ReviewsStraight Pipe Fitting

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....

Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....

Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
【Operating temperature range】Temperature rating: -65 to 250 degrees F.
【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..

Check Stock

RIDGID 40220 461 Straight Pipe Welding Vise, 1/2-inch to 8-inch Pipe Welding Clamp,Red,Small

Designed for secure clamping onto straight pipes.
pipe welding vise is available in straight, angle, elbow and flange styles.
Constructed of durable, performance-proven material for reliable, long-lasting use.
Straight welding vise resists strain, heat and warping during tacking.
Machined swivel nuts and pins combined with special chain screws allow for smooth, trouble-free vise assembly onto the pipe.
Straight pipe welding vise has a 1/2-inch to 8-inch (15 mm to 200 mm) pipe capacity.

Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.

Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
Thick formula fills gaps in large diameter pipe and loose fitting joints.
Recommended for potable water, pressure pipe, conduit and DWV.
Recommended application temperature 40°F to 110°F / 4°C to 43°C.

Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.

Check Stock

H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element

...quipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter Regulator. If you face any problem, please reach to us we will provide you the best possible solution. We are here for you!!!.

Check Stock

Neiko 50463A Grease Fitting Assortment | 110 Piece | SAE | Straight and Angled Zerk Kit | A3 Steel | for Angled Grease Guns, Bearing Housings, Mechanical Component Lubrication

[APPLICATION]: Grease fittings, sometimes known as Zerks or grease nipples, are small hydraulic check valves used on bearings and similar mechanical assemblies to supply lubricant to internal working parts..
[HYDRAULIC GREASING]: These grease zerks feed lubricant into a bearing instead of having to disassemble parts to apply the lubricant, which makes for effective work efficiency when using a grease gun..
[COMPATIBILITY]: This assortment kit is perfect for use on cars or vehicles and solves OEM incompatibility issues with straight, 90-degree and 45-degree angled fittings to allow a pressure-resistant connection..
[CONVENIENT]: The plastic storage case contains each SAE grease zerk fitting in the kit in different compartments with an organization chart to neatly stay organized in your tool collection..
[INCLUDES]: Sizes - 30 straight 1/4-28, 20 straight 1/8" pipe grease, 15 45-degree, 1/4-28 and 15 90-degree 1/4-28 for angled grease guns and more..

Check Stock

Spears 1436 Series PVC Tube Fitting Adapter Schedule 40 Gray 1-1/2 Barbed x NPT Male

For use in connecting NPT pipe to schedule 40 PE flexible tubing in a straight run.
Barbed fitting creates a tight seal on flexible tubing when used with a hose clamp (sold separately).
Maximum working temperature of 140 degrees F.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Meets ASTM D2609 standards for plastic insert fittings and NSF 61 certified for use with potable water.

Check Stock

Green Label Micro Vacuum Attachment Kit - 7 Piece Compatible with Most Vacuum Cleaner Hoses with 1.25-1.38 Inch Diameter (Round Friction Fit Type Wands). Green Storage Bag

Fits 1 1/4 inches friction-fit wands. 35 mm (1.38 inch) adapter included for European sized friction-fit wands. Kit contains: 1 adaptor, Pipe connector with adjustable suction fitting, Flexible tube (approx. 36” length), Curved 'elbow' extension pipe, Straight extension pipe, Wide oval brush, Narrow round brush, Thin (chamfered) crevice tool.
PLEASE NOTE: One of the adapters has an air flow control valve which can not be fully closed (small holes). This is not a defect but intentional design. It is there for 2 reasons: 1) It was intentionally designed and manufactured this way to avoid too much suction on delicate electronics and jewelry items. 2) IT HELPS TO AVOID VACUUM CLEANER OVERHEATING WHICH MAY LEAD TO MALFUNCTION.
Does not fit any clip mounted wands like Miele, Dyson and Shark. DOES NOT FIT ANY HAND HELD VAC THAT DOES NOT HAVE A HOSE OR A WAND.
No questions asked return policy. Fully refundable. Green Label is a manufacturer of premium aftermarket vacuum and steam mop filters and accessories.

Check Stock