ReviewsStepper Motor Arduino With Driver

Twotrees Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version

【1】Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire..
【2】Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on..
【3】Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current..
【4】The largest 32 divisions of the 6 models are optional.
Suitable for 4 wires, 6 wires and 8 wires stepper motor..
【5】Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion..

A, B, C, D four-phase LED indicates the status of the stepper motor work..
Stepper motor with a standard interface, when used directly pluggable..
The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
Drive Module Board Size(in): 1.37*1.18*0.6.
Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..

Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32....
Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..

★The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough..
★Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step..
★Simple step and direction control interface..

... ✨On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque. spreadCycle allow for highly dynamic motion. Drive current 2A, peak current 2.8A, voltage range 4.75V-29V, 256 subdivision..

Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
A, B, C, D four-phase LED indicates the status of stepper motor work.
Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
Gift: 1x 10-pin male to female multicolor breadboard jumper wires，each cable length: 7.87"(20 cm).
Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.

♞【Product】3 Axis nema23 stepper motor driver controller kit.
♞【Application】This cnc kit are widely used in engraving machine, printer,....
♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
♞【Driver】CW5045 driver Voltage: DC 24-50V.
Current: rated maximum output reaches: ±4.5A.
♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
♞【Power supply】400W,36V/9.7A switching power supply.

Package included: 1 x Stepper Motor Driver..
✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
✿The largest 32 subdivision of the 6 models are optional.
Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper....
✿Protect form✿: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage....
✿Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines,....

Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
Terminal driver part of the supply area VMS: +5V ~ +35V.
Drive part of the peak current Io: 2A / Bridge.
Logical part of the terminal power supply range Vss :4.5-5 .5V.
Logical part of the operating current range: 0 ~ 36mA.
The control signal input voltage range: 4.5-5.5V low 0V high.
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..