ReviewsStructural Steel Supplies

3M Panel Bonding Adhesive, 38315, 50 mL Cartridge

  • Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
  • A high performance two component epoxy adhesive..
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components..
  • Also use to reinforce welded or riveted structural components..
  • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL.
Check Stock

25 pcs M16-2.0 X 105mm DIN 6914 / ISO 7412 / EN 14399-4 Metric Heavy Structural Hex Bolts Class 10.9 Steel Galvanized

  • Heavy hex structural bolts are designed to withstand the load of a steel-to-steel connection..
  • Commonly used in structural steel joint in construction and building applications..
  • Class 10.9 steel is an alloy steel, quenched and tempered, with a minimum tensile strength of 1,040/mm-2 (Mpa)..
  • The washer face under the head provides a precision bearing surface..
  • The chamfered point improves engagement with a nut or pre-tapped hole..
Check Stock

Lenox Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93.5" Length, 1/2" Width, 0.025" Thick, 14-18 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Wavy set helps prevent stripping for cutting thin workpieces.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock

Hold Up Displays - Vertical Gun Hanger and Rifle Storage Securely Holds Firearm and Bow - Real Walnut Hardwood Harvested in Wisconsin - Made in USA

  • UNLIKE THE TYPICAL GUN HANGER OF UNKNOWN origin and quality that potentially puts your guns like Remington, Sig Sauer, Glock and Springfield Armory in life threatening danger, the HOLD UP DISPLAYS GUN HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN HARDWOOD and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are shooting your guns or not, they are always in the right hands.
  • GUNS ARE MEANT TO HAVE PROPER STORAGE While safer when transported inside a case along with your lubricating oil, safety ear muffs, ammo, magazine and other tactical gear, guns are also practically meant to be displayed for your enjoyment even when you are not shooting, the HOLD UP DISPLAYS GUN HANGERS will turn your gun into a piece of Wall Art while keeping it safe and sound.
  • YOKE PIVOTS TO ACCOMMODATE VARIOUS BUTTSTOCKS Great for guns which have a headstock with single or uneven heels.
  • Personalized protective padding gently and securely supports the firearm, unlike non padded wooden hangers that can leave scratches on your firearm.
  • Deep cradle design prevents the gun from being improperly placed in the hanger.
  • OVER 10 YEARS SERVING GUN OWNERS ALL OVER AMERICA No matter what kind of firearm that....
Check Stock

Little Giant WX-3660-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 60\ x 36\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Little Giant WX-4284-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 84\ x 42\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Lenox - 80162D2B51640 Diemaster 2 Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 10-14 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Vari-raker tooth set for general-purpose cutting applications.
Check Stock

Lenox - 93328RPB72360 RX+ Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 5-8 TPI

  • RX+ tooth design reduces strippage at high feed rates.
  • Bimetal for cutting carbon steel and structural steel.
  • Good for cuts in tubular shapes, structural shapes, and tubular bundles.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
  • Made of M-42 high-speed steel for heat and wear resistance.
Check Stock