ReviewsSwage And Flare 2

Swage It® S750C Primer Pocket Swager for Large and Small Primers - for The Dillon 750, XL750, XL-750

  • This will remove the crimp in the primer pocket that is common in military brass. This will mount to your press and if you use a case feeder you can swage over 1000 rounds / hour!.
  • Engineered to properly swage on the Dillon 750, XL750.
  • Our swager actually re-sizes the primer pocket and adds the correct fillet..
  • The easiest setup available to Swage on your Dillon XL50!7.
Check Stock

Shankly Flaring Tool Set 9 Piece - Professional Grade Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter Not a Double Brake Flaring Tool

  • ✅ ALL-INCLUSIVE KIT: Shankly's standard flaring tool kit includes an all-inclusive professional tubing straightener or cutter, allowing the mechanic....
  • ✅ PRECISE AND CONVERTIBLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the strongest steel materials and....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: This is the only flaring tool set a mechanic will require because it includes flaring tool adapters in the....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool....
Check Stock

Dillon Precision 21079 XL 650 Casefeeder Small Pistol 110v SM Plate 21073 97074

  • The Super Swage 600 comes with: Large and small swage rods, .22 and .30 caliber backup rods, A 45ACP adapter..
Check Stock

LORESO Brake Line Flaring Tool Kit with Swaging Tool Set for 45° Single Flares on Copper Aluminum Brass and Soft Steel Lines Professional Repair and Replacement

  • Professional Flaring and Swaging Tool Kit – A full-service brake line kit with swage tool and other essential accessories this brake line repair kit....
  • Versatile Equipment Compatibility – Our brake line and swage tool kit can be used in copper, aluminum, brass, magnesium, and soft steel lines to....
  • Expanded Sizes to Suit Every Job – This 45° flaring and swaging kit with cones, bars, fittings, tube cutter, and ratchet wrench features sizes....
  • Compact, Portable Storage Case – Each flaring and swage tool set comes with a heavy-duty storage organizer to make it easier to use in a....
  • Trusted Quality, Durability, and Resilience – Here at LORESO we make tools that support rugged jobs and precision craftsmanship which is why every....
Check Stock

Mastercool 71600-A Blue Hydra-Swage Tube Expander Kit,Black

  • DO NOT ACCEPT IMITATIONS: This is the original Hydra-Swage.
  • FABRICATES AND EXPANDS: Copper, aluminum and soft steel tubing using hydraulic power.
  • HAND-HELD HYDAULIC PUMP: Create perfect swages on the job while generating the power necessary to expand tubing up to 1 1/8”.
  • ENHANCE A QUALITY JOB: Eliminates couplings, reduces brazing and number of joints.
  • COMPLETE KIT: Consists of expander heads 3/8, ½, 5/8, ¾, 7/8, 1 and 1 1/8”, hydra-swage, adapter and inner-outer reamer.
Check Stock

Kaka Industrial FSM-16 Metal Shrinker Stretcher, High Quality Manual Metal Forming Shrinker Stretcher With Foot Pedal, 6" Throat Depth, 16 Gauge Mild Steel Capacity

  • Design: Each dapping punch is etched with its no/size and fits well into the wooden base next to their correct numbers for staying organized. This flat dapping box with small and medium sizes, a flat forming block with U-shaped grooves, and a swage block with U-shaped, V-shaped, and flat wire grooves..
  • Features: The smooth dapping block half-sphere cavities help to form perfect dome shapes without leaving any machining mark on metal. This equipment tool set is a vibration-absorbing base that reduces vibration for improved user comfort..
  • Multi Tool and Sizes: One Wooden Base, One Dapping Block 5x2.5x1", One Forming Block 8x1.5x1.5", One Swage Block 2.5x2.5x2", And One Dapping Cube 2.5x2.5x2.5", 36 Dapping Punches {Dimension 1" - 36" Inches ( 3.5mm- 25mm)}..
  • Usage: This jewelry-making metal forming set is great for forming soft metals for coin making, ring making, metal smiths, plus goldsmith & silversmith applications and repairs..
Check Stock

5pc Set - Stainless Steel T316 Lifeline Hand Swage Stud End Fitting- for 1/16 Cable

  • Type 316 Stainless Steel Lifeline Hand Swage Stud End Fitting for Cable Railing- For 1/16" Cable.
  • High Quality - Marine Grade For Maximum Corrosion Resistance.
  • Cable Size: 1/16" - Thread: 1/4" - Thread Length: 1-7/8" - Overall Length: 4-3/16".
  • Includes 5pcs - Each Piece Comes With: Stud, Nut, Washer & Cap Nut ( As Pictured).
  • A Swage Tool Is Required For Crimping - Please See Our Amazon Storefront For Swaging Tool.
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Lug Crimper Tool for 10 AWG - 400 MCM wire lugs- DIELESS Indent Electrical Battery Terminal Cable Wire KH-230

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job....
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we....
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this....
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little....
Check Stock