ReviewsStraight Edge For Woodworking

POWERTEC 71332 38 Anodized Aluminum Straight Edge | Metal Straight Edge Machined Flat to Within 0.003” Over Full 38” - Professional Finishing Tools

  • FUNCTION: A cost effective alternative to determining table surface flatness, engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers and various others.
  • FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized.
  • ALUMINUM CONSTRUCTION: This heavy duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion.
  • VERSATILE: Can be used as a straight edge guide for machines, drafting tool, drawing bar, or even to check cylinder head distortion - the possibilities are endless.
  • SCALE: Straight edge ruler measures out to 38 inches long, 2 inches wide, with a 5/16” measuring surface width, and is equipped with a dual sided metric and standard ruler measurement system.
Check Stock

TWOZOZO Woodworking Edge Ruler, Precision Woodworking Tools Ruler with Adjustable Protractor Angle Finder, Stainless Steel Carpenter Mark Rule（20 Inch）

  • MULTI-ANGLE USE : Our woodworking measuring tools come with a protractor to measure both length and angle. The woodworker adjusts the angle from 0° to 70° according to the use, and draws the line in the desired position precisely. The ruler is simple and easy to operate, a good helper for you.
  • CLEAR AND LEGIBLE SCALES: T square ruler is laser precision engraved. It has permanent dark markings and white scales for maximum readability in any light.
  • DURABLE MATERIALS: The dial of the woodworking edge ruler is made of plastic ABS, and the goniometer and body are made of stainless steel, which is resistant to moisture, rust and corrosion. The measuring tape is perfect for carpenters, designers, architects, mechanics, engineers, etc.
  • EASY TO HANDLE: You can put the cross side of the disc close to the edge of the board and turn the ruler to get the angle you want, draw a straight or diagonal line. The pencil tip is placed in the notch of the serrated groove and moved along the board to facilitate your measurement.
  • WOODWORKING RULER PLACEMENT: The carpenter's ruler comes with a wall....
Check Stock

Bora Jigsaw Guide For WTX or NGX Clamp Edge Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009

  • Made for jigsaws - this jigsaw guide is specifically designed to fit most jigsaws.
  • Easy to use - the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts.
  • Solid design - With two "tongue and groove" Points that slide into the Bora clamp Edge's side grooves, it's a firm, steady guide for your Jigsaw.
  • Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw. Adjustable pointer guide keeps cuts true.
  • An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw.
Check Stock

KAKURI Wood Marking Gauge Woodworking Tool 4.75" / 120mm, Japanese Wood Scribe Tool KEBIKI Carpentry Wood Scriber, Made in JAPAN

  • WOODWORKING MARKING GAUGE METRIC SCALE: It is Japanese woodworking marking scriber called SUJI KEBIKI. You can draw a parallel line with a certain width from the edge of the wood. The width is easily adjustable. It is a Japanese professional carpenter tool..
  • PRECISE WOOD MARKING DEVISE: Determine the width to draw the line and fix the jig with screws that can be turned by hand. Then, you can mark an accurate and beautiful straight line just by moving this tool. An easy-to-use lightweight tool. Please refer to the bottom of this page for using instruction..
  • STORABLE CUTTING EDGE: The blade can be stored in the wooden body when not in use. It is a safe carpentry tool. Convenient to carry and store..
  • JAPANESE WOODWORKING TOOLS: The wooden body is made of natural bamboo that fits comfortably in your hand. It is also lightweight and easy to handle. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese craftsmen..
  • PRODUCT SPECIFICATIONS: Made in Japan / Size: 5.3×2.3×7.2 inches / Weight: 4.2 oz / Maximum width: 120 mm / Blade: Japanese carbon steel / Body: Nat....
Check Stock

Wood Chisel Tool Set, 12pcs Woodworking Chisels Wood Carving Tools Trimming Down Wood Woodworking Lathe Gouges Tools with Roll-Up Carrying Case for Carpenter Craftsman,6mm (1/4\), 12mm (1/2\)

  • 【Sharp Edge,High Hardness】The blades of the woodworking chisels are made with hardened steel, sharp edge, high hardness. No burs or defects, which means that they would be stronger and rush resistant..
  • 【Easy to Use】The chisel handles are made of beech wood, and tighten with a stainless steel hoop, in order to provide you with the most comfortable and the strongest grip. The lightweight handle in combination with the sharp bevel edge allow you to have optimal control of the carving chisels and carve any wood effortlessly and with high precision. This design will help to bear more impact, and have a longer service life..
  • 【Convenient to Carry】Top grade plastic case packaging, suitable for storage and gift delivery. Packaging keeps the chisels separate so they don't hang on each other in transit.Each chisel has a black plastic edge guard to protect the tips from damage and to protect everything else in your toolbox from getting nicked or scratched..
  • 【Necessary Accessories】The whole set includes 1/2" wood chisel,1/4" wood chisel,1/4" round nose chisel,1/4" square wood chisel,1/4" skew wood chisel,1/4" diamond point chisel,1/4" curved chisel,1/4" "U" gouge,1/2" wood turning gouge,1/2" straight gouge,9/6" straight gouge,1/2" parting tool..
Check Stock

Hi-Tech Diamond 4"/5" Lapidary Trim Saw | Cutting Sawing Trimming Machine | Includes 4" AND 5" Saw Blades

  • 【Material】The saw blades uses SK5 high carbon steel, and the saw teeth are processed by high frequency quenching machine, and the hardness can reach HRC60-63 degrees..
  • 【High Working Efficiency】High carbon steel blade is extremely flexible to permit access to tight places, cutting on the pull-stroke to eliminate buckling..
  • 【Clean Cut Environment】Our woodworking flush cut trim saw takes triple-edge tooth, bringing you a clean cut environment and less sawdust after using..
  • 【Basic Information】Our woodworking flush cut trim saw overall length is 300mm/11.8in, saw blades length is approx.160mm / 6.3in, thickness is approx.0.6mm / 0.02in..
  • 【Straight Shank Petty Saw】Our woodworking flush cut trim saw is petty, lightweight, suitable for fine cutting..
Check Stock

Wood Carving Tools QJIUBA 8 in 1 Wood Carving Kit with Hook Knife, Sloyd Knife, Detail Knife, Chip Carving Knife and 4pcs Detail Wood Carving Knives with Anti-Slip Cut-Resistant Gloves for Sculpture

  • .... Also, it's already sharpened and can be used immediately when you get, no need further sharpening..
  • Durable Handle - These chisel handles are made of durable wood with a stainless steel hoop on the top to tighten it. The handle can bear impact, easy for you to hand the chisel, which would be a great helper in your woodworking time..
  • Widely Usage - Our woodworking tools kits great for beginners whether it's kids or adults, we know that wood carving is not just a hobby, but a passion that can last a lifetime, with our tools to use in kinds of wood carving and woodwork..
  • Ideal Gift - Our full size wood carving tools set is suitable as a gift for your friends and relatives who love woodworking projects. It's widely used and durable. Could be a gift for birthday, Father's Day, Christmas, etc. it's the ideal gift for professional craftsmen, DIY enthusiasts, and artists.
  • Specifications - 12 wood carving chisel with an easy carrying leather bag. Enough variety of the tips in different 12 sizes-deep gouge, medium gouge, shallow gouge, narrow straight chisel, wide straight chisel, rounded chisel, 4 angled knives / chisels, parting tool, pinpoint tool. Our full size durable woodworking sets would be helpful tools in your happy wood carving time..
Check Stock

Woodworking: The Right Technique : Three Practical Ways to Do Every Job-And How to Choose the One That's Right for You

  • 【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
  • 【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
  • 【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
  • 【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
  • 【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..
Check Stock

Kreg ACS2000 Adaptive Cutting System, Saw + Guide Track Kit

  • Premium Home Improvement Tools: The plunge saw and saw guide combine into an adaptive cutting tool.
  • Woodworking Plunge Saw: Left-bladed circular saw has a retracting blade that can start cutting anywhere on materials.
  • Straight Edge Guide: The aluminum saw guide track ensures precise, straight, and splinter-free cuts.
  • Secure Workshop Accessories: The anti-slip strips on the track saw guide secure material without clamps.
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock

RUITOOL Japanese Hand Saw 6 Inch Double Edge Sided Pull Saw Ryoba SK5 Flexible Blade 14/17 TPI Flush Cut Beech Handle Wood Saw for Woodworking Tools

  • 【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
  • 【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
  • 【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
  • 【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
  • 【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..
Check Stock

Wood Router Tool Woodworking Trimmer - 6 Variable Speed 1.25HP with 15 Pieces 1/4" Router Bits Set Electric Handheld Corded Palm Wood Router

  • Woodworking router: 1.25HP handheld palm router with 15 pieces 1/4" Router Bits Kits for beginners and professional.Powerful 33000r/min no-load speed..
  • 6 Variable Speed: Powerful speed adjustable motor meets different wood crafting work demand.Fast changing chuck design,63 inch cord,transparent base,accurate gauge ruler..
  • Various applications in wood trimminng: package comes with straight guide,roller guide for carpentry wood laminating slotting , edge trimming..
  • 15 pieces 1/4" Router Bits Kits: Wood case router bits contains straight bit,V grooving bit,dovetail bit,round bit and so on..
  • Package Includes: 1.25 HP router tool with 5.2ft cord, 15 router bits in wood box, edge guide, roller guide,, wrench and replacement carbon brush..
Check Stock