ReviewsStructural Applications

Lenox Classic Tuff Tooth Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 186\ Length, 3/4\ Width, 0.035\ Thick, 3 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, tubular shapes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Raker set for general-purpose cutting applications.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock

Ramset Powder Fastening Systems 2-1/2-Inch Washer Pin w/Ramguard 100 per Box

  • ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to....
  • Coated to improve corrosion resistance in treated lumber and other applications.
  • Washer increases bearing surface against the material to be fastened.
  • Designed for use in treated lumber applications.
  • Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
Check Stock

CECCORP C-Tough Epoxy Glue (8.5 Oz Combined) 2 Part Adhesive – for Metals, Aluminum, Glass, Fiberglass, Masonry, Wood, Stones, Rigid Plastics (P.V.C – ABS) – Not Suitable for PTFE.PP.PE & Rubbers

  • ★ COMMON APPLICATIONS - Anywhere that you would need an extraordinarily strong structural bond with long working time. C-Tough can be used in Household, Industrial, Automotive, Aircraft, Marine, Construction, Building, Transportation, Wood Working, Hobby Applications, and more..
  • ★ COMMON USES - Aluminum/Wooden Boat Repair, Knife Handle Making/Repairing, Fiberglass Patching/Repairing, Golf Reshafting, Sword Handle Assembly/Repair, Furniture Repair, Any Kind of Structural Bonding on Aluminum Parts, Canoe Repair, Composite Bonding, Gun Stock Assembly/Repairs, Pen Manufacturing, RC Airplane Engine Mount Repair, Infilling Cracks/Knots, Guitar Repair, Manufacturing Flies for Fly Fishing.
  • ★ PRODUCT FEATURES - Extremely Durable, Has a Consistent Thickness, is Water and Impact Resistant. Shock Resistant while being able to withstand Vibration, Contraction, and Expansion. After it cures it can be Impact and Shock Resistant in below zero temperatures and has a very strong Chemical Resistance. C-Tough has an easy 1:1 volume mixing ratio and allows for a long working time with a 24-hour full-cure time..
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock

Muzata Cable Railing Post Corner Post Square Weldless Flat top 36\x2\x2\ Stainless Steel Brushed Pre-Drilled 1-Post Corner Solution Wood Concrete Top Mount Deck PS02 LC4S PT1 PT3 PT6

  • Please check “Make it a bundle” below the descriptions to get the matched corner bracket for this post. Corner applications - This 36’’ square cable railing post (brushed finish) is specially designed for corners, realizing a one-post corner solution. It is pre-drilled with 10 pairs of 90 degree holes to work on horizontal sections. It can act as structural corner post in level sections. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PM05 to find the aluminum cable railing posts.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slic....
Check Stock

Lenox - 80162D2B51640 Diemaster 2 Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 10-14 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Vari-raker tooth set for general-purpose cutting applications.
Check Stock

4 x 100 ft Perforated Corrugated Drainage Pipe

  • Low-profile channel drain system for lightweight to medium applications. Dimensions of each channel: 5" W x 3" H x 39" L - (117" Total Length if you....
  • This Drain Channel System can be connected on multiple bottom positions and side outlets, easy cut out guides. Included Outlet Connector and Adaptor....
  • Interlocking connections for a fast and easy installation. Anti-flotation feet stop the channel from moving or floating during the concrete pouring....
  • Lightweight Polypropylene plastic with structural reinforcements makes these channels tough and durable. Ideal for the multiple applications:....
  • Available in 1-PACK and 3-PACK Kits. All Kits Include: 1 x Bottom/Adaptor Outlet Connector, 1 x End Outlet Connector and 1 x End Cap. (Additional....
Check Stock

Simpson Strong-Tie SDWS16300Q .160 x 3' SDWS QuikGuard Framing Screw 1000ct

  • Large head with underhead box-nibs provides increased bearing in structural applications and provides clean and easy countersinking (0.44-in. head dia.). SawTooth Type-17 tip for quick starts with no predrilling.
  • Serrated threads reduce installation torque for easier driving. The 6-lobe drive reduces driver-bit cam-outs, resulting in easier installations and longer bit life.
  • Driver bit included (BIT25T-2). Length: 3 in..
  • Quik Guard coating provides protection in indoor and outdoor applications. Color: Tan.
Check Stock

Method Race Wheels 312 Matte Black 17x8.5" 6x5.5", 0mm offset 4.75" Backspace, MR31278560500

  • Solid A356 aluminum with T6 heat treatment construction. Tough 6 windowed point design with debossed METHOD logos.
  • Street-Loc V.3 lip with undercut simulates true beadlock wheel.
  • Replaceable MRW stainless steel lip bolts with optional colors available. Bolt-on center cap — push through cap for 8 lug applications.
  • Strong 2500 lbs. to 3640 lbs. load ratings. Industry’s best lifetime structural warranty.
  • Hub centric fitments for common applications.
Check Stock