ReviewsStone Processing Machinery

uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block Flange Bearing, Zinc (Pack of 4)

  • SIZE:KFL08 8mm Bore Diameter, Pillow Block Bearing Flange.
  • FEATURES:This Bearing is a self-aligning, pillow block bearing.
  • MATERIAL: Zinc Alloy Flanged Base, rust-proof, durable, have long Life.
  • APPLICATION:Pillow Block Bearing Flange Block Bearing is widely used in various of machinery.
  • NOTE:Can be used in transportation, transmission system, feeding systems, processing system, processing machinery.
Check Stock

Cnloyua Drag Chain, Low Noise Cable Chain, 1m (10mm x 20mm) Black Nylon Chain, Used for 3D Printer, CNC and Other Machines

  • ★ Material Upgrade: Using brand new nylon material, it has no unpleasant odor compared to old recycled materials, has good compressive and high temperature resistance, high wear resistance, and can improve durability better..
  • ★ Easy to install: The length can be adjusted freely, the drag chain can be disassembled into shorter parts, or multiple drag chains can be combined into a longer drag chain, installation and maintenance are more convenient..
  • ★ Reuse: The solid clamp design is more solid, the clamp is not easy to fall off and break after repeated use, and the use is safer..
  • ★ Protection: It can not only protect the cable well, extend the life of the cable, but also make the whole 3D printer more tidy..
  • ★ Has many uses: Wide range of uses. This nylon cable chain is very suitable for 3D printers, CNC machine tools, robotic arms, stone processing machinery, lifting and conveying equipment..
Check Stock

uxcell R28 15mm x 30mm Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • External Size: 20x38mm(0.787x1.496 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R18 10mm x 20mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC

  • Internal Size: 10x20mm(0.394x0.787 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

10mm x 10mm Length 1M Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 for 3D Printer and CNC Machines

  • The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • You can link the cables with each other to form one long length you need.
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance.
  • Suitable for reciprocating motion in occasions, with built-in cables, pipes, water pipes, etc.
  • The Drag chain has been widely used in CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc.
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW)；Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Sunhokey 15x40mm 1-Meter Black Plastic Flexible Drag Chain Cable Wire Carrier Nested Semi Colsed Twist Chains for 3D Printer and CNC Machines (Inside Open) (15x40mm)

  • Easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance..
  • Drag chains can be linked with each other to form one longer length you need..
  • Widely used for 3D Printers, CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc..
Check Stock