ReviewsSuspension Mounting

Goldwood Sound GW-206/8 OEM 6.5″ Woofer 180 Watts 8ohm Replacement Speaker

...oofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure – sealed, vented, or open-air.
CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
4.28” MOUNTING DEPTH: Easy to install w/ 4.28″ mounting depth & 8.8″ overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker’s mechanical stability, increasing the life of the speaker.
Blue Injection Molded Cone – Flat Progressive Spider – 600 Watt Max Power Handling – Mounting Depth: 4.28”.
Non-Fatiguing Big Rubber Suspension – New Wave-Like Rubber Gasket – Impedance:4 Ohm (Per Coil).
Bumped Vented Extended Pole Piece – 1.5” High Temperature Dual Kapton Voice Coil – SPL: 83.5dB.
Silver Plated Terminal – Magnet Weight: 60 oz – Overall Diameter: 8.8”.

Check Stock

Redcat Racing 1/10 Scale Brushless Electric Monster Truck - Green

4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, Oil filled big bore shocks, Front and rear gear differentials, Bearings Throughout..
Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle, Multiple shock mounting positions..
Monster power, Blistering top speeds, Low center of gravity chassis for high speed performance, Independent suspension, Aggressive monster truck tires..
550 4400KV Brushless electric motor, Waterproof 80A ESC, Waterproof high torque steering servo, 2.4GHz radio system..
Assembled & Ready to Run - Requires 7.4V LiPO Battery & LiPO Charger - Requires 4-AA Batteries for Transmitter..

Check Stock

Wave 3 Microphone Stand, Professional Mic Boom Arm Stand Compatible with Elgato Wave:3 USB Condenser Microphone by SUNMON

【wave mic arm】- Suspension boom arm stand suitablely fit your Wave 3 mic, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Stability】- wave 3 boom arm is dual suspension springs on each boom arm, protects the Wave microphone from shaking, sinking and making noise..
【Mic stand】-The wave 3 stand can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
【Package】- Included：1x Wave 3 Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED MICROPHONE..

Check Stock

SoloCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX SoloCast Gaming Microphone by SUNMON

【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise..
【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
【Package】- Included：1x HyperX SoloCast Microphone Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED STREAMING MICROPHONE..

Check Stock

Wave 1 Microphone Stand, Professional Mic Boom Arm Stand Compatible with Elgato Wave 1 USB Condenser Microphone by SUNMON

【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your Elgato Wave 1 microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Stability】- The elgato wave 1 mic stand is dual suspension springs on each boom arm, protects the Wave microphone from shaking, sinking and making noise..
【Mic stand】-The elgato 1 arm stand can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
【Package】- Included：1x Elgato Wave 1 Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED MICROPHONE..

Check Stock

Sfeexun Joist Mounted Pull Up Bar Height Adjustable Ceiling Mount Chin Up Bar Heavy Duty Home Gym Strength Training Equipment Max Load 660lbs Mount on Joist

...mounting holes on each stand, offers great stability and rigidity..
【COMFORTABLE HANDLES】- Environmentally friendly non-slip handle, Premium high-density foam provides comfort and safety, the high fiber material can greatly enhance the wear resistance of the foam. so you can work out harder and longer..
【STURDY SUSPENSION RING】- Many training accessories can be attached to the suspension ring on the joist mount pull up bars to offer countless possibilities for your exercises, such as punch bags, resistance bands, power ropes and yoga straps, etc..
【WALL MOUNTED REQUIREMENTS】- Concrete brick/solid cement wall/solid red brick wall /solid tile wall are a great surface for mounting this strength training pull-up bars and dip station. DON'T install on hollow brick wall/honeycomb brick wall/drywall /sandwich panel. Full instructions & all mounting hardware are included..

Check Stock

Bilstein 5100 Monotube Gas Shock Rear Pair Compatible with Ram 2500 3500 4WD

Rear pair of two shock absorbers. For vehicles with no suspension modifications or up to 2.5" rear lift systems..
All necessary washers, bushings, reservoir clamps, and nuts included. Factory shock mounting bolts are reused for installation. Mounting plates sold separately..

Check Stock

Redcat Racing Thunder Drift Gun Metal Car

1/10 scale drift car, 4 wheel drive, Belt driven for smooth power transfer, Independent suspension, Lightweight plastic chassis, Aluminum threaded body oil filled shocks, Bearings throughout..
Tunable suspension, Adjustable ride height, Tunable shocks, Multiple shock mounting positions, Adjustable camber, Adjustable toe angle, Adjustable belt tension..
Hard drift tires, Highly detailed drift body w/ plastic side view mirrors, plastic windshield wipers, and plastic rear wing, Low center of gravity chassis for high speed drift performance..
22T RC540 Brushed electric motor, Waterproof 40A ESC, responsive steering servo, 2.4GHz Radio..
Assembled & Ready to Run - Includes 7.2v 2000mAh NiMH battery & NiMH charger - Requires 4-AA Batteries for transmitter. Please contact Red Cat Racing for troubleshooting issues & other product working related queries at 602-454-6445 or [email protected].

Check Stock

DLP Tactical 4 Point Heavy Duty X Suspension System for ACH/MICH/Fast/Crye AirFrame and Similar Combat Helmet (Black)

Heavy Duty helmet suspension strap system for use when mounting front-heavy NVG systems on your helmet. Improved strap geometry enhances the fit, comfort, and stability of your helmet over stock suspension straps.
Installs in minutes, no modification to helmet required.
Each strap is individually adjustable to fit your head perfectly.
Sweat absorbing suede chin cup and padded X pad for maximum comfort.

Check Stock

Salomon Trigger Mens Snowboard Bindings Black Sz L (10-14)

The Trigger offers a smooth ride and versatility through Blaster Tech—a suspension system built on joints—reducing impact on harsh landings and firm snow..
Equipped with a Shadow Strap for reduced weight and added response, full EVA canted footbeds, and Micromax adjustment, the Trigger claims unprecedented value and freestyle performance..
Blaster Baseplate - Strategically placed Blaster pods provide a dynamic suspension between boot and binding to provide the perfect blend of energy and mobility..
IMS - Integrated Mounting System (IMS) is Salomon’s patented trick for keeping your disc screws in place while adjusting your bindings or swapping out boards..
SCS+ Full EVA - SCS+ Full EVA Offers the highest level of shock absorption and precise energy transmission straight to your edges..

Check Stock

BUCKLOS 26/27.5/29 inch Electric Mountain Bike Air Suspension Inverted Downhill Fork，Thru Axle Boost 15x110mm Travel 140/180mm Rebound Adjust 1-1/8" Straight Tapered Disc Brake Bicycle Front Forks

【Applicable models】Suitable for most 26/27.5/29" mountain bikes and e-bikes. But only if you double check the model and parameters that fit your bike, so that you can be sure to match your bike and give you a good riding experience.(Suspension stroke 140*34mm (single crown)/180*34mm（double crown） , thru Axle Boost:15mm*110mm , tapered tube Mounting 1-1/8"（28.6mm）, disc brake column distance 74mm , for Maximum use is 3.0'' tires.).
【Optimization Upgrade】This mountain bike suspension fork is made of high grade aluminium alloy fork legs and imported air bars, with a 34mm diameter travel tube, making it more robust and less likely to break during speed descents. Weighing in at around 2.7kg (5.9lb)(single crown)/3.5kg (7.7lb)(double crown), the air shock damping makes it lighter and more agile, giving you a better riding experience and equipment. This mountain bike suspension fork fit Mountain Bike AM FR DH ect..
【Adjustment Function】You can adjust the softness of the air suspension according to the riding conditions in different environments by using the two states of the ABS manual coil open/lock. The rebound damping in the front....

Check Stock