ReviewsSuper 8051

Wahl Professional Pro-Set Tool for Adjusting Trimmer Blades on the 5-Star Detailer Retro T-Cut and Cordless Detailer Li - Model 3315

This standard replacement blade is designed to fit the Wahl Detailer #8290, The 5 Star Razor Edger #8051, G-Whiz #8986, and Hero #8991, and the....
The Adjustable T Shaped Trimmer Blade is intended for professional use only and is designed to deliver the sharp performance that experts demand..
This blade is specifically designed to provide an extremely close trim. It creates a crisp, clean line that will keep your customers coming back. The....
Ideal for facial hair and design, it allows you to get creative while keeping clean lines. The t-wide blade is 1/4" wider than Wahl's standard....

Check Stock

Wahl Professional Adjustable T Shaped Trimmer Blade for Detailer 5 Star Series Hero Razor Edger and G Whiz and Sterling Definitions Trimmers for Professional Barbers and Stylists - Model 1062-600

PROFESSIONAL PRECISION: From Wahl Professional's commercial grade line of products, the Adjustable T Shaped Trimmer Blade delivers the sharp....
FITS YOUR FAVORITES: This blade is designed to fit the Wahl Professional Detailer (8290), 5 Star Series Hero (8991), Razor Edger (8051) and G Whiz....
PRODUCT SPECIFICATIONS: Package contains 1 Wahl Professional Adjustable T Shaped Trimmer.
Silver in color, includes blade oil, screws and....
PLEASE NOTE: Due to continuous improvement, the product appearance may slightly vary from the product images on this listing.

Check Stock

Standard Premium Blade set Adjustable 2 hole Replacement Blade #2215 for Wahl Detailer Corded Wahl Detailer Cordless 5 star Series Detailer 8081 Double Gold Blade

COMPATIBLE CLIPPER BLADES: This standard replacement blade is designed to fit the Wahl Detailer #8290, The 5 Star Razor Edger #8051, G-Whiz #8986, and....
High-quality materialsl: Carbon-steel for dependable, ceramic blade , Close-cutting T-blade,Sharpness blade for smooth cutting ..
✔ It's intended for professional/daily use, great for Professional Stylists and Barbers, for hair cutting-Fades, Tapers, Flat Tops Performance. Time....
✔ ACCURATE Zero Gap: This blade is designed to provide an extremely close trim. Sharpness blade for smooth cutting Ideal for facial hair and design.....
Easy installation:This replaces the small moving cutter blade. Can also be used to upgrade steel blades to ceramic blades. Simply replace the steel....

Check Stock

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi

5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
Equiped with high-current relay, AC250V 10A.
Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.

Check Stock

Professional T Wide Replacement Blades Set #2215 for Wahl Hair Trimmers 8081 Assembled 1 Fixed Carbon Steel Blade with 1 Ceramic Moving Blade Compatible with Wahl 5 Star Detailer Gold

➤Fits Model: for 5 Star Wahl Detailer #8290,#8081, for 5 Star Razor Edger #8051, for G-Whiz #8986, Hero #8991, for Sterling Definitions #8085..
➤Professional Precision: The double wide Adjustable Trimmer Blade set is intended for professional use only and is designed to deliver the sharp....
➤Accurate Zero Gap: This blade is designed to provide an extremely close trim. Sharpness blade for smooth cutting Ideal for facial hair and design.....
➤Direct replacement for a proper fit and easy installation, quality materials used, 100% tested before shipping..
➤Packing: contains Professional Double Wide Adjustable Trimmer Blade set. Not include the screw..

Check Stock

ACEIRMC Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE R3 for MEGA2560 Nano

Received great ideas from our customers and adopted in this upgraded kit. Removed useless modules heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc..
Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. or download the tutorials online from the official website..
100% compatible with Arduino official IDE, Raspberry Pi and STM32..

Check Stock

AITRIP 1PCS 8 Channel 5V Solid State Relay Module Board High Level Trigger Compatible with Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC (1PCS)

Solid State Relay Module Board has been assembled, and electrical test passed.
Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch).
Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON).
Load voltage range: 75 to 264VAC (50/60Hz).
Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.

Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.

Check Stock

AOICRIE Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible for IDE R3 MEGA2560 for Nano, Starter The RFID Learn Suite Kit LCD 1602 for R3

37 Sensors Assortment Kit for Arduino MCU Education.
RFID Starter Kit for R3 Upgraded version Learning Suite With Retail Box Upgraded Version of Starter Kit RFID Stepper Motor Learning Kits with a CD for starter learning !!!.
Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
Great sensor kit with tutorials compatible for raspberry pi, Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, There are tutorials in the CD that comes with. or download the tutorials online from the official website..

Check Stock

T-Outliners Replacement Blades, T Outliners Hair Trimmer Clippers Blade for Andis GTO, GO, SL and SLS Model (2 Ceramic T Blade + 2 Black Steel Blade + 4 Limit Combs + 1 Cleaning Brush) (Green)

This standard replacement blade is designed to fit the Wahl Detailer #8290, The 5 Star Razor Edger #8051, G-Whiz #8986, and Hero #8991, and the Sterling Definitions #8085..
The Adjustable T Shaped Trimmer Blade is intended for professional use only and is designed to deliver the sharp performance that experts demand..
This blade is specifically designed to provide an extremely close trim. It creates a crisp, clean line that will keep your customers coming back. The extended blade cutting area produces faster results for ultimate efficiency. Ideal for facial hair and design, it allows you to get creative while keeping clean lines. Adjustable with zero-overlap capabilities.
deal for facial hair and design, it allows you to get creative while keeping clean lines. The t-wide blade is 1/4" wider than Wahl's standard t-blade. Adjustable with zero-overlap capabilities..

Check Stock