ReviewsStep Drill Bit

BOSCH IMSDC002 2 pc High-Speed Steel Impact Tough Turbo Step Drill Bit Set

  • Cordless step drill bit design – made for smooth drilling in cordless drills using high-speed and low-speed mode, with 2X cutting edges and optimized angles on the bit steps.
  • Hex shank impact-ready step drill bit – optimized for impact drivers, and the bits are drill/driver compatible.
  • 2X cutting edges – provides 2X faster cutting through tough material, with two sharp edges.
  • 2X longer life and clean holes – designed for burr-free holes, these bits help manage heat for longer bit life.
  • 2X holes per charge – features efficient operation to boost user productivity.
Check Stock

Titanium Step Drill Bit Set Unibit Drill Bits Unibits Set Uni Bit Step Bit Sets Stepped Drill Bits For Sheet Metal Hole Cutter Plastic Plexiglass Acrylic Impact Driver Unabit Up Stepper Cone Hex Shank

  • SET INCLUDES: (3) Titanium Step Drill Bits (Hex Shank), (1) Locking Quick Change Bit Holder Drill Adapter (Hex Drive), (1) Fabric Case.
  • The Step Bits in The Unibit Set All Have Quick Change 1/4” Hex Shanks (COMPATIBLE WITH DRILLS & IMPACT DRIVERS).
  • The Included Hex Drive QUICK CHANGE BIT HOLDER ADAPTER Lets You Easily Change Bits in Your Drill (it Fits The Unibits, Along With ANY Type of Hex Bit!).
  • Great For Drilling MULTIPLE SIZE HOLES in Thin Metal, Sheet Metal, Plastic, Plexiglass, Acrylic, Lexan, Plywood, PVC Pipe, Conduit, Polycarbonate, Fiberglass, And Much More!.
  • Step Drill Bit Sizes: 1/8” | 5/32” | 3/16” | 7/32” | 1/4” | 9/32” | 5/16” | 11/32” | 3/8” | 13/32” | 7/16” | 15/32” | 1/2” | 9/16” | 5/8” | 11/16” | 3/4”.
Check Stock

Rocaris 39 Pack Woodworking Chamfer Drilling Tools, Including Countersink Drill Bits, L-Wrench, Wood Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool

  • 39 Pack Woodworking Chamfer Drilling Tool Kit Include Including Countersink Drill Bits, L-Wrench, Wood Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool. Pecfect gift for fathers, friends, carpenter and DIY lovers..
  • 7Pcs Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 3 Pcs 1/4" Hex Shank HSS Step Drill Bit Set – Great heat/ corrosion/ rust resistance with titanium coating. Specification: 4-12mm / 4-20mm / 4-32mm. Suitable for drilling holes in Iron Plate, Copper Plate, Aluminum Plate, Wood, PVC sheet, Insulation Boards. Not recommend for hard and br....
Check Stock

NEIKO 10169A Step Drill Bit Set and Automatic Center Punch | 5 Piece, 41 SAE Sizes Total, 1/8” – 1-3/8” | Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits

  • HSS COBALT STEP BIT: Classic stepdrill bit constructed of high-speed steel with titanium coating for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • SPRING LOADED CENTER PUNCH: Our 5-inch automatic spring punch tool is a great tool for working with materials like wood, plastic, metal, and leather. Centering tool is spring loaded with an adjustable cap that accommodates any project..
  • INCLUDES: Four multipurpose dill bit in 1/4-inch shank and 3/8-inch shank with automotive center punch and a red blow mold carrying case for easy convince and storage..
  • MULTIPLE HOLE DRILL BIT: 4 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

Makita A-97748 1/8\ Black Oxide Drill Bit, 1/4\ Hex Shank

  • [Specifications and packaging]: 33 Piece hex shank twist drill bit set.Plastic case..
  • [Fitment]: Wood drill bit set for metal/wood/plastic sink. Suitable for home DIY, and general building/engineering use..
  • [Material]: Impact drill bits use classic high speed steel construction with titanium coating for capability and durability..
  • [Advantage]: Hex shank twist drill bit set drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • [Quick Replacement, Safe Installation]: Titanium drill bit fits into all power tools more easily and securely, specially for locking into quick change chuck. We also offer a quick-change adapter to better quick change..
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

NEIKO 10173A Step Drill Bit Set for Metal and Wood, 5 Piece SAE, Spiral Grooved for Faster Drilling, Step Bits with 50 Total Step Sizes, Titanium Coated Unibits

  • PREMIUM STEP BIT: Each unibit is constructed of industrial high-speed steel with a titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel, and other types of sheet metal..
  • STEP DRILL BIT FOR METAL: With a split point tip that accelerates cutting speed while preventing angled walking away from center line of bore, drilling holes in metal is fast, efficient, and clean..
  • SPIRAL DESIGN: The two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting. With 50 step sizes combined, each hole made with these step bits will be precise..
  • QUICK-CHANGE: The 1/4-inch hex shank makes for easy, convenient, and quick stepper bit switches and is compatible with impact ready power tools..
  • INCLUDES: Each bit set comes with 5 drill bits of a combined 50 sizes: Range is from 1/8” to 1-3/8”..
Check Stock

Preamer 6-60mm HSS 4241 Large Spiral Groove Metric Step Drill Set Cone Drill Bit Woodworking Metal Hole Cutter Tool Drilling Bit

  • The drills twice as fast as the average step drills and can drill acrylic, PVC, wood, aluminum and iron sheets up to 0.2’’ in thickness. Our drill bit is bigger in size so it can drill holes with larger dimensions.ture.
  • cutting blade design makes for cutting faster,automatic deburring from hole when drilling..
  • Ideal For DIY, Home and General Building/Engineering Using..
  • The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The coating makes the drill bit more durable so that it can last for years with uncompromised quality..
  • 6-60mm(12 steps:6,10,15,20,25,30,35,40,45,50,55,60mm)Shank Diameter: 13mm.Material: HSS 4241.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

Matework M35 Cobalt Step Drill Bit Four Spiral Flute Step Bit 1/4 -1-3/8 Wear-Resistant TiAlN Coated 3/8 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 19 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock