ReviewsSurface Coating Boring Bars

Fitness Republic Weighted Bar Sculpting Workout Bars for Exercise | Body Bar Balance Bar, Strength training bars weighted exercise bar set for Physical Therapy, Body Toning Set (6lb, 8lb, 10lb, 12lb & 14lb)

  • 100% RELIABLE AND ENDURING HEAVY-DUTY CONSTRUCTION - Heavy duty construction, fixed barbell are made of solid, high quality material - 47 inches long, highly tough, durable and exceptionally stable. Doesn't break or bend due to repetitive use.
  • LOSE WEIGHT AND BURNING CALORIES - Exercising with Fitness Republic weighted bars for exercise - weighted barbell help you burn more calories and toning body shape. Perfect for Physical Therapy, Aerobics, Yoga and Pilates.
  • COLOR CODED WITH ROUND END CAP - Different color coded cap for easy identification of weight lifting bar set. Special round shaped heads prevent foam coating from scratches.
  • PADDED FOAM SURFACE FOR EASY USE - Our body sculpting bars are constructed of high-quality padded foam surface for comfortable in use and prevent slipping even with sweaty hand.
  • WIDE WEIGHT RANGE - All fitness body bars weighted bars are 47-inch long, at different diameters (from 1.2-inch to 1.8-inch) for different weights. Each bar has a 2 inch diameter and 47 inch length.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...s sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

APS Premium 4in Black iBoard Running Boards Compatible with Silverado Sierra Double Cab 07-18

  • EASY TO INSTALL - iBoard package includes set of 2 black running boards, mounting brackets & hardware for an easy bolt-on installation.
  • Massive 4-inch Wide Solid One Piece Bars, Provides a Wider step area for Secure Footing..
  • Polished 6061 Aircraft Aluminum Boards with Matte Black Power Coating, Best Rusting and Corrosion Resistance Compare to Other Brand Steel Bars on the Market..
  • iBoard Surface Covered with Full Length, Premium Quality UV Resistant Non-Slip Top..
  • Rocker Panel Mount, Compatible with Chevy Silverado GMC Sierra 2007-2018 Double Extended Cab & 2500 3500 2019 (Exclude 07 Classic).
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

  • ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction:right hand..
  • ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

  • ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction:right hand..
  • ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...s sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

KKoneAuto 6Inch Running Boards Compatible with F150 Crew Cab 2015-2021 & F250/F350 Super Duty Crew Cab 2017-2021 Aluminum Side Steps OE Style Nerf Bars Step Bars, Black

  • ...smanship is used for the step bars, greatly enhance the stability of the boards. Its rugged frame and mount design for strength allows weight up to higher 500lbs on each bar, no worry about its bearing capacity. They support long time use to your beloved car..
  • 【 Non-slip Surface 】- Slip-resistant textured surface is properly applied to the running boards, prevents slipping and withstand the harshest weather conditions efficiently. Premium powder coating increases surface friction, ensures that use the side bars safer. Besides, it is elegant decoration for your vehicle as well..
  • 【 Angled Cushioning Design 】- Slope design on the short side of F50 running boards perfectly match with your truck’s chassis, it can effectively give the maximum safety for your feet. The angled design also brings technological and beautiful decoration to your vehicle, making your truck never dull..
  • 【 No-drill Installation 】- Brackets feature precision injection molded trim covers for a tougher look, perfect polished design protects you and you car from harm when install. No drilling required, just bolt-on and easy installation to save ....
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction:right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

AUSHEN Ironing Board Cover and Pad Extra Thick Padding Silver Coated Scorch and Stain Resistant 15 x 54 inch Replacement Iron Board Cover with Elastic Edge 4 Fasteners 1 Protective Scorch Mesh Cloth

  • EXTRA THICK FELT PAD - This Ironing Board Pad is made of 3 layers - silver coating cotton surface, thick foam padding, 100% natural breathable cotton. Perfect thickness to avoid ironing board marks on clothes, creates ultimate ironing surface. It makes the boring ironing work easy and enjoyable. This cover is stain & scorch resistance. The heavy duty padding for exceptional durability. Outlasts similar board covers that lack the scorch resistant silver coating..
  • PERFECT FIT FOR STANDARD SIZE IRONING BOARDS - This ironing cover is designed to fit boards that measure 52" to 54" in length and 13" to 15" in width and features 3mm thick foam padding plus extra felt for additional support. Good Elasticized edge with non-slip nose pocket design firmly secure the ironing board covers all round and stays in place at all times. 4 fasteners to secure even more and to make surface smoother. Never worry about the sliping of the board pad and leaving edges exposed.
  • IRON YOUR CLOTHES FASTER AND BETTER - Top layer with silver coating helps to reflect a huge part of the heat back to the clothes. It can reduce the ironing time in half while getting wrinkle-free clothes. It also absorbs less water than regular covers. Youll notice how our ironing board covers eliminate ....
Check Stock

Rack Mounting Bracket Compatible with GoPro

  • DURABLE AT ITS FINEST: This Front Runner Rack Mounting Bracket Compatible with Go Pro is Made from 3mm steel. Black powder coated in the same resistant coating as the Slimline II rack..
  • PERFECT FOR ADVENTURE: Out for an adventure? Easily mount your GoPro action camera to your Front Runner Slimline II Roof Rack or Load Bars using this sturdy bracket..
  • QUICK AND EFFORTLESS: This Front Runner bracket allows you to mount your GoPro action camera effortlessly and quickly to your Slimline II roof rack or load bars..
  • DIMENSIONS: 25mm (1") L x 18mm (0.7") W x 33mm (1.3") H consists of 1 x GoPro Rack Mount Bracket, Installation Hardware and Fitting Instructions..
  • INSTALLATION AND FITTING: The GoPro Rack Mounting Bracket can be mounted on any surface that will accommodate an M8x16 HEX Bolt to be fitted.Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock