ReviewsStrong Threads

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.

Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, M3-0.5 Internal Threads, M6x1.0 External Threads, 6.48mm Length, Made in US (Pack of 10)

THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14/Metric, M12-1.75 Internal Threads, 3/4\-10 External Threads, 16.66mm Length, Made in US (Pack of 5)

THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – C12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock

E-Z Lok Externally Threaded Insert C12L14 Carbon Steel Meets AISI 12L14/Metric M10-1.25 Internal Threads 9/16 -12 External Threads 13.08mm Length Made in US Pack of 10

THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – C12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock

E-Z LOK - 329-801 E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 1/2\-13 Internal Threads, 3/4\-10 External Threads, 1.000\ Length, Made in US (Pack of 5)

THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, M5-0.8 Internal Threads, M8x1.25 External Threads, 7.49mm Length, Made in US (Pack of 10)

THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock

Hitena Rod Wrapping Thread - Metallic Versa Winding Thread Twist of Metallic and Nylon/NCP Threads for Deco Wrap Strong Enough to Be Used for Primary Wrap

38 uniquely variegated patterns out of Nylon/NCP/Metallic threads blend.
Strong enough to be used for primary wrap.
All threads come with Lifetime UV Color Fastness Guarantee (Color never fades over time).
Metallic Versa is a twist of Nylon/NCP/Metallic threads so Nylon part will fade when finish is applied without color preserver while metallic part....

Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..

Check Stock

E-Z LOK - 329-6 E-Z Lok Externally Threaded Insert C12L14 Carbon Steel Meets AISI 12L14 3/8 -16 Internal Threads 9/16 -12 External Threads 0.515 Length Made in US Pack of 10

THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock

E-Z LOK - 319-5 E-Z Lok Externally Threaded Insert C12L14 Carbon Steel Meets AISI 12L14 5/16 -18 Internal Threads 7/16 -14 External Threads 0.437 Length Made in US Pack of 10

THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock

Century Drill & Tool 92913 Rethreading Die, 5/8-11NC

【Round Die】- Thread size: M6 x 1.0mm.
Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..

Check Stock