ReviewsStraight Shank Collet

5pcs 3.9mm HSS Twist Drill, High Speed Steel 6542 Black Oxide Drill Bit with Straight Shank to Cut Through Stainless Steel, General Steel, Cast Iron, Wood, Plastic.

  • High Quality Material Selection, Stable Performance, High-Quality High-Speed Steel Milling And Forming, The Overall Vacuum Heat Treatment, Special Grinding Edge On The Head, Good Positioning, Sharp And Durable Drill Bit..
  • With High Coaxiality And Overall Grinding, The Grinding Drill Bit Is Better Than The Rolling Drill In Both Accuracy And Life, Especially The Toughness Is Increased Several Times, And It Is Not Easy To Break During High Strength Machining..
  • Flutes Form - 2 Flutes Form Helps Clear Chips And Debris Away From The Bit, Decreasing Friction And Heat For A Faster, Cooler Drilling Process, Chatter-Free Design With Staggered Cutting Teeth Ensure The Precise Countersinking And Hole Smooth Clean..
  • Straight Shank And 135° Point Angle - Straight Shank For Standard Drill Chucks And Collet Chuck To Hold Firmly, Assuring Accurate Centering.
  • Helical Flute For Swarf To Easily Get Out.
  • Ideal For General Purpose Drilling Applications..
  • Carburizing And Quenching Process Is Adopted With High Surface Hardness, Strong Fatigue Resistance, Higher Efficiency And Long Service Life.Especially Suitable For Aluminium Alloy, Iron, Plastic, Iron, Wood, 201 Stainless Steel..
Check Stock

Jrealmer 6pcs 1/4 6mm Shank Tungsten Carbide Burr 1/2 12mm Head 5 120mm Long Rotary Burr for Steel Cutting Woodworking Single Groove Set

  • 〖Single Groove〗-single groove tungsten carbide suitable fr processing soft non-ferrous metal,plastic or high tensile steel or hard wood.
  • 〖Length 5"〗-This length of this product let you get to deeper inner holes and places that are difficult to reach.
  • 〖Material〗-YG8 Tungsten Carbide which can get to HRC65-70 and 20Cr material shank.Not easy to deform and high concentricity..
  • 〖Including 6mm Collet〗-Due to our tungsten carbide burr shank is 6mm,we will include 1x6mm electric grinder collet in packing. This collet will make your work easy and it is universal for all electric grinder.
  • 〖Type and Size〗Including C/D/E/F/H/L type and all 1/2"(12mm) tungsten carbide head. This six type is in common use and eough to your work..
Check Stock

MLCS 9464 Router Collet Extension, 1/2-Inch Shank, Accepts 1/2-inch Shank Bits

  • Extend your router bits an additional 2-1/4-inch.
  • Eliminates the dangerous temptation to withdraw the shank from the collet..
  • Use all diameters of 1/2-inch shank bits safely.
Check Stock

GYROS Keyless Mini Adaptor Chuck | ⅛ Inch Straight Shank | With 3 Collets for Precision Drilling | 0” to .098” Capacity for Micro Drill Bits #40-80 | For Dremel, Rotary, and Drilling Tools (45-01803)

  • Accurate & Precise: This Gyros steel micro chuck adapter fits mini drill bits no. 40-80 and has 0” (0 m) - 0.098” (2.5 mm) range, making centering tiny bits and the thinnest wire in a hand, electric drill, or rotary tool simple and uncomplicated..
  • 3 Collets and ⅛” Straight Shank: This small chuck features three collets and a size range of 0” (0mm) to 0.089” (2.5mm), making it suitable for a wide range of tasks. With a popular ⅛ Inch straight shank to employ Flexible shafts, rotating hand tools, hand grinders, and most hand/or motorized equipment and drills..
  • Keyless Design: Our micro chuck adaptors’ keyless design allows you to swap bits and wires fast and effortlessly, streamlining all of your chores. Nickel-plated brass construction reduces friction and allows for better tightening..
  • Professional Use: Craftsmen, model makers, hobbyists, jewelers, and DIY hardware applications all use this type of accessory. This is a must-have item for your toolbox. For the greatest drilling results, pair with the Gyros HSS Wire Gauge Mini Twist Drill Bit Set 45-22010..
  • Manufactured with Quality Control: to ensure The collet cut is centered on this micro adapter chuck it is manufactured with quality control. Ideal for all precision and complicated drill....
Check Stock

5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 2pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

  • Cobalt Steel – Manufactured From M35 5% Cobalt Steel, With Molybdenum And Cobalt Added To Creates A Hardened Alloy, Measuring Rockwell Hardness Up To 65, For Much Faster Cutting And Extra Longer Life Span, With Up To 10 Times When Compared with an Average HSS Drill Bit..
  • HSS Titanium Coating – Classic HSS Construction With Titanium Coating For Capability And Durability. The Cutting Edge Is Hardened And Honed For Sharpness..
  • Flutes Form – 2 Flutes Form Helps Clear Chips And Debris Away From The Bit, Decreasing Friction And Heat For A Faster, Cooler Drilling Process, Chatter-Free Design With Staggered Cutting Teeth Ensure The Precise Countersinking And Hole Smooth Clean..
  • Straight Shank And 135° Point Angle – Straight Shank For Standard Drill Chucks And Collet Chuck To Hold Firmly, Assuring Accurate Centering.
  • Helical Flute For Swarf To Easily Get Out.
  • Ideal For General Purpose Drilling Applications..
  • For Metalworking – Particularly Successful In Cutting Through Hard Metals(Hardness Less Than Hrc38°) Such As Stainless Steel And Cast Iron, Although They Can Be Used For Softer Materials Like Copper And Aluminium, Too. Not For Hardened Steel And High Carbon Steel..
Check Stock

Thaekuns 42999 1/4-Inch Router Collet Fits for PORTER CABLE models,Delta, B&D

  • ⭐For use with 1/4 inch shank router bits | 1/4 inch router collet.
  • ⭐Material: Steel | Helps decrease the amount of lost bits.
  • ⭐Outside Diameter: 0.25 inch | Collet Nut size: 1/4 inch.
Check Stock

5\ EXTENSION PNEUMATIC EXTENDED LONG SHAFT AIR DIE GRINDER TOOL W/ MINI OILER

  • Inlet Size: 1/4" , Air Consumption: 3.2 cfm.
  • Designed for High Speed Grinding & Polishing In Hard to Reach Area, Professional design, Has collets allowing you to use 1/4" shank tools..
Check Stock

3M 37546 Standard Abrasives Cartridge Roll Mandrel 701529, 1/4 in x 2 in x 1/4 in x 1 in x 4 in CM-23 Coating Cut Cutting Angle Flute (Pack of 5)

  • Fits all standard abrasives straight, full tapered and half tapered cartridge rolls.
  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool.
  • Mandrel enables access to tight spaces with a cartridge roll.
  • Comes in various pilot diameters and lengths to fit different cartridge rolls.
  • Made of plated steel for enhanced durability.
Check Stock

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

THINKWORK Compact Router, 6.5-Amp 1.25 HP Compact Wood Palm Router Tool Kit, Wood Trimmer with 15 pieces 1/4

  • ...g conditions. The transparent base is designed to recognize accuracy easily in processing..
  • Rich AccessoriesInclude several accessories, such as wrenches, chucks, template guide adapter, sub-base plate, and more. The Trimming guide, roller running along the curve, ensuring cutting is exact, curve processing is fine. Straight guide, thicker models are stable and not deformed, straight processing is stable. You can tighten the router bits with the wrenches..
  • Wide ApplicationThis wood compact router is widely used in wood processing, cabinet processing, handicraft production, wood veneer, and other similar materials chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing operations activities, DIY..
  • What You Will Get15 pieces 1/4" shank router bits set(Bonus Gift!), 1x 110V compact router, 10 x sandpapers, 1 x 1/4" to 1/2 " router collet, 1 x straight guide, 1 x guide plate, 1 x trimming guide, 2 x wrenches, 6 x carbon brush, 1 x bolt, 1x screw, 1 x manual, and our easy-reach customer service..
Check Stock