ReviewsSubsurface Laser Machine

SCULPFUN S9 Laser Engraver, Full-Metal CNC Laser Engraving Machine with 5.5W High Precision 0.06mm Ultra-Thin Beam Diode Laser Cutter for Wood, Leather, Acrylic, Large Engraving Area 410x420mm

• ...n and accuracy, It can cut up to 15mm thick lightwood, 10mm black acrylic and carve ceramics, stainless steel and dark stone..
• 【Fast Focusing and High Accurancy】With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of SCULPFUN S9 laser engraver machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
• 【Security and Protection Designs】The laser filter cover of SCULPFUN S9 laser engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
• 【Sturdy and Easy to Assemble】The all-metal structure design makes the desktop SCULPFUN S9 laser cutter more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
• 【Widely Compatibility】The S9 laser cutter and engraver machine works well with various engraving software, such as ....

Rapala SXRTM08PF X-Rap Twitchin' Mullet Pinfish, 08

Comgrow Laser Rotary Roller, Laser Engraver Aluminum Y-axis Rotary Roller Engraving Module for Engraving Cylindrical Objects Cans, with 8mm-86mm Adjustment for DIY Laser Marking Different Size

• 【Wide compatibility】Comgrow rotary laser engraver is applicable to Laser engraving machine and 3D Priter. Work with COMGO Z1, ROBO CNC laser, Comgrow Laser Master, Creality 3D printer Ender 3 and most other brand laser engraver.Note the description in Figure 2.
• 【Easy Setup and Use】Ready to use laser rotary roller after unpacking, Connect to laser engraving machine simply by replacing Y-axis terminal, no assembling needed, smaller size to better work with most laser engravers..
• 【Perfectly matched with engraving machine to engrave round objects】The One-piece rubber laser engraver rotary, hardness up to 70A, stronger friction, allowing you to perform 360-degree engravings on round or cylindrical objects such as cups, pen,bottles, pipes, bowls, drums and tubes and over-length plate engraving or cutting..
• 【Engraving Table Height】 This aluminum rotary laser engraver has a height of 2.36”. Please ensure the space between your machine’s laser head and engraving table can accommodate this added height. Adjustable axes distance up to 3.39” to process a wide range of cylinder diameters..
• 【One-year Warranty】 Comgrow rotary engraver includes a 12-month warranty to guarantee a reliable product in good working order.We are COMGROW manufacturer....

Sweeney's S6009 Poison Moleworms 2.29 Oz

• Includes 5 active tunnel locator flags, 10 worms and 1 protective glove for safe handling of the bait..
• Uniquely formulated to be palatable to moles.
• Looks and feels like real earthworms, a main food source for moles.
• For use in underground runways or subsurface feeding tunnels.

MathRose A5 Laser Engraver CNC 20W, Laser Engraving Cutting Machine 5000mw, Fixed-Focus Eye Protection DIY Laser Marking for Metal, Wood, Leather, Vinyl, 400x410mm

• ...light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, prevent pets and children from grabbing the laser spot..
• ✅【Solid and easy installation structure design】The full-metal structure design makes the machine more solid, and improves the accuracy of engraving. The entire engraving machine adopts a modular design, which is convenient for users to assemble,repair, and replace and update machine parts. And the assembly can generally be completed within 10-20 minutes..
• ✅【Upgraded high-performance fixed-focus laser】Powerful 5W laser Laser output, the fixed-focus laser no need to adjust the focus before engraving.
• the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
• ✅【Wide compatibility & Precise scale lines axis】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS and Linux). Engraving file format support: NC, DXF, BMP, JPG, PNG, etc.There are precise scale lines on the X-axis and Y-axis....

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

• 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
• 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
• Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
• The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
• 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
• 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

• ...aver is without WiFi at first. Please check the video which below the product pictures named "Upgrade the firmware for the engraver and operate with APP". You can also contact with the seller to get the APP manual and help for updating the firmware..
• 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
• 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
• 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser cutter machine, the limit switch is automatically triggered to protect the laser and avoid collision....

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

• 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
• 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
• Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
• The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
• 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
• 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....

ATEZR P10 Combo 60W Laser Engraver with Air Assist& Rotary Roller, 430 * 430mm Working Area, 10W Laser Power CNC Laser Engraver for PC/Mobile, Hypersonic Laser for Wood/Metal/Acrylic etc.

• 【Great Value Combination - ATEZR P10 COMBO】P10 laser cutter and engraver machine comes standard with 1 air assist (KA) and 1 high density aluminum roller(KR). The 30L+/min air assist blows away the high temperature smoke generated during laser operation through the unique air duct built into the laser module, which helps to engrave more delicate models. You can use the roller to engrave objects with diameters from 2mm-150mm, such as goblets, skateboards, pencils, etc.
• 【Stability and Efficiency】The Atezr P10 laser engraving machine is made of high-density aluminum alloy. It can ensure engraving accuracy and stability even at a high speed of 24,800mm/min, and save nearly 40%-80% of working time. The engraving area of Atezr P10 engraving machine is increased to 430mm*430mm, which can engrave larger materials.
• 【Powerful Laser Technology】ATEZR P10 60w Laser Engraver has 10W laser output power. The laser focus area is reduced to 0.08*0.06mm, which can cut 10mm wood board and 6mm black acrylic at one time.ATEZR P10 laser cutter can cut up to 18mm wood board and 30mm acrylic board. It can combine precision engraving and high energy cutting. The working life of the laser module can reach 30,000+ hours.
• 【Multiple Connection Modes】ATZER laser cutti....

LE400PRO Laser Engraver, 50W High Accuracy Laser Engraving Machine with 400x400mm Large Working Area, 5.5-6W Laser Power Engraver and Cutter for Wood, Metal, Acrylic, Leather

• : LE400 Pro laser cutter and engraver adopts spot compression laser technology, and the laser focus spot is as fine as 0.08 x 0.08 mm, which makes the engraving and cutting effect very fine. The pre-assembled parts of the machine are carefully tuned to ensure the high precision of the laser's work..
• : The laser engraver machine is equipped with a laser protective cover protects your eyes without wearing goggles when you are engraving wood and metal, filter UV light for 97%. The laser protective cover adopts a humanized magnetic design, which makes the assembly easier and more convenient..
• : The focal length of the laser is a fixed value, no need to adjust the focus before engraving which traditional zoom lasers can not do! And the laser power of the fixed-focus laser is more stable. What's more, the design of using the knob to control the lifting of the device makes focusing more convenient and accurate..
• : Full aluminum alloy modular can typically be assembled in 20 minutes. The structure makes the machine more solid, and improves the accuracy of engraving. Also equipped with a convenient power switch for easy po....

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

• Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
• Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
• Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
• The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....