ReviewsSunk Costs

Dimebag Hardware Skateboard Mounting Nuts and Bolts 1 Phillips - Skateboard Truck Hardware - Lots of Colors Rasta

  • One (1) set of Dimebag 1" mounting hardware.
  • Set includes eight (8) bolts and eight (8) lock nuts.
  • Made of high-grade steel and have reduced, rounded heads and counter sunk for less board stress..
  • The top part that is inside the wood and truck holes (shoulder) is not threaded, so the bolt fits snugly and has less vibration, which keeps the nuts....
  • Keep your board looking fresh and keep those trucks locked on tight with Dimebag Hardware!.
Check Stock

Paslode Framing Nails 650381 HDG 30 Degree Round Head 2 inch x .113 Gauge 2,000 per Box

  • Powerful - Reinforced round head design for better drive performance in the hardest materials. Nail driven flush to communicate consistent nailing.
  • Protective - Polymer coating on nail head reduces staining and streaking by 80% compared to traditional Hot Dipped Galvanized Nails.
  • Productive - 10% more nails per strip means less reloading.
  • Compatability - Paslode nails are optimized to work with Paslode tools.
  • Cleanliness - Paper tape collation means no job site debris to clean up.
Check Stock

Bulldog Winch 10039 Trailer Winch (12000lb Trailer with 90 Ft. Wire Rope, Roller Fairlead, Mounting Plate, Low Profile), 1 Pack

  • All in one design, Includes mounting plate with counter sunk Bolts for easy flat deck mounting..
  • Fairlead mounts to plate above deck level..
  • Includes spring Steel tension plate for wire rope for easy rope management and spooling..
  • 2-in-1 controller: wired controller with 20 ft. Lead also can be Switched to wireless mode with lead unplugged.
Check Stock

SuperATV Scratch Resistant Full Windshield for 2020+ Kawasaki Teryx KRX 1000 | Made of 1/4\ Polycarbonate-250X Stronger Than Glass | Hard Coated | Protects Against Debris | USA Made!

  • All models are fork mounted except: 55-7704 and 55-7705.
  • Chrome fork mounts and counter-sunk hex bolts.
Check Stock

Lot 4 Each 24 Aluminum T Track 3/4 by 3/8 Slot Accepts 1/4 Hex Bolts 1/4 and 5/16 T Bolts Countersunk Holes Every 6 112114

  • Lot of 4 each 3/4” wide x 3/8” high x 24” long T Track.
  • Thick .100” sidewalls minimize bowing and twisting.
  • Uses standard 1/4" hex heads, 1/4" T bolts and 5/16" T bolts.
  • Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Screws not included..
Check Stock

12\ Black Powder Coated Steel Granite Quartz Counter Top Hidden Support by Smoove Steel with 8 Bonus Screws(2)

  • INCLUDES 8 BONUS SCREWS - Screws included.
  • THIN BUT MIGHTY - 1/4" thick Low Profile Counter Top support. No Corbel needed. Supports a 250 lb load per bracket when installed correctly.
  • HIDDEN SUPPORT - Install under the countertop and no need for knee-wrecking brackets. Rounded front for a better look and no snags.
  • INDOOR OR OUTDOOR USE - All our powder coated hidden countertop brackets are rated for interior or exterior use.
  • FLEXIBLE INSTALLATION - Large mounting holes that are counter sunk for multiple screw options.
Check Stock

Hyever 3 Pieces Flat Straight Brace Bracket Steel Metal Mending Fixing Plate,Brushed Finish 5.4' × 1.9' × 0.08'

  • Strong：Made of 0.08" thick stainless steel material. The force of the mending plate is extraordinary, Strong and durable..
  • Attractive and Durable: Anti-corrosion，antiwear, oilproof, beautiful metal texture. Surface stainless steel brushed finish..
  • Perfect: Sunk hole design make the screws head will not protruded after installation. It's beautiful and perfect to mending and brace your furniture..
  • Safe: Round and smooth edge. The metal flat mending plate does not scratch your hand..
  • Dimensions: 137mm(5.4") x 49mm(1.9") x 2mm(0.08") (L×W×T)..
Check Stock

4 x 30 Return Air Grille - Sidewall and Ceiling - HVAC Vent Duct Cover Diffuser - [White] [Outer Dimensions 5.75w X 31.75 h]

  • 4"w X 30"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 5.75" Width X 31.75" Height - SEE IN DESCRIPTION....
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment.
  • Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow.
Check Stock

Rugged Ranch TRIPLEX RuggEgg Barn Wooden Chicken Coop Triple Nesting Egg Boxes for 3 Hens or Chickens, Natural Brown (2 Pack)

  • NECESSARY SHELTER: 2 pack of chicken coop nesting boxes provide your chickens with space for both solitude and community.
  • 3 NESTING BOXES: Wooden chicken coop with 3 individual nest boxes.
  • DURABLE DESIGN: Made from lightweight and durable plywood.
  • EASY TO INSTALL: Pre-drilled frame with counter-sunk holes allows for easy installation.
  • TAKE CARE OF YOUR BIRDS: Makes sure your chickens have all their needs met.
  • Dimensions (L x W x H): 36 x 12 x 12 inches.
Check Stock

Bulldog Winch 15020 Trailer Winch (4400lb Trailer/Utility with 50 Ft. Synthetic Rope, CNC Billet Aluminum Hawse Fairlead, Mounting Plate, Low Profile), 1 Pack

  • All in one design, Includes mounting plate with counter sunk Bolts for easy flat deck mounting..
  • 20 ft. Wired controller for use at the back of most trailers, wireless control optional with addition of 20212.
  • Low profile & compact design – will fit into a 20″ box/cabinet..
  • 50 feet of synthetic rope on a narrow drum is long enough for most trailers and makes spooling easier..
  • Fairlead mounts to plate above deck level..
Check Stock

10 w X 10 h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions 11.75 w X 11.75 h]

  • 10"w X 10"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75" Width X "w X 11.75" Height - SEE BELOW IN....
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment.
  • Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow.
Check Stock