ReviewsStud Extractor

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 7L

  • 7L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 9L

  • 9L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • [HIGH QUALITY AND LEAK-FREE]VICRING Oil extractor pump is made of high quality plastic material, which is robust, strong and long-lasting. Fluid extractor exterior has a clear and distinct scale for easy checking of the liquid balance.Oil transfer pump has a capacity of 200cc..
  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or....
Check Stock

DEWALT 20V MAX* Dust Extractor, Brushless, Universal, Tool Only (DWH161B)

  • High mobility, compact and lightweight OSHA Table 1 Compliant solution. HEPA filter is included in the dust extractor..
  • DEWALT dust extractor has 45% more capacity than DWH302DH dust box to keep up with the demands of the user..
  • Multiple strap connection points and a belt hook enable the user to position the dust extractor for the best possible ergonomic solution..
  • Optimized for SDS plus rotary hammers while drilling and chipping..
  • 20V MAX* brushless motor helps provide the power and long run time in demanding applications..
  • WIRELESS TOOL CONTROL allows users to link extractor and tool for remote extractor activation. (Key fob sold separately)..
Check Stock

DEWALT 20V MAX* Dust Extractor Kit, Brushless, Universal (DWH161D1)

  • High mobility, compact and lightweight OSHA Table 1 Compliant solution. HEPA filter is included in the dust extractor..
  • DEWALT dust extractor has 45% more capacity than DWH302DH dust box to keep up with the demands of the user..
  • Multiple strap connection points and a belt hook enable the user to position the dust extractor for the best possible ergonomic solution..
  • Optimized for SDS plus rotary hammers while drilling and chipping..
  • 20V MAX* brushless motor helps provide the power and long run time in demanding applications..
  • WIRELESS TOOL CONTROL allows users to link extractor and tool for remote extractor activation. (Key fob sold separately)..
Check Stock

TunaMax Extractor Tool Hand Wand with Clear Head for Upholstery & Carpet Cleaning, Car Detailing Vacuum Wand for Portable Extractors & Truckmounts | Turn Shop Vac into an Extractor (CUS04)

  • *【Diy a Powerful Extractor】 If you are considering buying a professional extractor, it will be a good substitute. You can therefore save the expensive cost of a pro extractor. Our Extractor Hand Wand can be used as a replacement for many Extractor heads.
  • More importantly, it can turn your wet/dry vacuum into an extractor.
  • *【Two Adapters for Your Choices】 Large size adapter A fits 1-7/8" spiral-wound hose.
  • Small size adapter B fits 1-1/4" spiral-wound hose.
  • *【 Transparent Head Design】The 3.5" width clear head design allows you to see the dirt and impurities being cleaned, and directly see the entire cleaning process and effect in real time.
  • *【Stainless Steel Tube】Standard stainless steel 1.5" vacuum tubing is compatible with portable extractor and truck mount and most carpet cleaning system.
  • *【Attention】Please kindly noted the two adapters are with threads inside, could only connect spiral wound hose directly. Please make sure the hose termination could be taken off before order.
Check Stock

Stanley Proto J9500B Proto 10PC Screw Extractor

  • Drive into end of broken pipe or fitting.
  • Use tap holder or wrench on extractor to turn out broken part.
  • Size stamped on extractor refers to drill bit size to be used with that extractor.
Check Stock

Stanley Proto J9500A Proto 5PC Screw Extractor

  • Drive into end of broken pipe or fitting.
  • Use tap holder or wrench on extractor to turn out broken part.
  • Size stamped on extractor refers to drill bit size to be used with that extractor.
Check Stock

Walton 10253 1/4\

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

Straight Fluted Screw Extractor Set 5 Pcs M4-M18 | 3/16-Inch to 5/8-Inch Easy Out Bolt Extractor Set for Broken Bolt Thread Repair Carbon Stee

  • 1.STRAIGHT FLUTED SQUARE BROKEN SCREW EXTRACTOR：Solve the problem that the broken screw cannot be removed. 5 models can deal with metric M4-18 or....
  • 2.SCREW RANGE USE:NO.1 M4-M6~2.2-4.6MM Drill Bits.
  • 3.SQUARE CLAMPING:The tail is square, which is convenient for the tap to clamp and manually exit the screw..
  • 4.STRAIGHT FLUTED: Directly and quickly jam the inside of the screw after drilling to facilitate the removal of the screw..
  • 5.THE SCREW TYPE IS APPLICABLE: Phillips screw, internal hexagon screw, external hexagon stud, flat screw, etc., as long as the screw thread diameter....
Check Stock

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period..
  • 3/4 FLUTE SPECIFICATION---2#: 3 flute, M5.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work..
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily..
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using..
Check Stock