ReviewsStepper Motor Driver For 3d Printer

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

HICTOP Al13-310 3D Printer with Linear Guide Rail on All Axis Auto Leveling Filament Sensor Metal Large Print Size 300*300*290mm

  • 1. There is a linear guide rail and a screw rod in each axis of the HICTOP Al13-310 3D printer which can greatly improve the printing accuracy..
  • 2.One X axis, double Y axis, and double Z axis of this metal 3d printer are exactly the same with each other if any axis is damaged, it can be replaced directly, which improves the convenience of maintenance..
  • 3. Al13-310 3D printer supports high-speed printing of 300mm/s, we suggest you to print at normal speed for the first layer and add the speed to 300mm/s after the first layer finishes. Special PLA for fast speed 3D printer prints better and normal PLA can also print very well..
  • 4. This printer is reallly easy to use for beginners as leveling the bed is supper easy, you can auto level or manual level the bed and changing the Z offset and no need to roll the wheels under the bed..
  • 5. 32-bit silent motherboard and TMC2209 stepper driver effectively reduce working noise,it is about 55 decibel when printing, not exclusive ultra-quiet but still quite quiet for printer with this structure..
Check Stock

Stepper Motor HAT Drives Two Stepper Motors Up to 1/32 Microstepping for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B for Use 3D Printer etc @XYGStudy

  • This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping..
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions, Jetson Nano.
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Applications: 3D Printer, Sculpturing machine, Mechanical arm.
Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

  • Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.
Check Stock

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length:9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

3D Printer,Snapmaker Upgraded 3-in-1 3D Printer with 3D Printing Laser Engraving CNC Carving(A350T)

  • ...s offers a larger work area of 320*350*330mm, which is capable of making much bigger prints or multiple smaller objects in one go..
  • Noise Reduction Chip&Smart Auto Leveling: With the new A350T Linear Modules, the noise gets reduced substantially, thanks to the TMC 2209 stepper motor driver chips embedded. Snapmaker 3D printers offers an induction sensor can probe the bed in a grid and apply mesh-based compensation that ensures you print on a level bed every time, all without complicated operations by yourself..
  • Filament Runout Recovery&Power Loss Recovery: A350T 3D printers can automatically detect power loss, and then resumes exactly where it left off. You can recover any project and get perfect results all the time, don't worry about power outages anymore. Equipped with a filament runout sensor, A350T Smart 3D printers will remind you when the filament has run out. You can now print large objects without fear..
  • Higher Precision&Modular Design: All modules and major components are made of high-strength metal. Snapmaker 3D printers take pride in high accuracy and durability, which makes possible the hi....
Check Stock

MINARIK MM23001C 0-90/0-180V-DC 1/4-2HP 5A AMP DC MOTOR DRIVE D506404

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional..
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

FOKOOS 3D Printer Odin-5 F3 Foldable 99% Pre-Assembled Direct Drive Work with TPU/PLA Dual Z-axis 0.1mm High Precision 150mm/s Print Speed Touchscreen Open Source 235x235x250mm

  • [Unique Foldable Design]: Easy to carry outside. 99% Pre-Assembled, finish the installation in 3 minutes, just need 4 screws to fix the 3d printer, and insert two cables..
  • [Direct Drive]: Work well with TPU, PLA+, PETG filament. Integrated extruder, not easy clogging of nozzles, easy filament change, and smart filament break detection..
  • [High precision and stability]: Dual Z-axis and Y-axis design, with sheet metal case and frame, large bottom space, good heat dissipation, printing more stable, extending the life of the 3d printer..
  • [Quiet and open source]: With the TMC2208 quiet Stepper Motor Driver module and powerful STM32 control chip. Users are allowed to customize their 3d printers by adding modules such as Bltouch, Wifi, based on the source code and share these experiences within the community..
  • [Lifetime technical support]: Contact our after-sales team to get effective and professional help in solving your issues at any time..
Check Stock