisture from getting to the feet. No more rust spots left on the floor surface. Lucent feet cover for future change and longer use..
YOU GET - 4 Legs, 16 Installation screws (#10 x 1 1/8"), 5mm hex wrench.

Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Adjustable Furniture Table Chairs Levelers with Nut- 1.96\ Dia Base,5/16-37 Thread Size,1.96\ Thread Length for Furniture

Adjustable Furniture Glides made of metal and nylon ,with thickened flat bottom base, increase the overall force surface, and increase the load capacity.
Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
Swivel Furniture Leg Levelers Dimension: Total length: 3.14" (80 mm), screw length: 1.96" (50 mm), thread size: M8 * 1.96"(50 mm)-5/16“-37 thread, base diameter: 1.96" (50 mm).
Easy to install:Drill a 5/16" hole , 3.14" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.

Check Stock

TOVOT 4 PCS of Adjustable Furniture Leg Leveling Glides/Screw On Adjustable Furniture Table Chairs Levelers with Nut- 1.57\ Dia Base,5/16-60 Thread Size,3.14\ Thread Length for Furniture

Adjustable Furniture Glides made of metal and nylon ,with thickened flat bottom base, increase the overall force surface, and increase the load capacity.
Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
Swivel Furniture Leg Levelers Dimension:Total length: 4.33" (110 mm), screw length: 3.14" (80 mm), thread size: M8 * 3.14"(80 mm)-5/16“-60 thread, base diameter: 1.57" (40 mm).
Easy to install:Drill a 5/16" hole , 3.14" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.

Check Stock

24 PCS M8 Screw On Furniture Glide Leveling Foot Adjustable Diameter 1 inch / 25 mm for Furniture Legs

Set of 24 – 3/8″ Leg Levelers -9 threads.
Easy to install. Drill a 5/16″ hole,protect chair,table and other furniture legs.
Set of four levelers has a load capacity of 800 lbs,Used for furniture ,chair,table,enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Material:Plastic ,metal Color: Black,Sliver.
Dimension: Total length: 13/16″ (21 mm), Screw length: 2/4″ (13 mm), thread size: M8 * 2/4″(13 mm), base diameter: 1″ (25 mm).

Check Stock

Skateboards 2 Scrapers

[Featuring a spacious deck and double kick-tails]: this type of skateboard provides excellent control for accelerating and braking, especially suitable for players who need to learn basic skills or further improve riding tricks, which should be the first step to reach the paramount..
[Sturdy Deck Board made of 7 layers of maple wood]:We adapted Canadian maple wood to craft this skateboard of which the deck of this product is made of 7 layers of maple wood . extra-strong and highly-resilient and durable to withstand heavy impact at ease.And the load capacity of entire skateboard is up to 220lbs, perfectly meeting the needs of most occasions..
[Ideal for Different-Level Players]:Can meet the needs of players of different levels for Professionals, Amateurs or Beginners.
[Easy to Ride and No Assembly Required]：The whole skateboard is light-weight and previously assembled. No matter it’s professional fancy moves such as valid Heel-flip, Nose-slide, Feeble or basic ones like Ollie and Fakie, you could finish them smooth and gracefully..
[Quality Assurance]：We promise 100% quality....

Check Stock

Seimneire 4pcs Swivel Furniture Leg Levelers, Adjustable Leveling Feet Glide for Tables Chairs Cabinets Workbench Shelving Rack - 1.9

*What You Will Get --- 4 x Swivel furniture leg levelers, 4 x T-Nut. Whatever your home or workplace needs assistance making leveled, our furniture leg levelers are a quick fix while not compromising the look!.
*Quality Assurance --- Made of a high-quality black nylon base and nickel-plated carbon steel threaded socket. Each leveling feet features a wide heavy base and has a total load capacity of 800 lbs making it suitable for a wide range of purposes and withstand durability for years.
*Designed for Versatility --- When installed, it allows you to adjust the height from 1.36" to 5" and angle from 90 to 70 from the floor. Its swiveling base with excellent anti-slip performance wobbling on the uneven floor and reduces vibration. This gives you absolute peace of mind you deserve in your home.
*Multiple Applications --- Our swivel adjustable furniture leg levelers can be applied to tables, chairs, shelving units, kitchen cabinets, plant stands, workbenches, and so much more. Suitable for used in many scenarios that commonly found in homes, kitchens, garages, workshops, offices, restaurants, shops, and etc.
*Worry-Free Warranty ---- Seimneire provides a 100% money-back 30-day guarantee and 24hrs customer service. If you are not satisfied or have any questio....

Check Stock

Plastic Shims,Furniture Levelers,81 PC,Strong and Durable DIY Waterproof Rubber Feet Have Extreme Weight Capacity - Ideal Table Shims Non Slip for Furniture, Table, Chair, Cabinet,Table Leg,Toilet …

Versatile Tool:Our furniture levelers can instantly stabilizing wobbly tables, furniture, appliances, shelves, desks, in restaurants, at home, in the garage, on patios, at the office, in schools, hospitals and more…Stop the table tilting with wobble fixer..
Saving you Time and Energy: Rubber feet outperforms wedges with a steady solid support. No stacking, cutting, trimming, or tools required.It is sturdy enough to last a lifetime and flexible enough to protect delicate surfaces & bend without breaking.The soft and leveled furniture feet can be used for curved and uneven surfaces as well and can hold up to 22,000 pounds of weight without collapsing..
DIY Table Shims: Table levelers can be stacked together to create a higher wedge if necessary. You can use it for furniture levelers/ silicone protect pads / door stop / wood floor / ceramic tile / door frame and so on..
Tough and Durable: Will not rot, swell, warp or give way even in tough outdoor conditions.The functional design and durable material of the table stabilizers make it suitable for unlimited purposes. Use the mini wedge for leveling furniture, tables, windows, cabinets, deck, sheds, mailbox, etc..
How it Works: Easy to install / fills the gap between the floor and the table leg.Automatically....

Check Stock