ReviewsStraight Line Bevel Edge

Router Table Set Up Bars #PRS3400 Replace for Kreg-(Set of 7).

  • 【Router Auxiliary Tool】 Are you still worried about not being able to use compact router for getting quickly a straight line on the wooden board? Please use our auxiliary tool ——DNP618 Router Edge Guide, so you will easily get a straight line on the board! This tool is made of all iron, electrophoresis process anti-rust, hard enough not to bend, durable and has a smooth surface, which will not damage your wood board..
  • 【Multiple Adaptations】 This straight edge guide works for DCW600B 20V Max XR CORDLESS ROUTER, DWP611 COMPACT ROUTER, DNP612 Plunge Base, DW6913 Router Edge Guide, PORTER-CABLE 450 and 451, it will be a perfect addition..
  • 【Easy to Install】 The length of Edge Guide is 10 inch, use the included two screws to install the edge guide on the base compact router, and then you can get precise positioning of inlays, dadoes, and more..
  • 【Two Usages】 Like the picture instructions, you can get two usage methods. Extend from the edge of the material to 3 inches or more, If you use the second way to increase the length of the guide, this is very helpful when routing out past the end of your material to help keep the router from dipping into the wood and cutting too deep..
  • 【Precise Positioning】 Features an easy slide and lock positio....
Check Stock

Chef'sChoice Hone Electric Knife Sharpener for 15 and 20-Degree Knives 100% Diamond Abrasive Stropping Precision Guides for Straight and Serrated Edges, 3-Stage, Gray

  • Electric 3-stage knife sharpener for straight, serrated, single-, and double-bevel knives.
  • Puts a sharp edge on european/american (20 degree) and asian-style (15 degree) knives.
  • Patented flexible stropping/polishing disks for a microscopically polished edge.
  • 100-percent diamond abrasives sharpen and hone.
Check Stock

BLACK+DECKER 20V MAX* POWERCONNECT Cordless Jig Saw BDCJS20C

  • VERSATILE USE – Make straight, curved, angled, and plunged cuts, even during detailed applications..
  • VARIABLE-SPEED TRIGGER – Cut up to 2,500 rpm for enhanced control over every job..
  • TOOL-FREE BLADE CHANGES – Quickly swap out both U and T shank blades without extra tools..
  • 45-DEGREE BEVEL SHOE – For angled cuts in both directions..
  • WIRE GUARD – Provides a clear line of sight for precise cuts..
Check Stock

TACKLIFE 6.7 Amp Barrel Grip Jigsaw with Laser & LED, Heavy Duty, Variable Speed / 4 Orbital Settings, 6 Blades, Sturdy Case - TJS02A

  • ...terials efficiently. 6-speed dial and 4-orbital setting allow you to control the speed (0-3100 SPM) and orbital action accurately, and tackle a variety of applications with greater finesse..
  • Laser/LED & Dust Extraction The precise beam of laser follows and highlights the cutting line, increasing accuracy when making straight cuts. LED light increases visibility in dim light. Dust blower help clear the sawdust of cutting line, and you can also connect the saw to the vacuum for more effective dust extraction..
  • Bevel Cut & Aluminum Shoe No need of the screwdriver, the shoe of jigsaw can be tilted from 0-45in left or right to make bevel cut, which is accomplished by loosening and tightening spring-loaded lever. Aluminum baseplate is anti-deformation and can work to eliminate vibration during operation..
  • 6 Blades & Tool-free Blade Change Comes with 6 pieces 4-1/5" blades for wood, plastic and soft metal. You can change the blade in seconds without any other tool. The item is delivered in a sturdy case for storage and transportation, you can place blades and manual in the interlayer..
Check Stock

AIOPR 20V 4-1/2" Cordless Mini Circular Saw with Laser Guide, Rip Guide, Vacuum Adapter and 2 Blades (97630L)

  • Easy & Quick Change of Blade. The 24 teeth wood saw blade and the 60 teeth metal saw blade could be changed with the Allen key easily and quickly..
  • Laser Guide & Bevel Level. The laser guide helps cut a straight line accurately. The bevel lever allows you to set cutting angle up to 45 degrees, max cutting depth is 1-11/16" (at 90°) and 1-1/8" (at 45°)..
  • Clean & Safe. Dust port vacuum adapter keeps cutting area clear out of wood debris.
  • Lock-off Switch prevents the machine from accidentally starting up..
  • Ergonomic Design. Soft rubber handles designs to comfortably fit in hand for improved control with minimal vibration.
  • laser guide and rip guide for precise cutting..
  • What You Get. 1* Mini Circular Saw (with Battery), 1* 24T TCT Saw Blade, 1* 60T HSS Saw Blade, 1* Charger, 1* Allen Key, 1* Rip Guide, 1* Vacuum Adapter, 1* User Manual..
Check Stock

XCMAN Ski Snowboard Side Bevel File Guide Edge Tuner Tool Multi 87 88 89 90 Degrees with a File

  • High Quality Ski Snowboard Side Edge Bevel Multi tool with 87 88 89 90 degrees include a file..
  • Ideal for ski snowboard edge tuning to to sharpen and bevel your ski edges..
  • If you don't know what side angles of your ski/board are set to, this tool can help you find them..
  • The XCMAN Edge Tuner Tool is like an exfoliating mud bath for you snowboard's edges after a long day of rubbing shoulders with rocks, trees, and ice..
  • The kit includes a precision guide that provides a 0,1,2,3(90 89 88 87) degrees bevel, include a file(File size:70*28*4.8mm)..
Check Stock

ImpressArt 3mm Metal Stamping Kit with Hammer, Steel Block, Stamp Straight Tape - Newsprint Lowercase

  • This ImpressArt Newsprint Lowercase metal stamping kit includes all the essential tools for hand stamping metal jewelry and crafts..
  • The one pound head Hammer provides optimal weight to leave deep, crisp impressions on your jewelry and crafts..
  • The steel block provides a solid surface and is conveniently sized to take up little workbench space..
  • Stamp Straight Tape allows precise accuracy when stamping letters on metal jewelry. Simply create a straight line with the top edge of the tape along your workpiece to create a guide. Lightly place stamp on disc and drag it towards the edge of the tape until you feel the bottom of the stamp catch the edge. Now all of your stamps will line up perfectly. To help evenly space out your letters, mark your Stamp Straight Tape with a pen where each letter will be stamped..
  • The Newsprint metal letter stamps are labeled on the side for easy identification. The stamp set includes 7 bonus stamps: "?" "!" "," "*" "-" "(" and check mark. Each stamp has a 2-1/2 inch long shaft that is clearly labeled on one edge. The actual stamped impressions are 3mm tall, each letter set comes in ImpressArt's sleek storage case. The case features labeled slots for each stamp to keep them organized and for easy access..
Check Stock

Cup Edging Tool Tumblers Level Line Drawing Edge Trimmer for Tumbler Craft Remove The Rough Edges and Make Level line

  • ...gn, No risk of Slide Cups. The Mark pen Holder Adjustable Height Range is 1 to 7.8inch(20cm) Help You Mark different Height Line on your Tumbler..
  • 3, How to Use: (1), Cut Edging : After applying the fabric on Tumbler, let it dry. keeping Tumbler pressed against the blade And Turning the tumber Arround, There will be straight cutting Line. Peel the fabric from the cup.You will get perfect straight edge. (2), Level Line Drawing :Install the Pen on Metal holder and adjust Pen Height To Determine the Line Postion You Want to Mark on the Tumbler. Keep Tumbler Against the Pen Head And Turning Arround, You will Get Perfect level line on Tumbler..
  • 4, How to Adjust the Height of Blade: Use wrench to unscrew the blade Cover, And Switch the blade and raiser position, the blade height can be up and down. There are four layer Raiser , Each Raiser is 0.12inch (3mm) You can find the right height you want to apply for your Tumblers. Caution: The Blade is very sharp please do not use your hands touch the blade-side ..
  • 5, Where Can Find Blade replacement: We use very good quality and very Sharp double-side Blade, You can switch the other side to cut. one blade double used. You can also Find replacement by Search ASIN: B08K2GN3CP. Please contact Via Amazon if More As....
Check Stock

Chef'sChoice 4643 Manual Knife Sharpeners 15 and 20-Degree for Serrated and Straight Knives Diamond Abrasives, 2-Stage, Gray

  • CHEF'SCHOICE - Professional 2-stage sharpener for super sharp edges on your 15 and 20-degree class knives.
  • DIAMONDS - 100 percent diamond abrasives are used in all three stages. The initial stages sharpen and hone using 100 percent diamond abrasives while the third stage polishes the edge with micron sized diamond abrasives.
  • KNIVES - Sharpen straight edge and serrated knives as well as sports and pockets knives.
  • RAZOR SHARP - Chef’sChoice advanced CrissCross sharpening technology delivers an extremely sharp edge by using diamond abrasive wheels which sharpen simultaneously for a superior burr-free edge that cuts effortlessly.
  • EASY TO USE - Precise bevel angle control creates ultra-sharp 15 and 20-degree edges.
  • DURABILITY - Separate sharpening and honing/polishing stages for a razor sharp, arch-shaped edge that is stronger and more durable.
  • FEATURES - a Soft Touch comfortable handle for an easy and secure grip.
  • When buying, please check whether the product is "Ships from and sold by " just below the product price to make sure you are receiving this product from the manufacturer of Chef'sChoice to ensure your product guarantee is honored..
Check Stock

Expert Edge Care Kit Ski Side Angle Tool +3 Swix Diamond Stones +Gummi Stone

  • Expert Edge Care Kit - Everything you need to professionally sharpen ski and snowboard edges. Side edge bevel multi tool that includes a Swiss-made....
  • High quality Swiss-made ICECUT included (80 mm).
  • Adjustable precision side edge angles from 85-90 degrees in 1....
  • All 3 Grits Swix Diamond Stones TA200E, Medium TA400E, Fine TA600E.
  • 200, 400, and 600 grit stone for deburring, sharpening, honing, polishing ski and....
  • One Gumi or Gummi Stone for prepping an edge, deburring as the final step in edge sharpening, or detuning..
  • Routine sharpening is done from the side edge only. A base edge bevel is not included. Base work is less frequent and typically only at one angle (1....
Check Stock

Makita 5007F Circular Saw

  • Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and jobsite durability.
  • Lower guard design improves performance when making bevel and narrow cuts.
  • Large cutting capacity (2-3/8″” at 90°, 1-3/4″” at 45°).
  • Two built-in L.E.D. lights illuminate the line of cut for increased accuracy.
  • Well balanced design for superior handling and performance.
  • Heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts.
  • Built-in dust blower clears the line of cut for greater accuracy.
  • Technologically-advanced centrifugal fan and baffle system for efficient cooling of the motor.
  • Bevel cuts 0-45° for the most common angles.
  • Large and easy-to-read markings on depth and bevel scales.
  • Flat motor housing design increases stability when changing blades.
  • Conveniently located shaft lock for easy blade replacement.
  • AC/DC switch allows for use with alternative power sources.
  • All-ball bearing construction engineered for longer tool life.
  • Ideal for framers, builders, masons and siding contractors.
  • Powerful 15.0-AMP motor delivers 5,800 RPM for proven performance and jobsite durability.
  • Large cutting capacity (2-3/8-Inch at 90-Degree, 1-3/4-Inch ....
Check Stock