ReviewsSubwoofer Amplifiers

Sound Storm Laboratories CG1202 2 Channel Car Amplifier - 1200 Watts Full Range Class A/B 2/4 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 600 Watts Max x 2 @2-Ohms 300 Watts Max x 2 @4-Ohms 1200 Watts Max x 1 Bridged @4 Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers.
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
Check Stock

Massive Audio P8 Primo Series. 3,500w RMS / 7000w MAX, 0.5 Ohm Stable, Class D, Monoblock Mega Car Amplifier with Bass Boost & Clip LED

  • HIGH POWER CAR AUDIO AMPLIFIER: These high quality amplifiers are extremely powerful! This 12 volt car audio amplifier features: 1400 x 1 RMS @ 2 Ohm / 7000w x 1 Peak Power, Freq. Response 10Hz - 220Hz, Built-In OEM Line Converter, Bass Boost 0dB~12dB. Our monoblock amplifiers for cars, boats and off road vehicles provide rich clean power for your subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND: Our amplifiers are very efficient and powerful and provide you with a real value that you can hear for yourself. Our mono car subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal. This Primo P8 incorporates a clip liit switch that allows up to 16.5 Volts plus a Parametic EQ with 0 - 12 dB Bass Boost for even more customization..
  • QUALITY TESTED AND GUARANTEED TO GO BEYOND RATED POWER: Hits its full power or more all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. Also, by sensing the DC offset of a factory radio it can activate the Built-In (ATO) Auto Sensing Turn On Function (Hi-Low Converter).
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER: Don't settle for underpowered and underwhelming car stereo monoblock amplifiers! With our extra features like 12V Rem....
Check Stock

Cable Matters Braided 2-Pack Shielded Subwoofer Cable 10 ft, RCA Cable/Digital Coaxial Cable (Digital Audio Coaxial Cable and LFE Subwoofer Cable) - 3m / 10 Feet

  • Expand your audio setup with the digital audio cable for digital RCA devices.
  • Digital coaxial cable connects to a standard RCA jack on home theater systems, televisions, amplifiers, and more.
  • Coaxial digital audio cable is engineered to support demanding digital audio signals.
  • Digital coax cable is compatible with any RCA equipment port for audio or video applications and S/PDIF coaxial cable connectors.
  • LFE Subwoofer cable supports low frequency subwoofer audio for home theater systems.
  • Premium subwoofer RCA cable supports digital audio formats including PCM audio and compressed 5.1/7.1 digital surround sound (Dolby Digital Plus and DTS-HD High Resolution Audio).
  • Audio cable is compatible with both SPDIF cable connector and RCA cable connectors.
  • Digital cable coax features a premium braided cable for fraying protection, strong connectors for maximum durability, and shielding to protect digital signals.
  • Digital audio coaxial cable is the perfect companion accessory for a sound bar, A/V system, or speaker system.
  • Cost-effective 2-pack of coax audio cable provides cables for two digital audio installations.
  • SPDIF cable coaxial transmits both left and right audio channels.
Check Stock

Pump Boys and Dinettes

  • Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
  • Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs..
  • Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Onli....
Check Stock

Definitive Technology in-Wall Subamp 600 120V Amplifier (Single, Black)

  • Single high powered subwoofer amplifier for use with iwsub in-wall subwoofers.
  • Power output: 275 watts/1 channel, 230 watts/2 channels.
  • Features two discrete high power amplifiers with simple connections in one convenient Housing.
  • Provides optimal power for effortlessly driving one or two iwsubs in the same room or in different zones.
  • The high quality finish is available in silver or black.
Check Stock

BLAUPUNKT AMP4000D 4000W Max 1-CH Monoblock Class D Stereo Car Audio Amplifier

  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Strapping Capable - You are able to strap two AC4000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 15” x 10” x 2.4”, Weight: 11.2 lbs..
Check Stock

Car Stereo High to Low Line Speaker Level Converter Cable/Converter Stereo Speaker Level Adapter

  • Allows the addition of 2 or 4 channel amplifiers to most stereos without RCA outputs.
  • Allows the addition of amplifier and subwoofer to existing factory systems.
  • Adjustable level matching from 0 to 2 volts.
Check Stock

Alpine RUX-KNOB Remote Bass Level Control Knob for PDX-M12 and PDX-M6

  • Plugs directly in for quick direct subwoofer control.
  • Remote level controller for Alpine PDX and MRX Series amplifiers.
  • Easily adjust the bass gain of your amp while seated inside.
Check Stock

Speakon Speaker Cable Bare Wire Open End Cable, Speakon to Speaker Wire Audio Cord Amplifier Connection Cord for DJ/PA with Twist Lock (Male)

  • Speakon Male Speaker/Amplifier Patch Cable, Connect your Amplifiers/subwoofer to speakers, your speakers/subwoofer to audio components.Perfect for House Speakers, Subwoofers, Stage Monitors & ALL Loudspeaker Applications..
  • The Speakon Speaker Cable Connect From Banana Socket / Binding Post to Speak-on Speaker Cable. Superior wiring eliminates frustrating hums, buzzing, and crackles..
  • 14AWG Speakon Speaker Cable,100% Oxygen Copper Conductors. long-distance transmission can reduce external interference..
  • ifi sound quality: Applicable scenarios: home theater system, HIFI listening room system, stage sound system, KTV sound system, conference room sound system and more..
  • The Speakon Audio Cable is Safety withgood heat insulation,Rugged rubber-insulated exterior and sturdy construction enhances signal and performance..
Check Stock

BOSS Audio Ohm Stable Car Amplifier with Remote Subwoofer Control

  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 13.5 x 10.44 x 2.25, Weight: 7.63 lbs..
  • Warranty - BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

Planet Audio AC3000.1D Anarchy Series Car Audio Amplifier - 3000 High Output, Class D, Monoblock, 1 Ohm, Low Level Inputs, Low Pass Crossover, Mosfet Power Supply, Hook Up To Stereo and Subwoofer

  • Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 6000 Watts Max x 1 @2-Ohms Max Bridged.
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Strapping Capable - You are able to strap two AC3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Subsonic filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
Check Stock