ReviewsStm32f103ze Board

BIGTREETECH Direct Octopus V1.1 Silent 32 Bit Control Board 3D + TFT35 E3 V3.0 Two Mode Display Screen 3D Printer Parts for Creality Ender 3/5 CR10

【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to....
【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U....
【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard.....

Check Stock

67MM Variable Neutral Density Slim Filter – ND ND2 to ND400 Filter for Canon, Nikon, Sony, Sigma, Fujifilm, Fuji, FUJINON, Tamron, Carl Zeiss Lens

...0 Makro-Planar ZE Macro, 135mm f/2 Apo Sonnar T* ZE for Canon EF Mount SLRs, Milvus 100mm f/2M, 50mm f/2M, 50mm f/1.4 ZE Lens – Sony 28-75mm f/2.8 Alpha A-Mount Standard Zoom Lens.
Canon EF 100mm f/2.8L Macro IS USM, 70-200mm f/4L IS USM, 35mm f/2 IS USM, 70-300mm f/4-5.6L IS USM Lens – EF-S 10-18mm f/4.5-5.6 IS STM, 17-85mm f/4-5.6 IS USM, 18-135mm f/3.5-5.6 IS USM, 17-85mm f/4-5.6 IS USM, 18-135mm f/3.5-5.6 IS STM, 18-135mm f/3.5-5.6 IS Lens.
Nikon AF-S NIKKOR 200-400mm f/4G ED VR II, AF-S DX NIKKOR 16-85mm f/3.5-5.6G ED VR, 18-105mm f/3.5-5.6G ED VR , 28mm f/1.8G, 18-140mm f/3.5-5.6G ED VR, 35mm f/1.4G, 85mm f/1.8G, VR Zoom-NIKKOR 70-300mm f/4.5-5.6G IF-ED, 70-200mm f/4G ED VR, 8-300mm f/3.5-6.3G ED VR Lens.
SONY E-mount: Sony SEL18200 E-mount 18-200mm F3.5-6.3 OSS, E PZ 18-200mm f/3.5-6.3 OSS, Vario-Tessar T* FE 24-70mm f/4 ZA OSS, Zeiss Touit 12mm f/2.8, Batis 25mm f/2, 85mm f/1.8 Lens NEX Alpha E-mount Lens.

Check Stock

Creality 48CM TF to Micro SD TF Extension Cable Memory Card Adapter for/Raspberry Pi/Arduino GPS TV SDXC Creality CR10/10S/S4/S5/Ender 3/Ender 3 Pro Monoprice Select Mini 3D Printer

【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to....
【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U....
【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard.....

Check Stock

Prg-108 GQ-4X V4 (GQ-4X4) Programmer + ADP-019 PSOP44 Adapter V2

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families.
The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software..
STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments..

Check Stock

BIGTREETECH SKR PICO V1.0 Control Board: Mini Controller Board with TMC2209 UART Stepper Motor and Raspberry Pi Online Printing for Voron V0 V0.1 3D Printer Parts

【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V..
【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing..
【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion.
at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer..
【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port..

Check Stock

1.3 Inch IPS TFT LCD Display Module 240x240 ST7789 SPI Interface for Arduino STM ESP8266 (with pin Header)

The color level is displayed to make the TFT LCD color more realistic, the brightness is good, the contrast is high, the layering is strong and the color is bright..
Driver ST7789,sorpport 4-line SPI, save IO interface, especially suitable for arduino、ESP8266.
High resolution, application on mini WIFI TV、WIFI Internet weather clock、Smart wear、IOT etc..
you can contact us for reference schematic diagrams and PCB source files, STM32 and TKM32F499 reference programs and other related materials.

Check Stock

Waveshare OpenH743I-C Package B with 7inch Capacitive Touch LCD (F) The STM32 Development Board Designed for The STM32H743IIT6 Microcontroller

OpenH743I-C is an STM32 development board designed for the STM32H743IIT6 microcontroller, consists of the mother board and the MCU core board CoreH743I..
The OpenH743I-C supports further expansion with various optional accessory boards for specific application..
The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers..
The OpenH743I-C does NOT integrate any debugging function, a debugger is required..

Check Stock

GoolRC Radiolink Byme-D Flight Stabiliser Flight Controller Gyroscope Self-Stabilization Balance for RC Airplane Fixed Wing Delta Wing Paper Plane SU27 F22

Product Name: Matek F411-WTE Flight Controller，STM32F411CEU6 OSD 2-6S Lipo.
IMU: BMI270, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial.
2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power).
Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g.
INAV Target: MATEKF411TE ( INAV4.1 or newer).

Check Stock

STLINK-V3SET Microcontrollers ST STM8 and STM32 MCU USB Swim JTAG SWD Modular Stand-Alone in-Circuit Debugger Programmer SPI I2C CAN GPIOs @XYG

The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and....
The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board..
The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and....
The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board..

Check Stock

Matek Systems F411-WTE 100MHz STM32F411CEU6 Flight Controller Built-in OSD 2-6S for RC Airplane Fixed Wing DIY Accessories Parts …

Product Name: Matek F411-WTE Flight Controller，STM32F411CEU6 OSD 2-6S Lipo.
IMU: BMI270, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial.
2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power).
Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g.
INAV Target: MATEKF411TE ( INAV4.1 or newer).

Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..

Check Stock