ReviewsSwage Terminations

Lug Crimper Tool for 10 AWG - 400 MCM wire lugs- DIELESS Indent Electrical Battery Terminal Cable Wire KH-230

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job....
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we....
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this....
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little....
Check Stock

YAETEK Swaging Tool Kit – Flaring Tool Kit - Tube Cutter Rachet Wrench Swag Tool - 45 Degree Brake Line Tubing Brass Aluminum Copper Extrusion 1/8 to 3/4 for HVAC Water Gas Pipe Automotive Plumbing

  • Sizes of This YaeTek Swaging Flaring Tool Kit: Flare adapters 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" OD.
  • Material: Swivel is made of alloy steel, chrome-plated to assist in reducing friction.
  • Yoke is heat-treated forged steel with max strength and....
  • Do your Brake Line Job: This YaeTek Flaring Swaging Tool Kit 10pc Tubing Flaring Kit includes 2 bars (9 sizes) with a self-centering, slip-on yoke to....
  • A CompleteFlaring Tool kit with necessary tools to complete your job.
  • This Tool makes 45 Degree Flares on soft copper, brass, aluminum and mild steel....
  • Package includes flare adapters, swage fittings, refrigeration wrench to open square valves on hose bibs and acetylene tanks, with a Plastic carrying....
Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless.....
Check Stock

Kaka Industrial FSM-16 Metal Shrinker Stretcher, High Quality Manual Metal Forming Shrinker Stretcher With Foot Pedal, 6" Throat Depth, 16 Gauge Mild Steel Capacity

  • Design: Each dapping punch is etched with its no/size and fits well into the wooden base next to their correct numbers for staying organized. This flat dapping box with small and medium sizes, a flat forming block with U-shaped grooves, and a swage block with U-shaped, V-shaped, and flat wire grooves..
  • Features: The smooth dapping block half-sphere cavities help to form perfect dome shapes without leaving any machining mark on metal. This equipment tool set is a vibration-absorbing base that reduces vibration for improved user comfort..
  • Multi Tool and Sizes: One Wooden Base, One Dapping Block 5x2.5x1", One Forming Block 8x1.5x1.5", One Swage Block 2.5x2.5x2", And One Dapping Cube 2.5x2.5x2.5", 36 Dapping Punches {Dimension 1" - 36" Inches ( 3.5mm- 25mm)}..
  • Usage: This jewelry-making metal forming set is great for forming soft metals for coin making, ring making, metal smiths, plus goldsmith & silversmith applications and repairs..
Check Stock

AOWIZ RJ45 Cat5 Cat6 Connector Pass Through RJ45 Ends for Solid Wire and Standard UTP Network Cables 100-Pack

  • ►Category 5/6 Compatibility- RJ45 pass through connector support 24AWG Cat5 Cat6 UTP unshielded twisted pair solid and stranded cables and work with most styles RJ45 pass through crimp tool..
  • ►Enhancing Signal Integrity and Clarity- Pass-through design allows you to pull the twist in each pair closer to the contact, ensuring a solid connection and cutting down on far-end, near-end, pair-to-pair crosstalk, and alien crosstalk..
  • ►Fast and Stable Transmission Speed- Gold plated 8P8C metal connector pins work by piercing the cable jacket and making a great contact with copper wire, cutting down the distance between wire twists and contacts..
  • ►Less Waste and Frustration- Pass-through design simplifies terminations as the wires pass all the way through the RJ45 plug, allowing you to verify the wires are in the correct order before crimping with your rj45 crimp tool and minimize the bad terminations..
  • ►100-pack of RJ45 Cat5 Cat6 Connectors- Provide enough Ethernet connectors while home decoration wiring or add new network devices, allowing you to create your own Ethernet cables in custom length easier..
Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

  • 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
  • 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
  • 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
  • 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
  • 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check Stock

MASTERCOOL 71700 Black Hydraulic Flaring and Swaging Tool

  • HAND-HELD HYDRAULIC PUMP requires a few simple pumps to flare and swage copper tubing.
  • 45˚ FLARE includes sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
  • EXPAND tubing using sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
  • INNER-OUTER REAMER provides a full metal grip and is designed to remove inner burrs easily.
Check Stock

Loos Cableware 668-4X Stainless Steel Eye End for 1/8\ Diameter Wire Rope

  • Convenient package of one swage fitting for 1/8" cable.
  • 316 Stainless Steel Eye End for swaging on to Wire Rope.
  • 316 Stainless Steel for superior corrosion resistance even in salt water environments.
Check Stock

Loos Cableware 667-8X Stainless Steel Fork End for 1/4\ Diameter Wire Rope

  • Convenient package of one swage fitting for 1/4" cable.
  • 316 Stainless Steel Fork End for swaging on to Wire Rope.
  • 316 Stainless Steel for superior corrosion resistance even in salt water environments.
Check Stock

Loos Cableware MS20667-2 Stainless Steel Fork End for 1/16\ Diameter Wire Rope

  • Stainless Steel Marine Eye Swage Fitting.
  • Type 316 Stainless for superior corrosion resistance even in salt water environments.
  • Convenient package of one fitting for 5/32" wire rope.
Check Stock

Crosby 1045096 Shoulder Nut Eye Bolts, Forged Carbon, Galvanized, 3/8\ x 2-1/2\

  • Convenient package of one swage fitting for 3/16" cable.
  • Stainless Steel Fork Fitting for swaging on to Wire Rope and Aircraft Cable.
  • Follow manufacturer's swaging instructions.
Check Stock