ReviewsStructural Adhesive

GSSI Sealants Butyl Tape 1/8\ x 1\ x 100' (2 Rolls at 50') Black

Makes construction jobs move smoothly and quickly.
Superior adhesion. Stronger than standard putty tapes. Easily trimmed with blunt tool. Awled quickly and cleanly. Provides watertight seal. Easy application. Excellent adhesion to sidewalls. No discoloration..
To purchase a quantity of 1 (50ft) see ASIN: B01CUBJ4PS. To purchase a quantity of 8 (400ft) see ASIN: B01D98QHB0..
For best results, apply in dry conditions above 40°F (4°C)..
NOTE: MH-19 is a sealant and not a structural adhesive. Its tacky surface allows the tape to adhere to various substrates to obtain a good seal, but it’s not intended to be the sole structural component. Mechanical fasteners may be needed..

Provides thorough mixing and precise placement of two-component structural adhesives.
Available in a variety of designs to fit all cartridge sizes.
easy to replace with new nozzle to use remaining adhesive in a cartridge.
Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing.

EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..

EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..

1. Reattach separated tabs on rear window defrosters and defoggers. Defroster tabs are located along the sides of the defroster and frequently become....
2. Fortunately this is an easy defroster repair you can do yourself and save the high cost of glass replacement..
3. Frost Fighter Defroster Tab Bonding adhesive is over 80% silver. This high silver content is needed for highly conductive tab bonding required in....
4. The highly conductive two part adhesive cures quickly, bonds aggressively and makes the electrical and structural connection to the defroster in....
5. We engineered this this system specifically for tab bonding. This system to be easy to use, bond aggressively to glass and defroster coatings and....

Easy to apply – One-part adhesive sealant requires no mixing, cures completely in 5-7 days.
Use what the pros use – Extremely strong adhesive sealant retains strength above or below waterline.
Tough, flexible bonds – Stays flexible, retaining strong bonds even during vibration, structural movement, swelling, shrinking or shock.
Bonds permanently – Ideal for sealing, bonding and attaching on the interiors of boats or on exteriors where shielded from the sun.
Long lasting formula – Tough polyurethane polymer resists weathering and salt water.

✔Size: Each self adhesive kraft paper gummed tape roll core is normal 3inch/76mm, width is 2inch/ 50 mm, length is 55yds/roll. Total 4rolls 220yds....
✔Self Adhesive: Reinforced packing paper tape with strong adhesive, no need to wet the tape first. Just use directly, and adhere well to different....
✔Heavy Duty: With fiberglass reinforced, brown paper packing tape is perfect for heavy duty box packing, providing structural support and reinforced....
✔Usage: paper gummed packing tape is a good tool for heavy duty and high volume storage, packaging, moving, shipping, and sealing. Also use for....
✔Pls Note: Reinforced self adhesive paper packaging tape DONT stick to itself, so that cant do the overlap..

3M Marine Adhesive Sealant 5200 is extremely strong, retains its strength above or below water line.
Has excellent resistance to weathering and salt water.

Strong structural adhesive formulated for bonding dissimilar materials and unprepared metals.
Bonds hard plastics, metal, concrete, glass, ceramic and more.