ReviewsStone Cnc Cutting Machine

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Orange)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock

SCULPFUN S10 Laser Module with Air Assist Nozzle, 10W Optical Power, 20mm Wood 15mm Acrylic Cutting, Faster & Stronger Laser Cutter, Ultra-Fine Compressed Spot, Compatible with Laser Engraving Machine

  • ...le is different because it has an advanced hydrodynamic design that allows for better utilize of air pressure. S10 has a faster jet stream when using the same air assist. For example, when using a 30L/min, 0.03Mpa air assist, the S10 nozzle will eject a high speed airflow of up to 14.5m/s. This will greatly improve cutting penetration and cutting efficiency. (AIR ASSIST NOT INCLUDED, NEED TO BUY SEPARATELY).
  • Faster, Stronger and Cleaner: Combining advanced high-speed air assist and 10W high energy density laser, S10 embodies wood cutting performance comparable to industrial grade: First, cutting efficiency is greatly improved, cutting faster.
  • Second, cutting penetration is stronger, which can cut many high-density wood.
  • Third, cutting surface is cleaner, powerful airflow blows away the residue, leaving the surface of cut objects without any stain..
  • 0.06mm Ultra-Fine Compressed Spot: S10 adopts ultra-fine high energy 10W laser beam shaping technology, 0.06*0.06mm compressed spot enables finer laser engraving. S10 can cut 10mm wood, 5mm acrylic at one pass.
  • Cut 10mm walnut and 6mm MDF and other high density materials.
  • Carving metal, glass, stone, etc. Which means S10 has higher energy density, stronger cutting penetration and engraving capabilities..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • ...ine power and 10W output power, 0.08*0.08mm compressed spot enabling finer laser engraving. The laser module engraves 304 stainless steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving module kit protective lens can have no fingerprints, it will affect the cut....
Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

  • Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
  • Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
  • Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
  • Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
  • Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
  • Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

Baoblaze CNC Spoilboard Surfacing Router Bit 1/4 inch Shank Carbide Tipped Surface Planing Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter 6.35mm shank

  • This professional "CNC Spoilboard Surfacing Router Bit" is not slab flattening, or plane the top surface of the spoilboard, but also for trimming and slotting/grooving..
  • 4 flutes wood cnc router, Shank: 6.35mm 12mm 12.7mm.
  • Suitable s, mdf, laminate, particle board, plywood compact panel, acrylic and etc. avoid cutting metal and non materials..
  • Use on CNC and other automatic routers as well as hand-held and mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock