ReviewsSturdy Machinery

4 x 20’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

BASE WAVE Marine Quick Release Fixed Bail Sailing Rigging Shackle (2 Pack-2'') for Sailboat

  • 【High Quality】304 Stainless Steel D Ring Shackles, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, glossy surface, solid design, abrasion resistant, strong load-bearing..
  • 【Size】1/2 inch (12mm), Max Open Width: 1" (25mm), Working Load Limit: 800kg/1763lbs, Perfect for boats, jeeps, connect loose ends of cables, chains, tow straps and snatch blocks....
  • 【Use For】12mm screw pin anchor shackles, used for coupling chain and wire rope for camping, hiking, tie downs, towing, off road recovery and sailing hardware..
  • 【Applications】D ring shackles are used of connection accessories, apply to a variety of boat or household applications, could be also used in loading and unloading of goods, mining equipment, forestry machinery, land transportation, hoisting machinery and etc..
  • 【Package Included】Pack of 6 pcs 1/2 inch -12mm screw pin anchor shackles, one-way screw, bolt design, more sturdy, easy and convenient to use..
Check Stock

2.5\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

Heyiarbeit 10mm to 10mm Shaft Coupling Aluminium Flexible Plum Coupling D30 L35 Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • [Technical Parameter] Shaft Usage: 10 mm / 0.39" to 10 mm / 0.39".
  • Total Size: 35mm x 30mm / 1.38" x 1.18" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

2 1/2 x 20 Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2 Ports Ideal for Shop Vacuums

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

5\ x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

6 x 10 6 inch diameter by 10 feet long Ultra-Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

Vktech 4 Pcs SC20UU 20mm Aluminum Linear Motion Ball Bearing Slide Bushing for CNC

  • High Quality: Made of professional aluminum material for rails, it has super wear and corrosion resistance and stable chemical properties for long time use.
  • Feature: Strong rigidity, small friction coefficient, can support smooth sliding.
  • Specification: Model: SCS12LUU, Nominal Shaft Diamter (dr): 12mm.
  • Wide Application: Widely used in printing machinery, electronic equipment,woodworking machinery, door and window machinery, packaging machinery, medical machinery and other equipment.
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month.
  • any questions feel free to contact us, we will be here for you..
Check Stock

Pack of 4Pcs 16 mm SC16UU SCS16UU Linear Ball Bearing Slider Slide Bushing For Replacement CNC

  • High Quality: Made of professional aluminum material for rails, it has super wear and corrosion resistance and stable chemical properties for long time use.
  • Feature: Strong rigidity, small friction coefficient, can support smooth sliding.
  • Specification: Model: SCS12LUU, Nominal Shaft Diamter (dr): 12mm.
  • Wide Application: Widely used in printing machinery, electronic equipment,woodworking machinery, door and window machinery, packaging machinery, medical machinery and other equipment.
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month.
  • any questions feel free to contact us, we will be here for you..
Check Stock

DTGN 20mmx20mmx1mm(LxWxT) 304 Stainless Steel Square Flat Washers - 20Pack - Good for M4 Industrial Machinery Bolt Nut - Square Gaskets - Silver Tone

  • [304 Stainless Steel Square Flat Washers]: The package comes with 20pcs of 304 stainless steel flat washers fit for M4 screws..
  • [Sturdy & Durable]: The square flat washer is made of durable 304 stainless steel, which has higher hardness, corrosion resistance, rust resistance and can be used for a long time..
  • [Features]: The flat washer is widely used to reduce friction between the screws and nuts to make them more firmly fixed. Also, it can distribute loads and increase the load-bearing surface, providing a good connection to machinery..
  • [Good Choice]: Good replacement parts for use in most machinery industries, such as various pumps, sump plugs, home and office appliance, automation equipment, electronic equipment. Also can be applied in most furniture, DIY handmade projects, etc..
  • [Notice]: Please confirm the diameter of the square flat washer before purchasing it..
Check Stock