ReviewsSump Pump Replacement

MY DIY CENTER Sump Pump Stand - Elevates & Rises Sump Pump Off Basin Floor for Flooding and Sediment Prevention - Easy to Install - Compatible With Most Sump Pump Brands - Proudly Made in USA

  • WHAT IT’S FOR - A sump pump helps remove excess water from the interior of your home. With that, a sump pump stand provides added protection and....
  • EASY TO INSTALL - All it takes is a few minutes and you can connect this stand to most brands of pumps. The built-in flow channels improve migration....
  • EXTEND YOUR PUMP’S LIFE - Regular maintenance on your pump is a necessity. Debris and sediment that collect will slowly wear down your pump’s....
  • DURABLE CONSTRUCTION - Each pump stand is made from quality, durable material that will stand the test of time. Each unit is also stackable, meaning....
  • FLEXIBILITY - The MY DIY Center Sump Pump Stand is compatible with most major brands of Sump pump..
Check Stock

Sump Pump Alarm & Protector – Monitors Your Pump Energy (HP) and Cuts Off When Dry Run, Overload or Stuck On Float Switch Detected – Works w/Out Water Level Sensors as in/Outdoor IP64 WiFi Plug

  • LESS WORRY & MORE FUN – Monitor your pump from anywhere via Wi-Fi smartphone app – no need to rush to the basement to check on it.
  • SAVE ON ELECTRIC BILL – Why Is Your Sump Pump Endlessly Running? – Get the WiFi sump pump alarm and prevent the pump burnout when the float switch is stuck in “On” position or pump is obstructed.
  • KEEP YOUR BASEMENT DRY – Get push notification alerts if there is a power outage or pump failure.
  • DETECT & PREVENT COSTLY PUMP DAMAGE – The pump protector extends your sump pump life by sensing unusual load on the pump motor and stopping the pump before an expensive breakdown happens.
  • WIDE RANGE OF APPLICATIONS – It works great with any 1/6HP to 1HP 125VAC sump pumps, submersible pumps, sewage/effluent pumps, utility pumps, water well pumps etc.
Check Stock

PumpSpy PS2000C Pre-Assembled SmartPump Combination Wi-Fi Connected 1/2HP Primary Sump Pump and 12V Battery Backup Sump Pump with Internet Monitoring & Alerts, Water Alarms for Basements

  • ...ith check valves comes pre-assembled. Homeowners who have a knack for DIY projects will appreciate the easy installation of its components. In 15 minutes, the system will be ready to use. Designed to connect to an existing 1.5" discharge line. This efficient installation requires a 15-inch diameter or a larger sump basin and 1.5" discharge pipe..
  • WITH REMOTE MONITORING & ALERTS: With Wi-Fi connectivity, PumpSpy remotely monitors the primary sump pump & backup pump performance and battery status 24/7. Every two days, there will be system & battery tests performed to ensure that the system is in good condition and ready for the next storm. Setting it up with the PumpSpy app allows you to view real-time data of your pump system's activities anywhere, anytime..
  • POWERFUL BASEMENT PROTECTION SYSTEM: This SmartPump combination consists of a primary ½ HP pump with a 7-Amp split capacitor motor that can pump up to 4,320 gallons/hour, 3,780 gallons/hour at 10 feet of lift, and has a maximum lift of 30 feet. Its 12V backup sump pump can pump up to 3,600 gallons/hour, 2,400 gallons/hour at 10 feet of lift. Pump switches are rated for 1 million c....
Check Stock

443 PS - Sump Pump Backup System

  • HOW IT WORKS: Pump Sentry will reliably power your sump pump during a power outage.
  • it automatically switches to battery when AC power goes out & will automatically recharge when power is restored.
  • FEATURES: UL & CSA accredited, this 600 Watt battery backup is compact & designed to operate most sump pumps up to 600 Watts.
  • comes with indicators for power output, battery charge, & battery replace.
  • COMPACT & DURABLE: Housed in rugged aluminum, it’s compact in size.
  • supports full pump capacity & can be easily installed – no extra plumbing or wiring needed.
  • WHAT YOU NEED: For functionality of the battery backup, connect a 12Volt deep cycle marine battery (purchased separately) with a capacity rating between 90 & 200 ampere hours.
  • BRAND PROMISE: We take pride in our rugged, built-to-last products & offer a 2-year factory warranty on our sump pump battery backup system.
Check Stock

THE BASEMENT WATCHDOG Model BW-27AGM Maintenance Free (AGM) Sump Pump Battery

  • Maintenance free – no need to add battery fluid or distilled water.
  • Up to 40-hour protection (based on a 10% duty cycle) on the Basement Watchdog Big Dog (BWD12-120C+).
  • Up to 48-hour protection (based on a 10% duty cycle) on the Basement Watchdog Special + (BWSP+) and Basement Watchdog Big Combination sump pump system (BW4000).
  • Up to 80-hour protection (based on a 10% duty cycle) on the Basement Watchdog Emergency (BWE) and Basement Watchdog Combination sump pump system (DFK961).
  • Runs various Basement Watchdog sump pump systems intermittently for days.
Check Stock

Everbilt 1/2 HP Cast Iron Sump Pump

  • HOW IT WORKS: Pump Sentry will reliably power your sump pump during a power outage.
  • it automatically switches to battery when AC power goes out & will automatically recharge when power is restored.
  • FEATURES: UL & CSA accredited, this 1800 Watt battery backup is compact & designed to operate most 3/4 Hp sump pumps.
  • comes with indicators for power output, battery charge, & battery replace.
  • COMPACT & DURABLE: Housed in rugged aluminum, it’s compact in size.
  • supports full pump capacity & can be easily installed - no extra plumbing or wiring needed.
  • WHAT YOU NEED: For functionality of the battery backup, connect a 12Volt deep cycle marine battery (purchased separately) with a capacity rating between 90 & 200 ampere hours.
  • BRAND PROMISE: We take pride in our rugged, built-to-last products & offer a 2-year factory warranty on our sump pump battery backup system.
Check Stock

Basement Sentry Automatic Emergency Backup Sump Pump System (12V Battery Powered) Provides Additional Protection Against Basement Flooding When Power Goes Out

  • Installs in sump basins along with a primary, 115V sump pump.
  • Provides additional protection against basement flooding when the power goes out.
  • Includes 12V pump, controller, alarm system, battery charger, float switch and battery box (primary sump pump not included - see Combo).
  • Works with a deep-cycle battery but Basement Sentry brand batteries recommended (sold separately - See Basement Century STB75B Battery)..
  • Basement Sentry Backup System Model STBB100.
Check Stock

Submersible Clean/Dirty Water Sump Pump 1.5HP w/water level sensor (4 ON/OFF positions, no external float switch) 4860GPH, 26'Head, Thermal Protector, Stainless Steel, Copper Winding - Schraiberpump

  • Dirty water sump pump. With High Flow . This submersible water pump.
  • is sometimes referred to as a sub pump, utility pump, aquatic pump, pool suction pump, or sump pump. Is typically used in a basin which is in your basement, garage, garden, or yard. It will automatically turn on and off when there is water. That is literally the whole point. This High Flow auto sump pump does not have an attachment for a Garden Hose. Typically these are permanently or semi-permanently installed. So you wouldn't want to waste your garden hose..
  • New water sensor technology replaces old float switch systems making it fully automatic..
  • 4 adjustable start and stop positions for the sensor, when the sensor gets wet it starts the pump, when it gets dry it stops it..
  • High quality stainless steel casing. Pumps Starts Automatically between 7.5 & 11 inches..
  • 2 year warranty with us directly. See Manual for our phone number - Premium Pumps USA.
Check Stock

Pump Sentry Battery Backup 1622 PS Sump Pump Backup System Offers Automatic Emergency Power for Sump Pump - 1800 Watt Capacity

  • HOW IT WORKS: Pump Sentry will reliably power your sump pump during a power outage.
  • it automatically switches to battery when AC power goes out & will....
  • FEATURES: UL & CSA accredited, this 1800 Watt battery backup is compact & designed to operate most 3/4 Hp sump pumps.
  • COMPACT & DURABLE: Housed in rugged aluminum, it’s compact in size.
  • supports full pump capacity & can be easily installed - no extra plumbing or....
  • WHAT YOU NEED: For functionality of the battery backup, connect a 12Volt deep cycle marine battery (purchased separately) with a capacity rating....
  • BRAND PROMISE: We take pride in our rugged, built-to-last products & offer a 2-year factory warranty on our sump pump battery backup system.
Check Stock

PumpSpy 2000W Primary Sump Pump Backup Power System, Safe Back Up System for Emergency and Power Outage, Superior Home Silent Sump Pump Backup Power Supply with Intelligent Cooling

  • CUTTING-EDGE TECHNOLOGY: The Primary Sump Pump Backup Power System provides overcharge prevention. Once fully charged, the battery is maintained with a “trickle charge” to ensure it remains fully powered and ready for use. This item also includes a smart cooling feature for enhanced safety and extended life expectancy..
  • HIGH PERFORMANCE: Never again worry about your basement during power outages! Our efficient backup unit generates a Pure Sine Wave 120 VAC voltage that is cleaner, quieter, and more stable. It has a 2000 Watt output and can power two primary sump pumps simultaneously with a combined current draw not exceeding 16.6 Amps..
  • EXCELLENT RELIABILITY: The Primary Sump Pump Backup Power System safely and effectively powers your sump pump during a power outage. When the AC power fails, it switches to battery power and instantly recharges when the power comes back on. For convenience, it has two grounded outlets and a USB Charge Port..
  • STURDY CONSTRUCTION: We build our items to last and take great pride in our product’s quality. This item is assembled, tested, and packaged in Kalamazoo, Michigan, with both domestic and imported parts that are CE-certified for electrical safety compliance. It measures 17.5 x 6.75 x 4 inches and weighs 10.5 pou....
Check Stock

PumpSpy Dual Pump Install Kit - Double Sump Pump Connection, Basement Water Pump Backup Y-Connector - Sump Pump Submersible Backup Connector To Single Discharge Line - Dual Pump System To 1-1/2' Line

  • EASY INSTALLATION: Installing a backup sump pump can be tedious but not with the PumpSpy Dual Pump Install kit! This kit comes with everything you need to connect 2 sump pumps together to a single discharge line. All you’ll need for the process is a standard screwdriver. Install your pumps in a fraction of the time..
  • IDEAL SAFEGUARD SYSTEM: A flooded basement can cost thousands of dollars in damages. The best way to protect yourself from this kind of disaster is with a backup sump pump. This dual water pump installation kit makes it easier for you to install a backup system to avoid what could potentially be a major inconvenience..
  • HASSLE-FREE SET UP: There’s no cutting or gluing required during installation with this dual pump backup installer kit. Everything you need to connect a back up sump pump is in the box. There’s no need to purchase a PVC pipe, elbows, couplings and cement. Say goodbye to messy, laborious installations!.
  • WHAT’S IN THE BOX: This kit contains a Y-Connector, Two (2) 1-1/2″ Threaded Silent Check Valves, Stainless Steel Clamps and Buna-N Rubber Couplings. The only thing you’ll need to put everything together is a standard screwdriver. This kit is compatible with all pumps that have a standard 1-1/2″ NPT pump discharge/....
Check Stock