ReviewsSurface Plate Leveling

Pangea Audio LS300 All Steel Floor Bookshelf Speaker Stands Pair (24 Inch)

  • Super-rigid all-steel construction speaker stand supports a wide range of bookshelf-, monitor- and rear channel-type loudspeakers.
  • Three large diameter steel support columns arranged in a triangular shape are coupled to steel top and bottom plates forming an incredibly rigid platform for enhanced speaker performance.
  • The 6” by 6” steel top plate matches a wide range of speakers.
  • the 10” by 12” heavy gauge steel base plate combined with four adjustable steel cone point spikes provide excellent stability and easy leveling on any surface.
  • One steel column has openings at the top and bottom to hide speaker cables and two columns can be sand- or shot-filled for even better vibration damping.
  • Four soft top pads supplied for speaker isolation.
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

Kanto F3760 Fixed TV Wall Mount for 37-inch to 70-inch TVs

  • SAFE & SECURE - Supports TVs weighing up to 150 lb, with VESA sizes from 50x50 to 600x400..
  • LOW-PROFILE DESIGN - Allows your TV to sit 1" from the wall..
  • HORIZONTAL ADJUSTMENT - Shift your TV left or right across the wall plate to achieve the ideal viewing position..
  • QUICK-RELEASE CORDS - Pull on the cords to easily detach your TV from the wall plate..
  • LEVELING SCREWS - Two leveling screws can be adjusted to ensure your TV is perfectly aligned..
Check Stock

Official GEEETECH Mizar S Auto-Leveling 3D Printer, Fixed Heat Bed with 10.0' x 10.0' x 10.2' Large Printing Size, Dual Z-axis FDM 3D Printer with Ultra Silent Board for Beginners and Home Users

  • 【Precise Auto leveling】GEEETECH Mizar S is the only printer with the dual-leveling system, which enables one-button ABL automatic bed leveling technology. Equipped with a high-precision leveling sensor and no need for external leveling accessories like BL touch. Mizar S also creatively designed GML manual leveling mode, which is more friendly to beginners, amateurs and specialists..
  • 【Stable Magnetic Platform】The heat bed adopts a fully fixed design, the aluminum plate is fixed on the bracket with 12 screws, you only need to adjust the height of the nozzle when leveling, the bed won't deform due to temp changes, which also solves the problem of unstable printing caused by loose nuts. The platform is a magnetic plate + steel sheet design, which has stronger adhesion and easier to remove the models..
  • 【Large Build Volume & Dual Z-axis 】GEEETECH Mizar S 3D Printer achieves a bigger print size of 255 x 255 x 260mm / 10.0 x 10.0 x 10.2 inches, giving you enough space for creative design. Double Z Axis screw design can effectively improve the printing quality and make your models more delicate..
  • 【Super Silent Driver】The Mizar S motherboard uses a high-performance 32-bit MCU with faster printing speed. TMC2208 silent driver can effectively reduce....
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

FlashForge Finder 3D Printer with Cloud, Wi-Fi, USB for Education and Family Use (Yellow)

  • Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily. At the same time, it can minimize damages or offsets to the build plate..
  • The patented nozzle structure has been upgraded several times and the wire is more even and smooth, which all improve the surface quality of model and lower risks of extruder jams..
  • Finder features an intuitive calibration detection system to assist leveling. you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise..
  • Out of box,lower energy.A fun STEM educational experience in mechanical engineering and electronics..
  • Flashforge 3d printer Finder,12 months warranty, lifetime technical assistance and 24 hours professional customer service..
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300°C High-Temperature Nozzles,Sprite Metal Direct Extruder,Removable PEI Spring Platform,CR Touch Auto Leveling,LED Light,Print Size 8.6×8.6×10.6in

  • ... Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey..
  • 【CR Touch Auto Leveling & 4.3-inch Color Touch Screen】: Equipped with CR Touch, the 16-points automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. The 4.3-inch color touch screen enables click-to-control. It supports the switch among nine languages, making the printer more manageable for people from various regions worldwide. Therefore, Ender 3 S1 Pro is friendly, especially for 3D printing beginners..
  • 【Removable Spring Steel PEI Build Plate】: The build surface of Ender 3 S1 Pro is covered by a PEI spring steel build plate, which is durable. It not only has good adhesion to the printed models but is also bendable, enabling a slight flex to remove the print. In this way, no need to worry about model toppling or the difficulty to remove the print, Ender 3 S1 Pro helps solve these problems for users..
  • 【LED Light & Human-centered Design】: A LED light strip is ....
Check Stock

Nefish 4 Pack Leveling Casters Heavy Duty for Workbench 2200 LBS Capacity, Upgraded Handle Design Retractable Caster Wheels Set of 4, 360 Degree Swivel Castors for Machine, Equipment, Shelves

  • 【Roll Heavy Equipment with Ease】 - Without built-in wheels in heavy equipments, moving it from this side of your workspace to another could prove to be a real trial. When 4 Nefish leveling casters are placed underneath the equipment, you'll be able to roll it to its destination, possibly by yourself..
  • 【Upgraded Handle Design】- The height of Nefish leveling machine caster can be adjusted by upgraded handle. If you are using delicate lab tools, you might want to ensure each employee's perfect position that uses it. A leveling caster can go up or down, moving the equipment it's attached to along with it..
  • 【Absorb Shocking and Reduce Vibrations】 - Nefish black leveling plate caster wheels are made of rubber pads, stainless steel stamping top plate, aluminum body. Once leveling casters are installed, the rubber pads can absorb the vibrations from the device while it's in operation, This could lead to a safer work environment or, at the very least, a quieter work environment..
  • 【WIDE APPLICATIONS】- Nefish retractable casters uses an anti-vibration rubber pad to secure it to the floor. Once the p....
Check Stock

Homhoo 3" Leveling Plate Caster Wheels with Adjustable Anti-Vibration Leveling Foot Pad Heavy Duty Swivel casters for Workbench, Machine Equipment, Furniture Red Set of 4 Total Capacity 1800 Lbs

  • 1.HEAVY DUTY DOUBLE BALL BEARINGS. The wheel is supported by heavy duty bearings on each side with precision steel balls and, this feature ensures the wheel with lower noise, less friction and more flexible rolling..
  • 2.MADE OF NON-MARKING POLYURETHANE. Adopted non-marking polyurethane as its main material, this caster has a better performance of durability, shock absorption and protection to floors..
  • 3.REINFORCED STEEL PLATE. Swivel plate of this leveling caster is specially designed to be thicker and stronger with our unique cold-rolled technology. When wheel rolling, the load capacity is 250 Lbs per caster and a total of 1000 Lbs with set of 4..
  • 4.MORE STABLE AND DOUBLE HEAVY DUTY. With the leveling foot down to the same height of wheel, the load capacity can be up to 1800 Lbs in total with set of 4 casters. And the leveling foot also serves as furniture leveler for uneven floors, which makes your furniture more stable..
  • 5.CONVENIENT TO DO HOUSEWORK. When you need to do housework like sweeping, just lift up the leveling foot and lower down the wheel so that you can move your furniture easily..
Check Stock

ELEGOO Neptune 2S 3D Printer FDM Printer with Dual Gear Metal Extruder PEI Surface Magnetic Build Plate 3.5 Inch Touch Screen Silent and Quality Printing 220x220x250mm Printing Size

  • All-metal Dual Gear Extruder - Neptune 2S is upgraded to long-lasting dual gear Bowden extruder, providing smoother feeding of filaments, reducing....
  • PEI Sheet Magnetic Plate - Flexible steel build plate covered with PEI surface enables filaments to nicely adhere to the plate without glue, prints....
  • Aluminum Leveling Nuts - Made of high quality aluminum, the nuts are much durable than the plastic ones. Large torques and powerful die springs make....
  • Smart and Silent Printing - Filament detection sensor will pause printing when run out of filament, and can resume printing from the last position.....
  • What You Will Receive - You will receive ELEGOO Neptune 2S 3d printer kit, 4 nozzles and 2 joints as bonus, and professional technical support from....
Check Stock