ReviewsSurface Mount Lights

Nilight 6 Gang Rocker Switch Box 12V SPST ON Off Switch QC 3.0 USB Charger Voltmeter Waterproof Aluminum Rocker Switch Panel Night Glow Stickers for Boats Cars RVs Trucks 2 Years Warranty

  • ...nable you charge two devices simultaneously at full speed. It works for all USB-powered devices. Makes the charger 40% faster than conventional chargers.
  • The voltmeter is built in the center of the USB charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles..
  • Surface Mount: With surface mount enclosure. The box can be mounted either on the dash board, under dashboard, middle console or anywhere on the car. The bracket can be adjusted 360 degrees.This gives you more mounting options..
  • Wide Application: The switches allows you to control up to 6 different devices,such as Led Light Bars, Rear Lights, Rock Lights, Windshield Lights,Off road Lights, Sasquatch Lights, Zombie lights and Wench power, etc. The complimentary transparent and night glow stickers enables you to DIY the switch according to your preference..
Check Stock

Nilight 4 Gang Rocker Switch Box 12V SPST ON Off Switch QC 3.0 USB Charger Voltmeter Waterproof Aluminum Rocker Switch Panel Night Glow Stickers for Boats Cars RVs Trucks, 2 Years Warranty

  • ...at full speed. It works for all USB-powered devices. Makes the charger 40% faster than conventional chargers.
  • The voltmeter is built in the center of the USB charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles..
  • Surface Mount: With surface mount enclosure. The box can be mounted either on the dash board, under dashboard, middle console or anywhere on the car. The bracket can be adjusted 360 degrees.This gives you more mounting options..
  • Wide Application: The switches allows you to control up to 4 different devices,such as Led Light Bars, Rear Lights, Rock Lights, Windshield Lights,Off road Lights, Sasquatch Lights, Zombie lights and Wench power, etc. The complimentary transparent and night glow stickers enables you to DIY the switch according to your preference..
Check Stock

1x4 Surface Mount Kit for LED Flat Panel Light - 4 Pack 12x48 inch Aluminum Ceiling Flush Mount Frame Kit Easy to Install White Coating

  • ✅【1x4ft Universal Surface Mount Kit】 - 1'x4' surface mount kits are an accessory designed especially for 1x4 Edge-Lit Flat Panels. These kits....
  • ✅【Direct to Mount LED Panel Lights in Locations without T-bars or Lay-in Ceilings】- No need to saw off the ceiling, reducing labor time and....
  • ✅【Mounting Hardware Included & Assemble Firmly】 - LED 1x4 surface mount kit and screws required for installation. Flush set screws holds all....
  • ✅【Easy to Assemble for Quick Field Installation】 - Simply install three of the four plates provided on the ceiling, slide the LED panel in, and....
  • ✅【Gloss White Powder Coat Finish Ensures Maximum Rust Prevention, Durable Frame】- Made of high quality extruded aluminum construction.
Check Stock

Partsam 10Pcs 6.2 Inch Red LED Trailer Side Marker Lights 12 LED Surface Mount Sealed Clearance Indicator Lights Lamps Waterproof Chrome Bezel Turn Signal Trailer Bus Universal Ultra Flat Clear Lens

  • ... (W) x 0.5" (H) and 4.0" between mounting holes( measured center-to-center).
  • This flush mount led light are hardwired with 2 wire pigtails: Black is ground and red is positive. Easy to install and looks great on your bumper, cab-and-sleeper kits, fender guards, everywhere else you can imagine.
  • Functions: these surface mount led lights can be work as trailer lights, led marker lights, side marker lights, led clearance lights, side cab panel lights, fender lights, indicator lights, truck lights etc. These red led lights are universal for 12V DC vehicles, esp. the heavy trucks such as Peterbilt, Kenworth, Freightliner etc..
  • Warranty: We truly offer 1 year warranty for these oval Flat red Marker LED Trailer Lights! If have any questions or issues about our flat line led lights, Please feel free to us and we will reply in 24 hours.
Check Stock

Partsam 20Pcs 2\ x 4\ Double Bullseye Led Marker Lights 10 diodes Surface Mount Sealed Rectangle Rectangular Led Trailer Marker Clearance Lights Waterproof 12V

  • Package includes 20 Pieces double bullseye led marker lights (10 Amber lights + 10 Red lights). Each trailer marker light includes 2 pieces stainless steel screws for surface mounting.
  • Each led markers boasts 10 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamp, sonically sealed polycarbonate lens and weatherproof housing.
  • About 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1".
  • The rectangular led light features a replaceable, snap-on lens. The white base surface mounts on standard 3" centers, and the two-wire design includes the lead and ground wires to mount to any surface: black is ground and red is positive.
  • This double bullseye LED light can be used as a clearance or marker light.
  • These LED marker lights have the "double bullseye" design just like the marker / clearance lights on Airstreams from 1969 and many later models.
  • These trailer lights go by a few different names - tiger eye led lights and double bubble led lights are the most common ones that we hear. This is a nice-sized side marker light for anywhere on the truck.
  • Different form many bullseye lights selling on the market, The wires do not exit from the middle but form the corner.
  • These 12V rectangle LED lights are univer....
Check Stock

4 Pieces Aluminum Trailer License Plate Bracket Holder with Light Mount for Trailers Trucks Cars Motorcycles

  • Size information: aluminum license plate bracket measures approx. 9.5 x 5 x 0.6 inch, the thickness is approx. 1.58 mm, weights approx. 2.30 oz, designed for replacing your plastic license plate bracket.
  • Detailed information: 2 top mounting holes have 1.5 inch inner and 2.4 inch outer distances, bottom license plate slots have 4 inch inner and 8.5 inch outer distances, bottom section has 0.6 inch offset.
  • Durable to use: made of sturdy and rustproof aluminum alloy with well-polish surface, the front and back sides of aluminum alloy tread surface are covered with blue film to protect the surface, please peel off the film before installation.
  • Practical to use: suitable for stud mount lights or combination tail lights and stop lights.
  • Widely applied: compatible with most trailers, such as motorcycle, boat, transport, construction, snowmobile, etc..
Check Stock

Lutron Aurora Smart Bulb Dimmer Switch for Paddle Switches | for Philips Hue Smart Bulbs | Z3-1BRL-PKGD-WH | White

  • PROBLEM SOLVER: Philips Hue smart bulbs only work if the switch is in the ON position. The Aurora Smart dimmer switch keeps Philips Hue smart bulbs in ‘ready mode’, so you always have control of your smart bulbs.
  • PADDLE SWITCH SOLUTION: Converts an existing paddle or decorator switch into a smart bulb dimmer switch using included mounting bracket and wallplate.
  • STAYS CONNECTED: Aurora maintains connection with Philips Hue smart bulbs, even if the Wi Fi goes down, so that you always have control over your lights.
  • ANYONE CAN USE: Allows for anyone to adjust your Philips Hue smart bulbs at the wall, no app required.
  • RECOGNIZED AESTHETIC: Rotary knob easily provides the perfect lighting level.
  • tap to turn lights on/off, or rotate to dim/brighten lights.
  • SIMPLE SET-UP: Replace existing paddle switch with wallplate bracket.
  • simply remove existing paddle switch, cap wires and push into backbox and mount the wallplate bracket.
  • MOUNT ANYWHERe: Use the mounting bracket to mount Aurora on almost any surface - no cutting holes or pulling wire required.
  • PACKAGE INCLUDES: (1) Lutron Aurora Smart Bulb Dimmer, (1) Wallplate Bracket for Paddle Switches, and (1) wallplate.
Check Stock

RV Interior LED Puck Light, 12V Surface Mount Ceiling Dome Light, 12 Volt Overhead Down Light for Camper Van Coach Travel Trailer Boat Truck Caravan Interior Lighting, 4 Pack (4000K Neutral White)

  • LOW PROFILE – Very slim and lightweight LED puck light, thickness only 7/8”. Slimline design is perfect for RV boats interior lighting.
  • EVEN LIGHTS – Adopt optimized LED chips array and dedicated glare control frosted PC lens, it casts even diffused cozy lights.
  • SURFACE MOUNT – Easy to install, use 3 screw to mount light on flat surface, screws concealed under light cover, very clean looking.
  • DIMMABLE – Works with Obeaming 12v dimmer to smoothly create high low light ambiance and save battery drain. Dimmer sold separately.
  • VERSATILE – It widely used in RV boat interior lighting, great for ceiling, kitchen, under cabinet, dinette, bunk bed, bedside, etc..
Check Stock

Linkstyle 10pcs 6LED Trailer Marker Lights, 12V-24V Amber/Red Surface Mount Clearence Light, 2.5 inch Waterproof Sealed Side Marker Indicators Light for Front Rear Trailer Truck RV Camper Boat

  • UNIVERSAL FUNCTIONS: These trailer marker lights surface mount design for side marker lights, clearance lamps, roof lights and identification light.
  • Universal fits 12V-24V vehicles like trucks, trailers, RV, campers. (Note: Please install on a smooth surface. The actual size of the product will be different from the picture, please check the specific size of the product before buying).
  • HIGH BRIGHTNESS: Each upgrade marker light is built in 6 diodes. Output ultra-bright red or amber light which reflecting clearly lights around in the dark to warn the upcoming car to reduce accidental ricks.
  • EASY INSTALLATION: Two-wire design which comes out from the center of the light including both lead wire and ground wire for easy to mount to all surfaces and fixed by the screw on both sides.
  • (Note: different color light: the amber light with yellow & black wire, Black is Negative while Yellow is Positive.
  • the red light with red& black wire, Black is Negative while Red is Positive).
  • IP67 WATERPROOF: Sealed & waterproof assemblies.
  • IP67 waterproof clearance light can be ready for a different kind of weather attack, dust, dirt, snow and other impacts of inclement weather, which alerts other vehicles to avoid accidents..
Check Stock

Safego 2-Pieces 50W 3Ohm LED Load Resistors - LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights or DRL, Fix Hyper Flash Error

  • Easy Installation -LED load resistors installs easily. Simply connect one wire of the resistor to the ground and the other one to the positive wire.Please apply the provided quick wire clip so you don’t have to cut any existing wires. Attention - Load Resistor gets very HOT when working, please mount it on metal surface. Do not mount on plastic surface, hose or painted surface to avoid melting..
  • Package: 2Pcs (1 Pairs) 50W 3 ohm Load resistors with 4Pcs T-Taps.We offer "ONE YEAR" warranty, LED load resistors works on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb. One LED resistor is required for each turn signal bulb or each license plate light bulb..
Check Stock

Ancona AN-1558 30\ 280 CFM Convertible Wall Mount Pyramid Range Hood in White

  • Wall-Mount Range Hood: This Ancona range hood combines exceptional performance with easy-to-use features and a design that will beautifully complement any kitchen!.
  • Stainless Steel Range Hood: Professionally engineered in high grade 430 stainless steel, this range hood comes with aluminum mesh core filters that are dishwasher safe..
  • Kitchen Range Hood: Our state-of-the-art 3-speed push button controls combined with our powerful independently tested motor will effectively eliminate smoke, moisture, and cooking aromas leaving the air in your kitchen pure and fresh..
  • Pyramid Range Hood: This expertly designed wall-mount pyramid-style range hood features Pure Lights, Ancona’s long-lasting eco-friendly LED lights to illuminate your cooking surface at a fraction of the cost of conventional lights..
  • Size and Other Details: The dimensions of the kitchen range hood are 29.3” x 19.6“ x 39.3”. It contains a top venting application (Round 6 in.) and can be converted to an internal recirculation unit with the purchase of a conversion filter kit (sold separately)..
Check Stock