ReviewsStrut Mounts

Apexstone 160N/36lb 10 inch Gas Struts, Gas Shocks, Gas Springs, Gas Strut Lift Support 160N Hinge, Lid Stay, Set of 4

  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″.NOT SOFT CLOSE GAS STRUT!!!.
  • 36 lb Gas Shocks Perfectly suitable for truck toolbox lid, RV door, cabinet lid, bed with storage,and other DIY projects.WORKING TEMPERATURE: -10 ℃ – 40 ℃/14℉-104℉.
  • Lids soft open gently,Ideal for supporting the lid to keep it open,Support opens lids to a maximum angle of 90 degrees,it fit for the door/lid which the WIDTH is Less than 20 inch , the WEIGHT is between 36 and 72 lb.
  • INSTRUCTIONS&SCREWS INCLUDED In the package,While you can feel free to Click “Ask Seller” Besides Your Order for In-time Assistance.
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our 35 LBS GAS STRUT did not work well ,please kindly contact us for exchange, refund or return.
Check Stock

2 Truck Upfitters 20

  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL ARE TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!.
  • Truck Upfitters Pair (2 total) of 110 pound (each) gas struts. 19.7″ extended length and 11.8″ compressed length. Most commonly used for ARE brand and ARE style Tonneau covers with lift assist arms. Fits other similar brand of fiberglass tonneau covers /truck lids, but measurement is required to ensure fit..
  • These do not fit all fiberglass tonneau models. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement..
  • Comes with four threaded 10mm ball mounts and nuts for alternate ‘other than tonneau cover’ applications. Equivalent to Suspa #C16-17796. Prime! Free Shipping! In Stock!.
  • Fits most ARE Shortbed and Longbed (5.5-8.0′) Truck Tonneau Covers with Lift Assist Arms..
Check Stock

MOCA 171661 Front Strut Assembly Shock Absorber for 05-09 Buick Allure 3.8L & 97-05 Buick Century 3.1L & 00-03 for Chevrolet Impala 3.4L

  • Fits: 2004-2005 for Chevrolet Monte Carlo 3.4L & 1997-2003 Pontiac Grand Prix 3.1L and etc..
  • All components manufactured meets or exceeds OEM performance, Fully loaded complete assemblies is safe and easy to install.
  • Local US friendly after-service team to resolve your issues in time, parts have worry-free 2 years warranty or 60000 miles.
  • Complete Strut Assembly - Equipped with Strut, Soil, Spring & Mounts - Ready to Install.
Check Stock

ENA Front Engine Torque Strut Mount Compatible with Toyota Camry 2.4L Replacement for A4204

  • Engine Torque Strut Mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications.
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements.
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration.
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail.
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle.
Check Stock

ENA Torque Strut Mount Compatible with Toyota Camry V6 3.0L Auto Trans Replacement for A4236

  • Engine Torque Strut Mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications.
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements.
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration.
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail.
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle.
Check Stock

ENA Torque Strut Front Engine Motor Mount Compatible with Nissan Versa Cube 1.8L Replacement for 11350EL00A

  • Engine Torque Strut Mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications.
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements.
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration.
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail.
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle.
Check Stock

Gas Spring Gas Strut Gas Shocks Soft Close Hinges Toy Box Hinges Lift Supports Lid Support Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring Pressure 120N/26lb/12KG[2 Pack]

  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one....
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is....
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors,....
  • Length ( hole center to hole center) :9-11/16''.
  • Travel:3-14/25'' ,Distance between ball mounts compressed:....
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping....
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

MOSTPLUS Full Coilovers Struts Compatible for Honda Prelude 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 Adjustable Height Suspension (Set of 4)

  • Application: Compatible for 1992-2001 Honda Prelude. 【NOTE】: These Coilovers Strut will "Lowering your car" and DOES NOT keep to Original Ride Height..
  • 45° Adjustable Camber plates / top mounts:Yes.
  • Please check your car information before purchase..
  • Professional installation is highly recommended.
Check Stock

Gas Struts,Gas Springs,Lift Support,Gas Shocks,Lid Stay,Lid Support,Gas Strut Lid Stay Support Kitchen Cabinet Door Hinge,Soft Close Lid Hinge,Gas Shocks,Toy Box Hinges,150N/33lb/15KG[2 Pack]

  • ... Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc..
  • ★ Pressure:150N / 33lb / 15KG (Per Strut).
  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″. Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door..
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming..
Check Stock

16’ Wide Horizontal Garage Door Reinforcement U-Bar Strut Support Brace

  • One - 3 Piece 16’ Wide Horizontal Garage Door Reinforcement U-Bar Strut Support Brace, and Hardware. Stronger Than A One Piece Strut Right Where it Counts! Starting to Bow? Fix Garage Door Bow. Save Your Door And Extend Its Life!.
  • The strut is a three piece strut, and once quickly bolted together it will run the length of your 16’ door. A strut is also known as a u-bar or a brace. As your garage door opener opens it pulls on the middle of the door. Thus creating stress to the door with the risk of creasing the section and the collapse of the section..
  • This strut brace will help reinforce your garage door. Different model garage doors have different outside center stiles. The pre-existing outside center stile holes in the strut may or may not line up with your door’s stiles..
  • Not to worry this is common and not a problem. The included self tappers will drill holes in the strut to attach it to your stiles no matter their placement..
  • Included is 2 - 8 foot door strut support braces, 1 Strut Support Brace Coupler, Assembly Hardware, and Mounting Hardware. Because it’s ship....
Check Stock